ME 68 parts

[no moa]

The seal is no good, but the window looks ok
Posted via Mobile Device

[Toms1968]

What do you need for it, how much would shipping run? The zip here is 10952. I'm new here how else can I contact you?

[NGN]

What conditoin are the mirror brackets in after thirty years ?

[no moa]

Originally Posted by NGN

What conditoin are the mirror brackets in after thirty years ?

Badly rusted, the broke when I tried to remove them.
Posted via Mobile Device

[Cruisin' Oklahoma]

what condition are the door striker and plates in?

[no moa]

Originally Posted by Cruisin' Oklahoma

what condition are the door striker and plates in?

check for ya.

[425HP409]

If you do not sell the engine complete I am interested in the air cleaner with spacer and breather pipe and hose to valve cover.

[rbpedersen]

Do you have the front drum brakes and hubs for a 68 gmc 1/2 ton

[no moa]

Originally Posted by rbpedersen

Do you have the front drum brakes and hubs for a 68 gmc 1/2 ton

Have the hubs, the brakes are frozen up and i'm sure no good.

[DaSchlange]

Awesome, I will check back soon then. If it is a 250 and you are parting it out, PM me because I am very interested.

[no moa]

Originally Posted by DaSchlange

Awesome, I will check back soon then. If it is a 250 and you are parting it out, PM me because I am very interested.

Your alset, you should have pics tonight of the piece you are looking for. I have a couple still on the motors.

[DaSchlange]

Originally Posted by no moa

Your alset, you should have pics tonight of the piece you are looking for. I have a couple still on the motors.

Sounds awesome, just get them to me when you can. Do you also have a good condition heater tube? I don't know the correct name for it, but it's the piece that bolted over the exhaust manifold and ran up to the intake filter and allowed it to have warmer hair circulation. Thanks!

[hoss67]

Is the rear end a posi? If so I would be interested in just the posi unit? Pending pics. Thanks Randy

[projectjimmie68]

Thanks---------- Please let me know about the other truck as soon as you get it. Thanks again projectjimmie---------------

[no moa]

Originally Posted by hoss67

Is the rear end a posi? If so I would be interested in just the posi unit? Pending pics. Thanks Randy

It is not, it was a super base truck. The label in the glove box had one thing on it, was the paint color. lol

[68C10HotRod]

Do you still have the front fender eyebrow trim? Did it have a decent one across the hood between the brows? LMK price & shipping to 68134 if you do.

[no moa]

Originally Posted by 68C10HotRod

Do you still have the front fender eyebrow trim? Did it have a decent one across the hood between the brows? LMK price & shipping to 68134 if you do.

PM sent

[LandonL]

Have you had a chance to take that exhaust manifold off yet, we've been corresponding through email.

[bestchevyfan]

Hi, i will take the door panels how much is cheap ? And how do you wamt to get paid. Thanks,buddy

[no moa]

Originally Posted by bestchevyfan

Hi, i will take the door panels how much is cheap ? And how do you wamt to get paid. Thanks,buddy

$50 shipped (80% of that is shipping) + 3% if you use paypal

[no moa]

Originally Posted by LandonL

Have you had a chance to take that exhaust manifold off yet, we've been corresponding through email.

Yes

[b.sharp]

Did this have any orange seat belts? I need center pieces for my 70, I have the outer retractable pieces.

Thank you,

[no moa]

Originally Posted by b.sharp

Did this have any orange seat belts? I need center pieces for my 70, I have the outer retractable pieces.

Thank you,

I think they are red, but i'll check.

[no moa]

Originally Posted by b.sharp

Did this have any orange seat belts? I need center pieces for my 70, I have the outer retractable pieces.

Thank you,

Look like they are red, not orange sir.

[Toms1968]

do you have the flywheel and clutch mounts, Z bar frame mount, block mount? Shipping to 10952? Thanks