MN Parting 68 GMC - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

heeroyue2002 · 04-13-2011, 03:39 PM

i'll pass on the steering wheel atm, thanks!

luckyss · 04-13-2011, 07:49 PM

How much for the ebrake set up under the dash? All parts needed up to the column. I have a stripped cab and need it. Let me know shipped to nj
Posted via Mobile Device

**too much stuff** · 04-13-2011, 10:36 PM

Shipping prices PMd to those interested.
Jud, the apron looks good. $30 plus shipping.
Leroy, i will let you know if the first guy backs out.
hector, front bumper isn't much good. It is useable, but that is it.
heeroyue, no problem.
luckyss, are you looking for the in cab parts? It is pretty rusty underneath. The inside parts may be fine yet. I will look tomorrow.

Let me know if i missed anyone. Eric

luckyss · 04-14-2011, 12:25 AM

Not too worried about rust at this point just need a starting point i have nothing now...as long as it is usable
let me know...
Zip code for shipping is 07753
Posted via Mobile Device

**too much stuff** · 04-14-2011, 01:09 PM

Luckyss, i can't get the cable to move at all. If you are interested in the handle and mounting brackets it would be $20 plus shipping. I will guess shipping around $10-$15 for parcel post. Let me know either way.

luckyss · 04-14-2011, 02:31 PM

Works for me, not interested in the cable, i need the handle and brackets

**too much stuff** · 04-14-2011, 07:24 PM

Going to the crusher tomorrow... (friday)

Vintage Windmills · 04-14-2011, 07:38 PM

Eric, I guess I already own a rock guard in kansas lol so I will pass on that one. I'll paypal you for just the horn button shortly.

Jud

**too much stuff** · 04-14-2011, 10:55 PM

Door panels, vents and horn button all sold.
Hei and upper grill bar and e-brake handle pending...

**Tmend** · 04-14-2011, 10:56 PM

How much for the hole clutch setup? Starting from where it bolts to the engine all the way to the pedal. Except the pedal
Posted via Mobile Device

**too much stuff** · 04-14-2011, 10:59 PM

Quote:

Originally Posted by Tmend

How much for the hole clutch setup? Starting from where it bolts to the engine all the way to the pedal. Except the pedal
Posted via Mobile Device

Are you talking basically the rods and z-bar?

**Tmend** · 04-14-2011, 11:03 PM

Yes sir also the bearings the go through the upper steering volume support
Posted via Mobile Device

vasquezmrysvll · 04-14-2011, 11:04 PM

rear sport bumper brackets?

**too much stuff** · 04-14-2011, 11:23 PM

Tmend, i am not sure what is involved in pulling all of that around the column. I can try to pull that stuff in the morning if i get time. $30 plus shipping sound fair? The truck is leaving around 10 am...
vasquez, it does have a sport bumper, but i think everything is tweaked in the back. I can double check in the AM.
Eric

**Tmend** · 04-14-2011, 11:27 PM

30 sounds fair. If you pull the piece I'm talking about ill make it 40 plus shipping. Iether way it's a go. Let me now 2maro what it will be. Thanks
Posted via Mobile Device

vasquezmrysvll · 04-14-2011, 11:29 PM

if the brackets are usable, id like a price shipped to 95961. thanks -art ...O....it is a coil spring truck, right?

**too much stuff** · 04-14-2011, 11:32 PM

Quote:

Originally Posted by Tmend

30 sounds fair. If you pull the piece I'm talking about ill make it 40 plus shipping. Iether way it's a go. Let me now 2maro what it will be. Thanks
Posted via Mobile Device

I will try in the am, but can't promise it. I will let you know.

vasquez, it is a leaf spring truck.

vasquezmrysvll · 04-14-2011, 11:36 PM

is there a difference in brackets?

**too much stuff** · 04-14-2011, 11:45 PM

Quote:

Originally Posted by vasquezmrysvll

is there a difference in brackets?

I don't think so on a 2wd long bed, but not positive.

**Tmend** · 04-15-2011, 12:00 AM

Thanks
Posted via Mobile Device

gearhead1985 · 04-15-2011, 12:18 AM

how much for the door guts i want every thing latches, window regulators, handles, cranks, lock buttons, both doors all of it but the exterior handles, glass, and lock cylinders

**too much stuff** · 04-15-2011, 12:37 AM

Gearhead, probably looking at $60 plus shipping. I will be pulling a few parts in the am before it goes to the crusher.

gearhead1985 · 04-15-2011, 03:14 PM

works for me i will do 60 plus shipping

**too much stuff** · 04-15-2011, 06:54 PM

vasquez, they were rough so i didn't pull them.

tmend and gearhead, i will post pics later tonight of what i pulled.

THIS TRUCK IS GONE...

