Dynatech MuscleMaxx Headers - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

flamingbig10 · 02-27-2011, 04:04 PM

there different, there are different headers that fit but they are shorties or there twice as much as these or more and there only mid lengths

shrunken66stroker · 02-28-2011, 01:53 AM

Help me out with a measurement if you would. I'd love to know the height from the very top of the upper primary to the lowest point. Thanks

**Clyde65** · 02-28-2011, 11:14 AM

so flaming, they work on a square? or?

jhln8c · 02-28-2011, 11:33 AM

Are you going to be able to use the stock wire for cylinder #5

flamingbig10 · 02-28-2011, 09:09 PM

those aren't my pics there from a different site and not for sure if they really fit

flamingbig10 · 03-07-2011, 11:33 PM

I went a head and got some hooker super comp 64-72 chevelle headers

85burb · 03-08-2011, 12:36 AM

Looks like a good fit. Did you have to do any thing to make them fit? What mount plates you using?

flamingbig10 · 03-08-2011, 12:56 AM

I'm using the dirty dingo mounts around the stock position, I haven't had to do any trimming yet but I will a little on the the trans mission ears that stick out, On the passenger side the tube are real close to starter so I will use some type of heat there or and mini starter

85burb · 03-08-2011, 01:06 AM

That is the same plates i have! Look way better then the f body set i tryed. Thanks

shrunken66stroker · 03-09-2011, 11:55 PM

Wow. They look great. I just got an email from Speedway Motors saying they cancelled my order for the Dynatech 70-81 Camaro swap headers. They don't make them anymore and Speedway recently sold their last pair. I'll be looking at the Hookers for sure. They've got to be more expensive than the Dynamax. Where did you get them, flamingbig10?

shrunken66stroker · 03-10-2011, 01:03 AM

Wow, the Hookers are $300 more than the Dynatechs.

68GMCCustom · 03-10-2011, 11:15 AM

wow.....Dynatech dropped them? I just recieved one of their new 2011 catalogs and they listed them in it.

Dynatech also offers LSx swap headers for the '67-'69 Camaro's and the early (pre-'75) Nova's...and I think even the pre '73 Chevelle's, but I don't have the catalog handy.

shrunken66stroker · 03-10-2011, 11:56 AM

I haven't seen anyone use the other Dynatech's for swap in trucks. I'd love to know how they fit.
Jegs has the 70-81 Camaro swap headers with the 1 3/4 to 1 7/8 step primaries in stock for $400. I might just pull the trigger on those. The Hookers look great but I can't afford to drop $700 on them right now.

flamingbig10 · 03-11-2011, 12:11 AM

thanks, yes these headers were a little pricey but I need to get this truck so I got these

shrunken66stroker · 03-11-2011, 02:45 AM

Just bought the 70-81 Camaro 1 3/4 to 1 7/8 step to 3" from Jegs.

68 short step · 03-12-2011, 10:11 PM

Quote:

Originally Posted by shrunken66stroker

Just bought the 70-81 Camaro 1 3/4 to 1 7/8 step to 3" from Jegs.

whats the part number of the ones you're talking about?

shrunken66stroker · 03-12-2011, 10:56 PM

329-740-29310 is what it says on the invoice. I'll post pics when they get here. They're supposed to arrive on Friday.

softballnrd27 · 03-13-2011, 12:37 AM

That part number says they are for a small block chevy

shrunken66stroker · 03-13-2011, 02:13 AM

You're right. I just called FedEx and had them turn the shipment around to Jegs. softballnrd27, I owe you a beer. You probably just saved me 40-50 bucks in shipping that I would have had to pay if they had gotten all the way to my house. Thank You!

softballnrd27 · 03-13-2011, 03:55 AM

Not a problem, I was going to get the steps too but when I looked at the part number it was SBC not LS. I have only been able to fnd the 67-69 part number but I don't know if they will fit or not. Good thing is that I have 6 months to wait.

68GMCCustom · 03-13-2011, 01:48 PM

several stepped ones are available for a sbc. Dynatech's available LSx headers are not stepped, and not painted...they come coated only, and for $399. Dynatech's SuperMaxx series for new/newish factory LSx powered cars is also available but they start at like $859!

Part#'s from the Dynatech 2001 catalog for '70-'81 Camaro are:
1 7/8" x 3" LSx coated header- #715-29410 w/3" reducers
1 7/8" x 3" LSx coated header - #715-19410 w/2.5" reducers

Part#'s from the Dynatech 2001 catalog for '67-'69 Camaro are:
1 7/8" x 3" LSx coated header- #715-21410 w/3" reducers
1 7/8" x 3" LSx coated header - #715-11410 w/2.5" reducers

Part#'s from the Dynatech 2001 catalog for '68-'74 Nova (same as 1st gen Camaro?)are:
1 7/8" x 3" LSx coated header- #715-21410 w/3" reducers
1 7/8" x 3" LSx coated header - #715-11410 w/2.5" reducers

shrunken66stroker · 03-14-2011, 12:40 AM

The problem is that Speedway Motors is out of the 70-81 Camaro swap headers and the only other place I can find them is Jegs for $719. Do you know of anywhere else that has them for $399?

