'72 C/10 Custom Cruiser Project - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Cameron 1137 · 05-29-2011, 04:46 PM

Finally got around to painting that bumper, it looks good for the time being. i also asked my mom if she could take some steel wool to my center caps and polish my trim rings, she started on the center caps, and the look like brand new!

Oh, and i went to prom too....

Cameron 1137 · 06-17-2011, 05:09 PM

Not much of an update, but one none the less
I decided to se if i could g bring some life back to that old paint. it came out pretty good, but its a good thing that i don't like shiny paint because im going to be tearing into it.

I also painted the rallies! They look great, not quite the grey i was going for but i still think they look great

Up in the Air

And... with the shiny trim rings and center caps! THANKS MOM!!

Cameron 1137 · 06-17-2011, 06:14 PM

Couple other things

Got a cup holder for the truck. its out of a 98 f**d taurus.
ahhh! f**d parts in a chevy!

I also got some speakers to put in too.. my step grandfather is a carpenter so he is making me some speaker boxes, just got to get a a better radio

Possibly this one

and a good friend of mine generously donated a ton of air ride parts to the truck... one step closer to LOW!

And a box for my flamethrower exhaust

Cameron 1137 · 06-17-2011, 09:44 PM

I need you guy's expert advice. im looking for a a set of cheap headers. can anyone recommend a set that will clear the frame rails? the cheaper the better, they dont have to be chrome

another thing, i know a guy that has some parts. he has 2 repro 68 fenders, a hood, core support, inner fender wells, doors; new and repro, rockers and a cowl. should i get the 68 stuff and convert my front clip? the front grill metal is expensive and so is the trim, and if not will the inner fender wells and rockers work on my 72, were they the same? i know the doors will work

rob32472 · 06-17-2011, 09:56 PM

Inner fenders and rockers will work just fine. Good luck with your build

jb1016 · 06-22-2011, 10:31 PM

Nice build, love that hugger orange!! Keep up the good work.

**oldman3** · 06-27-2011, 02:42 PM

Hey Cam, came across this pic in my files and wanted to sent it to you, since you asked about the steering wheel.....Jim

Cameron 1137 · 06-27-2011, 03:21 PM

Very nice! I like it!, and i like how you wrapped it in the leather to match

Cameron 1137 · 06-27-2011, 04:00 PM

Quote:

Originally Posted by rob32472

Inner fenders and rockers will work just fine. Good luck with your build

Quote:

Originally Posted by jb1016

Nice build, love that hugger orange!! Keep up the good work.

Thanks Guys!

Small update but it was huge for me. i got my gas gauge working. had to do some custom wiring but it works!

I also went to a small show yesterday

This truck won best 4X4

Cameron 1137 · 07-09-2011, 10:32 PM

Update time.

Exhaust is the star of this one.

removed the old:

got some cheap headers wednesday, test fitted them, painted and installed them.

Then she went to the muffler shop to have some pipes put on. i had already bought the flowmaster 40s so they put in pipe form the collectors to the flows.

so as of right now the flows dump just before the rear axle because i'm swapping out the step bumper for a sport bumper and it will sit higher than the step, so once i receive the bumper ill bring her back to the muffler shop.

Heres a vid of what she sounds like now. (much louder in person.)

YouTube - ‪Exhaust 1/2...

Cameron 1137 · 07-09-2011, 10:38 PM

I also wired up my gauges, with the help of my dad

this is the steering wheel i put in

Gotta paint it black!

**oldman3** · 07-10-2011, 12:25 AM

Hey Cam, moving right along, truck sounds great. Keep changing and posting.....Jim

4matty3 · 07-10-2011, 12:44 AM

love it.. good to see another young guy too. got the same setup as u also. keep it up!

Cameron 1137 · 07-10-2011, 11:56 AM

Quote:

Originally Posted by oldman3

Hey Cam, moving right along, truck sounds great. Keep changing and posting.....Jim

Thanks Jim.

Quote:

Originally Posted by 4matty3

love it.. good to see another young guy too. got the same setup as u also. keep it up!

Thanks. you look like you have a good project yourself!

