KS Just in 71 3/4 with AC, not much rust - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sinned4me · 06-30-2010, 12:21 AM

Hey Randy, front control arm u bolts, Saddle tank on rt side, and did you ever find a LF control arm for 1/2 ton?

**D.PASSMORE** · 06-30-2010, 06:35 AM

"D.Passmore, I need to get them off and get soem help on what they are worth, I'll do some checking"

Randy, I checked on the Summit website and that set is still available for $179.00. Let me know what you think, condition-price.

teeitup · 06-30-2010, 06:49 AM

Dieselwrencher, Ryan, for all the AC stuff in and on cab since I wouldn't have to remove it $100

sinned4me, Dennis, I'll pm you

D.Passmore, David, I'll hopefully have time to get them off and see condition. Thanks for looking those up for me, I found a used completed set on ebay for $90, but these won't be that much, I just want to make sure they are good shape

Thanks Randy

rich67 · 06-30-2010, 08:49 AM

hey randy will take rear bumper if it is our truck specific. it looks it. is dana freed up? if so will pay you? and let me know about front bumper. thanx rich

72shortstep · 06-30-2010, 09:57 AM

Hey Randy, I am interested in the column depending on what kind of shape its in. It looks like an original steering wheel? Also, do you have a key for it? I need some locks and an ignition with a key. 29461 Thanks, Chris.

**70STOVEBOLT** · 06-30-2010, 11:20 AM

Randy, how about the battery hold down shipped to 46562? Also, do you have any later junk p/s pumps that would have a good 2-groove pulley? I don't need the pump, just the
pulley, also shipped to 46562.

Thanks,
Mark

**michael bustamante** · 06-30-2010, 11:27 AM

still interested in those bowtie fender emblems too

thanks
Mike b

teeitup · 06-30-2010, 12:21 PM

rich67, Rich, the bumper is for our years. Yes rearend is free, rolls easily. I'll check front bumper tonight, I think it has a bend in it but not sure

72shortstep, Chris, I'll check condition on column, sorry no keys for it

70stovebolt, Mark, How's $5 shipped for holddown? Sorry no other pumps right now

Michael Bustamonte, Mike, they are not complete, someone just broke off the top part of 67-68 emblems

Thanks Randy

Belairbob · 06-30-2010, 12:59 PM

Hey Randy, I would like the gate if shipping isn't a killer. Could
you quote me a price with shipping to 27502 ? Thanks, Bob

**70STOVEBOLT** · 06-30-2010, 01:23 PM

Randy, I'll take the holddown, I'll paypal it in a couple minutes. Can you throw the bolt in also? My current hold down consists of a 10" bungy cord.

Thanks,
Mark

astevens · 06-30-2010, 01:51 PM

It that a 4 core radiator? If so how much for the top and bottom mounts? Thanks.

Aaron

BCOWANWHEELS · 06-30-2010, 03:33 PM

randy, I want the p/s pump,pulley and mounts, alt mounts also crank and water pump pulley. pm me the total with shipping to 37664
bob in tn.

xrod · 06-30-2010, 07:36 PM

Randy, how much for the spindles, rotors, upper and lower a-arms?

**FL71C10** · 06-30-2010, 07:52 PM

Don"t forget I am still #1in line for power brake setup. You were going to see if holds brake fluid

teeitup · 06-30-2010, 07:56 PM

xrod, sorry I sell the front ends complete

FL71C10, I'm out there right now parting it some. I checked the pedal and it has brakes

Guys I'll get pics posted hopefully soon

Thanks Randy

blue_69 · 06-30-2010, 09:05 PM

put me in line for the tailgate. how much would shipping be to 13090. thanks, jason

chevytruckluver · 06-30-2010, 09:08 PM

how much for the doggie kennel in the bed?

teeitup · 06-30-2010, 09:32 PM

Sorry I missed a couple of you guys questions

Belairbob, Bob, I'd guess $40, but when I get it off I can get you a firm quote?