68GMCCustom · 03-31-2011, 11:01 PM

Summit sells them for $399 and lists a 4/13 ship date if bought today.
http://www.summitracing.com/dynatech

BigShoe24 · 09-06-2011, 09:47 PM

Any idea of the length of the black line? Thanks

85burb · 09-09-2011, 11:33 PM

Do you have your body on yet? Was wondering if they cleared the shifter linkage.

02-27-2011, 04:04 PM	#26
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: Dynatech MuscleMaxx Headers there different, there are different headers that fit but they are shorties or there twice as much as these or more and there only mid lengths __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326 Last edited by flamingbig10; 02-27-2011 at 04:12 PM.

02-28-2011, 01:53 AM	#27
shrunken66stroker Registered User Join Date: Jan 2008 Location: Las Vegas, Nv Posts: 954	Re: Dynatech MuscleMaxx Headers Help me out with a measurement if you would. I'd love to know the height from the very top of the upper primary to the lowest point. Thanks Attached Images __________________ http://67-72chevytrucks.com/vboard/s...54#post3194654

02-28-2011, 11:14 AM	#28
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: Dynatech MuscleMaxx Headers so flaming, they work on a square? or? __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

02-28-2011, 11:33 AM	#29
jhln8c Registered User Join Date: Jun 2010 Location: Missouri Posts: 17	Re: Dynatech MuscleMaxx Headers Are you going to be able to use the stock wire for cylinder #5 __________________ Jason 1985 Chevrolet K10 LQ4 swap under way

02-28-2011, 09:09 PM	#30
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: Dynatech MuscleMaxx Headers those aren't my pics there from a different site and not for sure if they really fit __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

03-07-2011, 11:33 PM	#31
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: Dynatech MuscleMaxx Headers I went a head and got some hooker super comp 64-72 chevelle headers __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326 Last edited by flamingbig10; 03-07-2011 at 11:42 PM.

03-08-2011, 12:36 AM	#32
85burb Registered User Join Date: Dec 2009 Location: lindale,tx Posts: 2,373	Re: Dynatech MuscleMaxx Headers Looks like a good fit. Did you have to do any thing to make them fit? What mount plates you using? __________________ 82 c10 5.3/4l60 84 c20 5.3/sm465 85 chevy k10 suburban LQ4/4l60 91 chevy c10 suburban Lsa 5.3/4l60 2017 Silverado whipple 5.3 1964 Vw beetle 1974 vw beetle

03-08-2011, 12:56 AM	#33
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: Dynatech MuscleMaxx Headers I'm using the dirty dingo mounts around the stock position, I haven't had to do any trimming yet but I will a little on the the trans mission ears that stick out, On the passenger side the tube are real close to starter so I will use some type of heat there or and mini starter __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

03-08-2011, 01:06 AM	#34
85burb Registered User Join Date: Dec 2009 Location: lindale,tx Posts: 2,373	Re: Dynatech MuscleMaxx Headers That is the same plates i have! Look way better then the f body set i tryed. Thanks __________________ 82 c10 5.3/4l60 84 c20 5.3/sm465 85 chevy k10 suburban LQ4/4l60 91 chevy c10 suburban Lsa 5.3/4l60 2017 Silverado whipple 5.3 1964 Vw beetle 1974 vw beetle

03-09-2011, 11:55 PM	#35
shrunken66stroker Registered User Join Date: Jan 2008 Location: Las Vegas, Nv Posts: 954	Re: Dynatech MuscleMaxx Headers Wow. They look great. I just got an email from Speedway Motors saying they cancelled my order for the Dynatech 70-81 Camaro swap headers. They don't make them anymore and Speedway recently sold their last pair. I'll be looking at the Hookers for sure. They've got to be more expensive than the Dynamax. Where did you get them, flamingbig10? __________________ http://67-72chevytrucks.com/vboard/s...54#post3194654

03-10-2011, 01:03 AM	#36
shrunken66stroker Registered User Join Date: Jan 2008 Location: Las Vegas, Nv Posts: 954	Re: Dynatech MuscleMaxx Headers Wow, the Hookers are $300 more than the Dynatechs. __________________ http://67-72chevytrucks.com/vboard/s...54#post3194654

03-10-2011, 11:15 AM	#37
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: Dynatech MuscleMaxx Headers wow.....Dynatech dropped them? I just recieved one of their new 2011 catalogs and they listed them in it. Dynatech also offers LSx swap headers for the '67-'69 Camaro's and the early (pre-'75) Nova's...and I think even the pre '73 Chevelle's, but I don't have the catalog handy. __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

03-10-2011, 11:56 AM	#38
shrunken66stroker Registered User Join Date: Jan 2008 Location: Las Vegas, Nv Posts: 954	Re: Dynatech MuscleMaxx Headers I haven't seen anyone use the other Dynatech's for swap in trucks. I'd love to know how they fit. Jegs has the 70-81 Camaro swap headers with the 1 3/4 to 1 7/8 step primaries in stock for $400. I might just pull the trigger on those. The Hookers look great but I can't afford to drop $700 on them right now. __________________ http://67-72chevytrucks.com/vboard/s...54#post3194654

03-11-2011, 12:11 AM	#39
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: Dynatech MuscleMaxx Headers thanks, yes these headers were a little pricey but I need to get this truck so I got these __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

03-11-2011, 02:45 AM	#40
shrunken66stroker Registered User Join Date: Jan 2008 Location: Las Vegas, Nv Posts: 954	Re: Dynatech MuscleMaxx Headers Just bought the 70-81 Camaro 1 3/4 to 1 7/8 step to 3" from Jegs. __________________ http://67-72chevytrucks.com/vboard/s...54#post3194654



Register or Log In To remove these advertisements.