The bumper should be here tomorrow (if the men in brown don't screw up).
ill get it mounted and hopefully i can get the exhaust finished up tuesday or wednesday.

Cameron 1137 · 07-27-2011, 10:11 PM

Finally tore into the old orange paint! did some body work and prepped the pass. side bed side for primer.

This is where i stopped because i ran out of light. ill be shooting some primer in the morning.

i also got the sport pumper on and the tail pipes run. Pictures of those tomorrow.

lowdown72 · 07-27-2011, 10:18 PM

trucks lookin great keep it up

Cameron 1137 · 07-28-2011, 05:03 PM

I got up early today and finished sanding the bed. Cleaned it up and shot the primer. I still have more work to do on this side. some dents and imperfections but now i can clearly see them

I could have never done all this my self, this is my first time after all. i had a couple buddies of mine who have done this many times before. Thanks Tom and Denny!

I also got the shots of the bumper and Tailpipes. i think they came out great. Now i have to get a set of chrome tips.

**oldman3** · 07-29-2011, 04:50 PM

Cam, computors been in shop for couple days, haven't posted. Looks good, keep at it....Jim

Cameron 1137 · 07-29-2011, 05:10 PM

Quote:

Originally Posted by lowdown72

trucks lookin great keep it up

Quote:

Originally Posted by oldman3

Cam, computors been in shop for couple days, haven't posted. Looks good, keep at it....Jim

Thanks Guys.

RCbowtie69 · 07-30-2011, 10:31 AM

Looking good,you have made some headway on your project & it sounds great with flow master on it,keep the pictures coming & Keep on Truckin'

weaintscared · 07-30-2011, 10:40 AM

looks good takes lots of work!!!

heres my build
http://67-72chevytrucks.com/vboard/s...d.php?t=468622

Cameron 1137 · 07-30-2011, 11:46 AM

Quote:

Originally Posted by RCbowtie69

Looking good,you have made some headway on your project & it sounds great with flow master on it,keep the pictures coming & Keep on Truckin'

Thanks. Having one side in one color really motivates me to do more work and get this thing done!

Quote:

Originally Posted by weaintscared

looks good takes lots of work!!!

heres my build
http://67-72chevytrucks.com/vboard/s...d.php?t=468622

Thanks, Checking out your build now......

50bomb · 08-05-2011, 11:47 AM

Truck looks real sweet. Can not wait to see the airbags on it.

72SWBChevy · 08-05-2011, 12:46 PM

Welcome....Looking good, keep it up!!!

Cameron 1137 · 08-06-2011, 08:37 AM

Quote:

Originally Posted by 50bomb

Truck looks real sweet. Can not wait to see the airbags on it.

Thanks, the air bags will probably be a future project, and it doesn't look like it will be in the near future

Quote:

Originally Posted by 72SWBChevy

Welcome....Looking good, keep it up!!!

Thanks!

05-29-2011, 04:46 PM	#26
Cameron 1137 Registered User Join Date: Feb 2011 Location: Pittsfield, Ma Posts: 497	Re: '72 C/10 Custom Cruiser Project Finally got around to painting that bumper, it looks good for the time being. i also asked my mom if she could take some steel wool to my center caps and polish my trim rings, she started on the center caps, and the look like brand new! Oh, and i went to prom too.... __________________ Cam 1972 Chevy C/10 "Custom Cruiser Project" Build Thread 1961 Olds Super 88 (Daily) 1966 Chevy Corvair 500, "Marigold" SOLD 2005 Subaru Outback Wagon DEAD 2008 Pontiac G8, New Winter/Daily

06-17-2011, 05:09 PM	#27
Cameron 1137 Registered User Join Date: Feb 2011 Location: Pittsfield, Ma Posts: 497	Re: '72 C/10 Custom Cruiser Project Not much of an update, but one none the less I decided to se if i could g bring some life back to that old paint. it came out pretty good, but its a good thing that i don't like shiny paint because im going to be tearing into it. I also painted the rallies! They look great, not quite the grey i was going for but i still think they look great Up in the Air And... with the shiny trim rings and center caps! THANKS MOM!! __________________ Cam 1972 Chevy C/10 "Custom Cruiser Project" Build Thread 1961 Olds Super 88 (Daily) 1966 Chevy Corvair 500, "Marigold" SOLD 2005 Subaru Outback Wagon DEAD 2008 Pontiac G8, New Winter/Daily