70stovebolt, Mark, I'll get it out to you

Astevens, Aaron, $27 shipped for set of 4, there is a pic coming

bcowanwheels, Bob, I got it all off, I'm not sure if it all is 71 stuff, please look at pics

blue_69, Jason, your 2nd in line, guessing shipping at $40 until I get it off and get a firm weight

chevytruckluver, I was waiting for someone to ask

Thanks Randy

teeitup · 06-30-2010, 09:34 PM

pics for everyone

Bob, power steering set up, pulley has one ding in it. Lower Alt bracket is missing spacer for alt bolt. Water pump pulley is down lower. Crank pullies are a little bigger than what I was thinking they should be.

teeitup · 06-30-2010, 09:36 PM

moooooooooo

teeitup · 06-30-2010, 09:37 PM

nbbbbbbbbb

**thelonerife** · 06-30-2010, 09:37 PM

I'll get in line on the valve covers Randy.

teeitup · 06-30-2010, 09:38 PM

vcvvvvvvv

teeitup · 06-30-2010, 09:39 PM

pic for Arrington01

OK valve cover are not bad, a couple small nick/dings in ridges, see the one pic. They need a good cleaning. I'm not sure on the cracks inside, they may be like that from factory, no cracks on outside. $70 plus shipping for pair
order asked
D.passmore
Michaelbustamonte
72 Super
thelonerife

teeitup · 06-30-2010, 09:40 PM

more valve cover pics

Pics of front bumper. Not bad shape, its a little wavey on top on drivers side, see pic. $40 for it and all brackets

pic of back bumper, good shape, has a outlet for trailer lights on top side, left of tag

06-30-2010, 12:21 AM	#26
sinned4me Registered User Join Date: Jan 2009 Location: topeka, ks Posts: 49	Re: Just in 71 3/4 with AC, not much rust Hey Randy, front control arm u bolts, Saddle tank on rt side, and did you ever find a LF control arm for 1/2 ton?

06-30-2010, 06:35 AM	#27
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,054	Re: Just in 71 3/4 with AC, not much rust "D.Passmore, I need to get them off and get soem help on what they are worth, I'll do some checking" Randy, I checked on the Summit website and that set is still available for $179.00. Let me know what you think, condition-price. __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

06-30-2010, 06:49 AM	#28
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Just in 71 3/4 with AC, not much rust Dieselwrencher, Ryan, for all the AC stuff in and on cab since I wouldn't have to remove it $100 sinned4me, Dennis, I'll pm you D.Passmore, David, I'll hopefully have time to get them off and see condition. Thanks for looking those up for me, I found a used completed set on ebay for $90, but these won't be that much, I just want to make sure they are good shape Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-30-2010, 08:49 AM	#29
rich67 Registered User Join Date: Aug 2009 Location: New Canton, Il Posts: 1,857	Re: Just in 71 3/4 with AC, not much rust hey randy will take rear bumper if it is our truck specific. it looks it. is dana freed up? if so will pay you? and let me know about front bumper. thanx rich

06-30-2010, 09:57 AM	#30
72shortstep lovin' the lowcountry Join Date: Apr 2010 Location: Moncks Corner, SC Posts: 138	Re: Just in 71 3/4 with AC, not much rust Hey Randy, I am interested in the column depending on what kind of shape its in. It looks like an original steering wheel? Also, do you have a key for it? I need some locks and an ignition with a key. 29461 Thanks, Chris. __________________ Chris 29461 72 SWB stepside 71 SWB stepside DRIVE IT LIKE YOU STOLE IT!

06-30-2010, 11:20 AM	#31
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,353	Re: Just in 71 3/4 with AC, not much rust Randy, how about the battery hold down shipped to 46562? Also, do you have any later junk p/s pumps that would have a good 2-groove pulley? I don't need the pump, just the pulley, also shipped to 46562. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

06-30-2010, 11:27 AM	#32
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,858	Re: Just in 71 3/4 with AC, not much rust still interested in those bowtie fender emblems too thanks Mike b __________________ 1967custom

06-30-2010, 12:21 PM	#33
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Just in 71 3/4 with AC, not much rust rich67, Rich, the bumper is for our years. Yes rearend is free, rolls easily. I'll check front bumper tonight, I think it has a bend in it but not sure 72shortstep, Chris, I'll check condition on column, sorry no keys for it 70stovebolt, Mark, How's $5 shipped for holddown? Sorry no other pumps right now Michael Bustamonte, Mike, they are not complete, someone just broke off the top part of 67-68 emblems Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-30-2010, 12:59 PM	#34
Belairbob Registered User Join Date: Jun 2006 Location: NC Posts: 105	Re: Just in 71 3/4 with AC, not much rust Hey Randy, I would like the gate if shipping isn't a killer. Could you quote me a price with shipping to 27502 ? Thanks, Bob

06-30-2010, 01:23 PM	#35
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,353	Re: Just in 71 3/4 with AC, not much rust Randy, I'll take the holddown, I'll paypal it in a couple minutes. Can you throw the bolt in also? My current hold down consists of a 10" bungy cord. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