03-12-2011, 10:56 PM	#42
shrunken66stroker Registered User Join Date: Jan 2008 Location: Las Vegas, Nv Posts: 954	Re: Dynatech MuscleMaxx Headers 329-740-29310 is what it says on the invoice. I'll post pics when they get here. They're supposed to arrive on Friday. __________________ http://67-72chevytrucks.com/vboard/s...54#post3194654

03-13-2011, 12:37 AM	#43
softballnrd27 Always a work in progress Join Date: Jun 2007 Location: Harker Heights, TX Posts: 1,599	Re: Dynatech MuscleMaxx Headers That part number says they are for a small block chevy __________________ USMC Retired Never trust a man who can't laugh at his own fart! 2010 Silverado Crew Cab 73 SWB 5.3/4l80e Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=695168

03-13-2011, 02:13 AM	#44
shrunken66stroker Registered User Join Date: Jan 2008 Location: Las Vegas, Nv Posts: 954	Re: Dynatech MuscleMaxx Headers You're right. I just called FedEx and had them turn the shipment around to Jegs. softballnrd27, I owe you a beer. You probably just saved me 40-50 bucks in shipping that I would have had to pay if they had gotten all the way to my house. Thank You! __________________ http://67-72chevytrucks.com/vboard/s...54#post3194654

03-13-2011, 03:55 AM	#45
softballnrd27 Always a work in progress Join Date: Jun 2007 Location: Harker Heights, TX Posts: 1,599	Re: Dynatech MuscleMaxx Headers Not a problem, I was going to get the steps too but when I looked at the part number it was SBC not LS. I have only been able to fnd the 67-69 part number but I don't know if they will fit or not. Good thing is that I have 6 months to wait. __________________ USMC Retired Never trust a man who can't laugh at his own fart! 2010 Silverado Crew Cab 73 SWB 5.3/4l80e Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=695168

03-13-2011, 01:48 PM	#46
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: Dynatech MuscleMaxx Headers several stepped ones are available for a sbc. Dynatech's available LSx headers are not stepped, and not painted...they come coated only, and for $399. Dynatech's SuperMaxx series for new/newish factory LSx powered cars is also available but they start at like $859! Part#'s from the Dynatech 2001 catalog for '70-'81 Camaro are: 1 7/8" x 3" LSx coated header- #715-29410 w/3" reducers 1 7/8" x 3" LSx coated header - #715-19410 w/2.5" reducers Part#'s from the Dynatech 2001 catalog for '67-'69 Camaro are: 1 7/8" x 3" LSx coated header- #715-21410 w/3" reducers 1 7/8" x 3" LSx coated header - #715-11410 w/2.5" reducers Part#'s from the Dynatech 2001 catalog for '68-'74 Nova (same as 1st gen Camaro?)are: 1 7/8" x 3" LSx coated header- #715-21410 w/3" reducers 1 7/8" x 3" LSx coated header - #715-11410 w/2.5" reducers __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

03-14-2011, 12:40 AM	#47
shrunken66stroker Registered User Join Date: Jan 2008 Location: Las Vegas, Nv Posts: 954	Re: Dynatech MuscleMaxx Headers The problem is that Speedway Motors is out of the 70-81 Camaro swap headers and the only other place I can find them is Jegs for $719. Do you know of anywhere else that has them for $399? __________________ http://67-72chevytrucks.com/vboard/s...54#post3194654

03-31-2011, 11:01 PM	#48
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: Dynatech MuscleMaxx Headers Summit sells them for $399 and lists a 4/13 ship date if bought today. http://www.summitracing.com/dynatech __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

09-06-2011, 09:47 PM	#49
BigShoe24 True Addiction Join Date: Nov 2005 Location: FTL Posts: 415	Re: Dynatech MuscleMaxx Headers Any idea of the length of the black line? Thanks Attached Images __________________ RCC

09-09-2011, 11:33 PM	#50
85burb Registered User Join Date: Dec 2009 Location: lindale,tx Posts: 2,373	Re: Dynatech MuscleMaxx Headers Do you have your body on yet? Was wondering if they cleared the shifter linkage. __________________ 82 c10 5.3/4l60 84 c20 5.3/sm465 85 chevy k10 suburban LQ4/4l60 91 chevy c10 suburban Lsa 5.3/4l60 2017 Silverado whipple 5.3 1964 Vw beetle 1974 vw beetle

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.