06-17-2011, 06:14 PM	#28
Cameron 1137 Registered User Join Date: Feb 2011 Location: Pittsfield, Ma Posts: 497	Re: '72 C/10 Custom Cruiser Project Couple other things Got a cup holder for the truck. its out of a 98 fd taurus. ahhh! fd parts in a chevy! I also got some speakers to put in too.. my step grandfather is a carpenter so he is making me some speaker boxes, just got to get a a better radio Possibly this one and a good friend of mine generously donated a ton of air ride parts to the truck... one step closer to LOW! And a box for my flamethrower exhaust __________________ Cam 1972 Chevy C/10 "Custom Cruiser Project" Build Thread 1961 Olds Super 88 (Daily) 1966 Chevy Corvair 500, "Marigold" SOLD 2005 Subaru Outback Wagon DEAD 2008 Pontiac G8, New Winter/Daily

06-17-2011, 09:44 PM	#29
Cameron 1137 Registered User Join Date: Feb 2011 Location: Pittsfield, Ma Posts: 497	Re: '72 C/10 Custom Cruiser Project I need you guy's expert advice. im looking for a a set of cheap headers. can anyone recommend a set that will clear the frame rails? the cheaper the better, they dont have to be chrome another thing, i know a guy that has some parts. he has 2 repro 68 fenders, a hood, core support, inner fender wells, doors; new and repro, rockers and a cowl. should i get the 68 stuff and convert my front clip? the front grill metal is expensive and so is the trim, and if not will the inner fender wells and rockers work on my 72, were they the same? i know the doors will work __________________ Cam 1972 Chevy C/10 "Custom Cruiser Project" Build Thread 1961 Olds Super 88 (Daily) 1966 Chevy Corvair 500, "Marigold" SOLD 2005 Subaru Outback Wagon DEAD 2008 Pontiac G8, New Winter/Daily

06-17-2011, 09:56 PM	#30
rob32472 Registered User Join Date: May 2007 Location: dallas ga Posts: 1,505	Re: '72 C/10 Custom Cruiser Project Inner fenders and rockers will work just fine. Good luck with your build

06-27-2011, 02:42 PM	#32
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: '72 C/10 Custom Cruiser Project Hey Cam, came across this pic in my files and wanted to sent it to you, since you asked about the steering wheel.....Jim Attached Images __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br /> Last edited by oldman3; 06-27-2011 at 02:42 PM.

06-27-2011, 03:21 PM	#33
Cameron 1137 Registered User Join Date: Feb 2011 Location: Pittsfield, Ma Posts: 497	Re: '72 C/10 Custom Cruiser Project Very nice! I like it!, and i like how you wrapped it in the leather to match __________________ Cam 1972 Chevy C/10 "Custom Cruiser Project" Build Thread 1961 Olds Super 88 (Daily) 1966 Chevy Corvair 500, "Marigold" SOLD 2005 Subaru Outback Wagon DEAD 2008 Pontiac G8, New Winter/Daily

07-09-2011, 10:38 PM	#36
Cameron 1137 Registered User Join Date: Feb 2011 Location: Pittsfield, Ma Posts: 497	Re: '72 C/10 Custom Cruiser Project I also wired up my gauges, with the help of my dad this is the steering wheel i put in Gotta paint it black! __________________ Cam 1972 Chevy C/10 "Custom Cruiser Project" Build Thread 1961 Olds Super 88 (Daily) 1966 Chevy Corvair 500, "Marigold" SOLD 2005 Subaru Outback Wagon DEAD 2008 Pontiac G8, New Winter/Daily

07-10-2011, 12:25 AM	#37
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: '72 C/10 Custom Cruiser Project Hey Cam, moving right along, truck sounds great. Keep changing and posting.....Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

07-10-2011, 12:44 AM	#38
4matty3 Registered User Join Date: Mar 2011 Location: pittsburgh Posts: 39	Re: '72 C/10 Custom Cruiser Project love it.. good to see another young guy too. got the same setup as u also. keep it up! __________________ 1971 c10

07-27-2011, 10:11 PM	#40
Cameron 1137 Registered User Join Date: Feb 2011 Location: Pittsfield, Ma Posts: 497	Re: '72 C/10 Custom Cruiser Project Finally tore into the old orange paint! did some body work and prepped the pass. side bed side for primer. This is where i stopped because i ran out of light. ill be shooting some primer in the morning. i also got the sport pumper on and the tail pipes run. Pictures of those tomorrow. __________________ Cam 1972 Chevy C/10 "Custom Cruiser Project" Build Thread 1961 Olds Super 88 (Daily) 1966 Chevy Corvair 500, "Marigold" SOLD 2005 Subaru Outback Wagon DEAD 2008 Pontiac G8, New Winter/Daily

07-27-2011, 10:18 PM	#41
lowdown72 Registered User Join Date: Feb 2011 Location: mcminnville tn Posts: 317	Re: '72 C/10 Custom Cruiser Project trucks lookin great keep it up __________________ 72 c-10 67 clipped 327 th400

07-28-2011, 05:03 PM	#42
Cameron 1137 Registered User Join Date: Feb 2011 Location: Pittsfield, Ma Posts: 497	Re: '72 C/10 Custom Cruiser Project I got up early today and finished sanding the bed. Cleaned it up and shot the primer. I still have more work to do on this side. some dents and imperfections but now i can clearly see them I could have never done all this my self, this is my first time after all. i had a couple buddies of mine who have done this many times before. Thanks Tom and Denny! I also got the shots of the bumper and Tailpipes. i think they came out great. Now i have to get a set of chrome tips. __________________ Cam 1972 Chevy C/10 "Custom Cruiser Project" Build Thread 1961 Olds Super 88 (Daily) 1966 Chevy Corvair 500, "Marigold" SOLD 2005 Subaru Outback Wagon DEAD 2008 Pontiac G8, New Winter/Daily

07-29-2011, 04:50 PM	#43
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: '72 C/10 Custom Cruiser Project Cam, computors been in shop for couple days, haven't posted. Looks good, keep at it....Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

07-30-2011, 10:31 AM	#45
RCbowtie69 Registered User Join Date: Dec 2003 Location: Thomasville, NC Posts: 1,877	Re: '72 C/10 Custom Cruiser Project Looking good,you have made some headway on your project & it sounds great with flow master on it,keep the pictures coming & Keep on Truckin' __________________ My Truck: 2.5 drop front, 4 & 5/8 in rear, 350cubic in. been bored .60 over, 700r4 (soon), 3 speed (on tree for now).rims & tires size,15x8 ralleys 5 on 5,P275/60R15. Members I have met: Pickupman, 1972 Super Cheyenne, Stepside,Chis Mc Bride. tsnow67,joel.e,



Register or Log In To remove these advertisements.

07-30-2011, 10:40 AM	#46
weaintscared Registered User Join Date: Mar 2011 Location: Sumter SC Posts: 439	Re: '72 C/10 Custom Cruiser Project looks good takes lots of work!!! heres my build http://67-72chevytrucks.com/vboard/s...d.php?t=468622

08-05-2011, 11:47 AM	#48
50bomb Registered User Join Date: Jul 2010 Location: Hemet,Ca Posts: 1,502	Re: '72 C/10 Custom Cruiser Project Truck looks real sweet. Can not wait to see the airbags on it.

08-05-2011, 12:46 PM	#49
72SWBChevy Registered User Join Date: Jun 2004 Location: Houston Tx Posts: 753	Re: '72 C/10 Custom Cruiser Project Welcome....Looking good, keep it up!!! __________________ 1977 Camaro 468 BBC - SOLD - 1972 Chevy SWB....in the works!! 2006 Crew Cab Dmax/Allison Summit White-SOLD- 2009 Toyota Tacoma V6 Pre Runner - daily driver - my build thread -http://67-72chevytrucks.com/vboard/s...95#post4774595

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.