06-30-2010, 01:51 PM	#36
astevens Registered User Join Date: May 2008 Location: Clarksburg, WV Posts: 335	Re: Just in 71 3/4 with AC, not much rust It that a 4 core radiator? If so how much for the top and bottom mounts? Thanks. Aaron

06-30-2010, 03:33 PM	#37
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: Just in 71 3/4 with AC, not much rust randy, I want the p/s pump,pulley and mounts, alt mounts also crank and water pump pulley. pm me the total with shipping to 37664 bob in tn. __________________ I BELIEVE IN JOHN 3:16

06-30-2010, 07:36 PM	#38
xrod Registered User Join Date: Apr 2010 Location: VA Beach, VA Posts: 5	Re: Just in 71 3/4 with AC, not much rust Randy, how much for the spindles, rotors, upper and lower a-arms?

06-30-2010, 07:52 PM	#39
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,508	Re: Just in 71 3/4 with AC, not much rust Don"t forget I am still #1in line for power brake setup. You were going to see if holds brake fluid __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

06-30-2010, 07:56 PM	#40
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Just in 71 3/4 with AC, not much rust xrod, sorry I sell the front ends complete FL71C10, I'm out there right now parting it some. I checked the pedal and it has brakes Guys I'll get pics posted hopefully soon Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

06-30-2010, 09:05 PM	#41
blue_69 someday Join Date: Dec 2001 Location: canastota,new york Posts: 629	Re: Just in 71 3/4 with AC, not much rust put me in line for the tailgate. how much would shipping be to 13090. thanks, jason __________________ Click Here to search ebay for all 67-72 parts My 72 CST blazer build 72 CST Blazer 4x4 67 2wd swb ( project onion crate ) 86 4x4 lwb plow truck 40 x 60 foot barn to work on all this stuff

06-30-2010, 09:08 PM	#42
chevytruckluver Eat, Sleep, Drive a Chevy Join Date: Apr 2010 Location: the town of the cow, Texas Posts: 1,152	Re: Just in 71 3/4 with AC, not much rust how much for the doggie kennel in the bed?

06-30-2010, 09:32 PM	#43
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Just in 71 3/4 with AC, not much rust Sorry I missed a couple of you guys questions Belairbob, Bob, I'd guess $40, but when I get it off I can get you a firm quote? 70stovebolt, Mark, I'll get it out to you Astevens, Aaron, $27 shipped for set of 4, there is a pic coming bcowanwheels, Bob, I got it all off, I'm not sure if it all is 71 stuff, please look at pics blue_69, Jason, your 2nd in line, guessing shipping at $40 until I get it off and get a firm weight chevytruckluver, I was waiting for someone to ask Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 06-30-2010 at 09:33 PM.

06-30-2010, 09:34 PM	#44
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Just in 71 3/4 with AC, not much rust pics for everyone Bob, power steering set up, pulley has one ding in it. Lower Alt bracket is missing spacer for alt bolt. Water pump pulley is down lower. Crank pullies are a little bigger than what I was thinking they should be. Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 06-30-2010 at 09:49 PM.

06-30-2010, 09:36 PM	#45
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Just in 71 3/4 with AC, not much rust moooooooooo Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-30-2010, 09:37 PM	#46
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Just in 71 3/4 with AC, not much rust nbbbbbbbbb Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-30-2010, 09:37 PM	#47
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: Just in 71 3/4 with AC, not much rust I'll get in line on the valve covers Randy. __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

06-30-2010, 09:38 PM	#48
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Just in 71 3/4 with AC, not much rust vcvvvvvvv Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-30-2010, 09:39 PM	#49
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Just in 71 3/4 with AC, not much rust pic for Arrington01 OK valve cover are not bad, a couple small nick/dings in ridges, see the one pic. They need a good cleaning. I'm not sure on the cracks inside, they may be like that from factory, no cracks on outside. $70 plus shipping for pair order asked D.passmore Michaelbustamonte 72 Super thelonerife Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 06-30-2010 at 10:12 PM.

06-30-2010, 09:40 PM	#50
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Just in 71 3/4 with AC, not much rust more valve cover pics Pics of front bumper. Not bad shape, its a little wavey on top on drivers side, see pic. $40 for it and all brackets pic of back bumper, good shape, has a outlet for trailer lights on top side, left of tag Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 06-30-2010 at 09:54 PM.

Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode