Went and look at a 67 today... pulled the tigger - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jkade · 08-09-2010, 08:15 PM

Quote:

Originally Posted by C low

slap bondo over rust yeah rust fixed lol!! looks like some work but also looks like its in capable hands..

We will see about the capable hands

I have confidence that I can make a nice truck out of this.

jkade · 08-09-2010, 08:20 PM

Quote:

Originally Posted by prostreetC-10

I'm actaully surprised you are not farthur along than you are. It has been almost 3 days but those were weekend days. What's the delay? Come on....I've had time to video a burnout and post it!!!!! what's taking so long???

LOL

Come on now... I do have a day job

There is probably not going to be much progress until I see what the job situation is. That is why I have really not done anything to my trazer lately. I hate my job with a passion and I am the most unhappy I have ever been in my life because of my job. Hopefully in October this will change and I will get a new job...... we will see.

Zoomin · 08-09-2010, 10:46 PM

What are your plans on how to get this bed in shape? Can it be saved, or what?

jkade · 08-10-2010, 09:15 AM

Quote:

Originally Posted by Zoomin

What are your plans on how to get this bed in shape? Can it be saved, or what?

I have got to get it outside and get it pressure washed and see how bad it is. A lot of what you are seeing there is just dirt, I noticed when I was taking the drive shaft loose that is had a few small rust holes but it didn't look that bad from underneath. In the end it will at least get a spray on bedliner on the bed floor as I want to be able to throw a cooler and such in the bed and not have to worry about scratching it up.

jkade · 08-11-2010, 05:47 PM

What would ya'll say that truck was worth in the condition it was in before I tore it apart? What would you have give for it?

red71cheyenne · 08-11-2010, 07:49 PM

I would have thought from the before pics it was a 15-3K truck. Until you found all the bondo that is. Not sure what they run in your neck of the woods though.

JRBECK64 · 08-11-2010, 08:46 PM

Isn't it amazing how much of that rust can hide from you!!! I have a 67 small window cab that needs major work so I feel your pain. Good Luck and keep the pictures coming.

JRBECK64

jkade · 08-11-2010, 10:36 PM

I figured out it is a 68 not a 67.... oh well doesn't really matter to me. I didn't give but $1800 for it so I still don't think I am hurt to bad. I may have the motor and trans sold for $300 and if I can sell the wheels for $100 I won't have but $1400 in it and I may sell the seat that was in it and I would think it would be worth $200 as it has been recoverd and looks real good. So then I wouldn't have but $1200 in it.

jkade · 08-11-2010, 10:39 PM

Quote:

Originally Posted by JRBECK64

Isn't it amazing how much of that rust can hide from you!!! I have a 67 small window cab that needs major work so I feel your pain. Good Luck and keep the pictures coming.

JRBECK64

I knew it had some rust issues but it really isn't that bad for what it is and what I paid for it. If I would have paid over $4000 or $5000 I would be going to break some legs

jkade · 08-13-2010, 10:12 AM

Man...... I miss my baby

I found these on the computer, thought I would post them.

Zoomin · 08-13-2010, 10:57 AM

I can see why, that's sharp!

jkade · 08-13-2010, 10:03 PM

Quote:

Originally Posted by Zoomin

I can see why, that's sharp!

Thanks, that is why I bought the 68. I really regret selling that 67, it was a handfull with the ls1.

Zoomin · 08-13-2010, 10:34 PM

Oh geeee - it had an LS1 and you sold it???!!!!

jkade · 08-13-2010, 10:48 PM

Quote:

Originally Posted by Zoomin

Oh geeee - it had an LS1 and you sold it???!!!!

Yes

The wife was pregnant a I needed the money for a kid friendly truck.

ed2552 · 08-13-2010, 10:56 PM

New truck is looking good. I wish I had that kind of ambition, lol.

Old truck was a great looking truck, but no truck is ever more important than your family. Trucks can be bought, fixed and sold, family only happens once, and is forever.

jkade · 08-13-2010, 11:01 PM

Quote:

Originally Posted by ed2552

New truck is looking good. I wish I had that kind of ambition, lol.

Old truck was a great looking truck, but no truck is ever more important than your family. Trucks can be bought, fixed and sold, family only happens once, and is forever.

Amen... Good thing is I sold it for enough to buy my 06 crew cab gmc and it is paid for.

bmfpeterson · 08-24-2010, 04:23 PM

nice that truck is f###n Clean.. what wheels are they?

jkade · 08-24-2010, 05:06 PM

Quote:

Originally Posted by bmfpeterson

nice that truck is f###n Clean.. what wheels are they?

Those were Torq Thrust II's on the red truck, 20x8 and 20x10. Thanks I really miss that truck!!!

VA72C10 · 08-27-2010, 08:36 PM

so are you going to shave the markers correctly and make it a 67 to look like your old one? Or keeping it a 68 and going with a different look?

jkade · 08-27-2010, 10:42 PM

Quote:

Originally Posted by VA72C10

so are you going to shave the markers correctly and make it a 67 to look like your old one? Or keeping it a 68 and going with a different look?

I might leave it a 68 since my blazer has 68 fenders. I really like the look of not having the marker lights too.

Silverbird · 08-27-2010, 11:11 PM

Quote:

Originally Posted by jkade

Those were Torq Thrust II's on the red truck, 20x8 and 20x10. Thanks I really miss that truck!!!

If its any solice know that I am taking care of it.
I have to post some pics. I have done quite a bit to it since I've had it.
This tuck is a hoot. I can light em up at any speed.
I embarassed a guy with a souped up G8 the other day. He pulled up with a supercharger whine and smiled like "watch this", a minute later he was making a left turn to save face.

Zoomin · 08-27-2010, 11:42 PM

Quote:

Originally Posted by Silverbird

If its any solice know that I am taking care of it.
I have to post some pics. I have done quite a bit to it since I've had it.
This tuck is a hoot. I can light em up at any speed.
I embarassed a guy with a souped up G8 the other day. He pulled up with a supercharger whine and smiled like "watch this", a minute later he was making a left turn to save face.

Ahem....

FRENCHBLUE72 · 08-28-2010, 09:47 AM

Id like to see some updated pics of it also... Jkade hope this project moves along a little faster than the other one .......

jkade · 08-29-2010, 09:21 PM

Quote:

Originally Posted by Silverbird

If its any solice know that I am taking care of it.
I have to post some pics. I have done quite a bit to it since I've had it.
This tuck is a hoot. I can light em up at any speed.
I embarassed a guy with a souped up G8 the other day. He pulled up with a supercharger whine and smiled like "watch this", a minute later he was making a left turn to save face.

Glad to hear she is holding up!!!!!! Post some pics up and really make me sick

Folks probably think I am blowing smoke up their butts but that truck was handfull. I wish I still had it!!!!

jkade · 08-29-2010, 09:24 PM

Quote:

Originally Posted by FRENCHBLUE72

Id like to see some updated pics of it also... Jkade hope this project moves along a little faster than the other one .......

We will see

I am working on both right now. I wish I had $40000 to blow and I could finish both!!

08-09-2010, 10:46 PM	#28
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: Went and looke at a 67 today... pulled the tigger What are your plans on how to get this bed in shape? Can it be saved, or what? __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro

08-11-2010, 05:47 PM	#30
jkade Senior Member Join Date: Nov 2005 Location: AL Posts: 2,517	Re: Went and looke at a 67 today... pulled the tigger What would ya'll say that truck was worth in the condition it was in before I tore it apart? What would you have give for it?

08-11-2010, 07:49 PM	#31
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Re: Went and looke at a 67 today... pulled the tigger I would have thought from the before pics it was a 15-3K truck. Until you found all the bondo that is. Not sure what they run in your neck of the woods though. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

08-11-2010, 08:46 PM	#32
JRBECK64 Registered User Join Date: Sep 2008 Location: Cornelius Oregon Posts: 1,073	Re: Went and looke at a 67 today... pulled the tigger Isn't it amazing how much of that rust can hide from you!!! I have a 67 small window cab that needs major work so I feel your pain. Good Luck and keep the pictures coming. JRBECK64

08-11-2010, 10:36 PM	#33
jkade Senior Member Join Date: Nov 2005 Location: AL Posts: 2,517	Re: Went and looke at a 67 today... pulled the tigger I figured out it is a 68 not a 67.... oh well doesn't really matter to me. I didn't give but $1800 for it so I still don't think I am hurt to bad. I may have the motor and trans sold for $300 and if I can sell the wheels for $100 I won't have but $1400 in it and I may sell the seat that was in it and I would think it would be worth $200 as it has been recoverd and looks real good. So then I wouldn't have but $1200 in it.

08-13-2010, 10:12 AM	#35
jkade Senior Member Join Date: Nov 2005 Location: AL Posts: 2,517	Re: Went and looke at a 67 today... pulled the tigger Man...... I miss my baby I found these on the computer, thought I would post them. Last edited by jkade; 08-13-2010 at 10:15 AM.

08-13-2010, 10:57 AM	#36
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: Went and look at a 67 today... pulled the tigger I can see why, that's sharp! __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro

08-13-2010, 10:34 PM	#38
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: Went and look at a 67 today... pulled the tigger Oh geeee - it had an LS1 and you sold it???!!!! __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro

08-13-2010, 10:56 PM	#40
ed2552 Registered User Join Date: Jan 2007 Location: Charles City IA Posts: 1,626	Re: Went and look at a 67 today... pulled the tigger New truck is looking good. I wish I had that kind of ambition, lol. Old truck was a great looking truck, but no truck is ever more important than your family. Trucks can be bought, fixed and sold, family only happens once, and is forever. __________________ '67 C20, Under the Knife!, LWB, Eaton HO-52, Rear Coil Springs 72' GMC C2500, 350, TH400(?), Dana 60 '67 K10 4-spd., 305, SM465, Dana 44, 12 Bolt, RUST! '65 C60 292, 4 spd, 2 spd Rearend, 15' Grain Box, MINT! 09 Yukon Denali 82k Miles 6.2L/6A

08-24-2010, 04:23 PM	#42
bmfpeterson Registered User Join Date: Jul 2008 Location: Queen Creek, AZ Posts: 538	Re: Went and look at a 67 today... pulled the tigger nice that truck is f###n Clean.. what wheels are they?

08-27-2010, 08:36 PM	#44
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Went and look at a 67 today... pulled the tigger so are you going to shave the markers correctly and make it a 67 to look like your old one? Or keeping it a 68 and going with a different look? __________________ Looking for a 67-72 swb or blazer project in or around VA.

08-28-2010, 09:47 AM	#48
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Went and look at a 67 today... pulled the tigger Id like to see some updated pics of it also... Jkade hope this project moves along a little faster than the other one ....... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.