**too much stuff** · 04-16-2011, 12:34 PM

Pics...
luckyss, i didn't have a chance to grab the strap, but have these. $33 shipped.
tmend, this is what i had time to grab. Let me know if you can use it.
gearhead, looks like shipping is about $20. If you want the catches that bolt to the cab, add $20. Thanks and let me know on this stuff.
Eric

04-13-2011, 03:39 PM	#26
heeroyue2002 fat old dude Join Date: Feb 2010 Location: fresno, california Posts: 1,424	Re: Parting 68 GMC i'll pass on the steering wheel atm, thanks! __________________ 1972 c-10 shortbed 350/400 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=389157 1968 workhorse http://67-72chevytrucks.com/vboard/s...d.php?t=446216 Accepting part donations

04-13-2011, 07:49 PM	#27
luckyss Registered User Join Date: Nov 2003 Location: Jersey Posts: 123	Re: Parting 68 GMC How much for the ebrake set up under the dash? All parts needed up to the column. I have a stripped cab and need it. Let me know shipped to nj Posted via Mobile Device

04-13-2011, 10:36 PM	#28
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: Parting 68 GMC Shipping prices PMd to those interested. Jud, the apron looks good. $30 plus shipping. Leroy, i will let you know if the first guy backs out. hector, front bumper isn't much good. It is useable, but that is it. heeroyue, no problem. luckyss, are you looking for the in cab parts? It is pretty rusty underneath. The inside parts may be fine yet. I will look tomorrow. Let me know if i missed anyone. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

04-14-2011, 12:25 AM	#29
luckyss Registered User Join Date: Nov 2003 Location: Jersey Posts: 123	Re: Parting 68 GMC Not too worried about rust at this point just need a starting point i have nothing now...as long as it is usable let me know... Zip code for shipping is 07753 Posted via Mobile Device

04-14-2011, 01:09 PM	#30
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: Parting 68 GMC Luckyss, i can't get the cable to move at all. If you are interested in the handle and mounting brackets it would be $20 plus shipping. I will guess shipping around $10-$15 for parcel post. Let me know either way. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

04-14-2011, 02:31 PM	#31
luckyss Registered User Join Date: Nov 2003 Location: Jersey Posts: 123	Re: Parting 68 GMC Works for me, not interested in the cable, i need the handle and brackets

04-14-2011, 07:24 PM	#32
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: Parting 68 GMC Going to the crusher tomorrow... (friday) __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

04-14-2011, 07:38 PM	#33
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Parting 68 GMC Eric, I guess I already own a rock guard in kansas lol so I will pass on that one. I'll paypal you for just the horn button shortly. Jud __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

04-14-2011, 10:55 PM	#34
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: Parting 68 GMC Door panels, vents and horn button all sold. Hei and upper grill bar and e-brake handle pending... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

04-14-2011, 10:56 PM	#35
Tmend Senior Member Join Date: Nov 2010 Location: Reseda CA Posts: 1,307	Re: Parting 68 GMC How much for the hole clutch setup? Starting from where it bolts to the engine all the way to the pedal. Except the pedal Posted via Mobile Device

04-14-2011, 11:03 PM	#37
Tmend Senior Member Join Date: Nov 2010 Location: Reseda CA Posts: 1,307	Re: Parting 68 GMC Yes sir also the bearings the go through the upper steering volume support Posted via Mobile Device

04-14-2011, 11:04 PM	#38
vasquezmrysvll "the other guy" Join Date: Oct 2008 Location: Olivehurst California 95961 Posts: 901	Re: Parting 68 GMC rear sport bumper brackets? __________________ God Said,"Building A 10 Second Import Is Like Coming Out Of The Closet, In The End Ur Still....."EXPLETIVE"

04-14-2011, 11:23 PM	#39
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: Parting 68 GMC Tmend, i am not sure what is involved in pulling all of that around the column. I can try to pull that stuff in the morning if i get time. $30 plus shipping sound fair? The truck is leaving around 10 am... vasquez, it does have a sport bumper, but i think everything is tweaked in the back. I can double check in the AM. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

04-14-2011, 11:27 PM	#40
Tmend Senior Member Join Date: Nov 2010 Location: Reseda CA Posts: 1,307	Re: Parting 68 GMC 30 sounds fair. If you pull the piece I'm talking about ill make it 40 plus shipping. Iether way it's a go. Let me now 2maro what it will be. Thanks Posted via Mobile Device

04-14-2011, 11:29 PM	#41
vasquezmrysvll "the other guy" Join Date: Oct 2008 Location: Olivehurst California 95961 Posts: 901	Re: Parting 68 GMC if the brackets are usable, id like a price shipped to 95961. thanks -art ...O....it is a coil spring truck, right? __________________ God Said,"Building A 10 Second Import Is Like Coming Out Of The Closet, In The End Ur Still....."EXPLETIVE"



Register or Log In To remove these advertisements.

04-14-2011, 11:36 PM	#43
vasquezmrysvll "the other guy" Join Date: Oct 2008 Location: Olivehurst California 95961 Posts: 901	Re: Parting 68 GMC is there a difference in brackets? __________________ God Said,"Building A 10 Second Import Is Like Coming Out Of The Closet, In The End Ur Still....."EXPLETIVE"

04-15-2011, 12:00 AM	#45
Tmend Senior Member Join Date: Nov 2010 Location: Reseda CA Posts: 1,307	Re: Parting 68 GMC Thanks Posted via Mobile Device

04-15-2011, 12:18 AM	#46
gearhead1985 Registered User Join Date: Apr 2011 Location: quincy il Posts: 29	Re: Parting 68 GMC how much for the door guts i want every thing latches, window regulators, handles, cranks, lock buttons, both doors all of it but the exterior handles, glass, and lock cylinders

04-15-2011, 12:37 AM	#47
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: Parting 68 GMC Gearhead, probably looking at $60 plus shipping. I will be pulling a few parts in the am before it goes to the crusher. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

04-15-2011, 03:14 PM	#48
gearhead1985 Registered User Join Date: Apr 2011 Location: quincy il Posts: 29	Re: Parting 68 GMC works for me i will do 60 plus shipping

04-15-2011, 06:54 PM	#49
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: Parting 68 GMC vasquez, they were rough so i didn't pull them. tmend and gearhead, i will post pics later tonight of what i pulled. THIS TRUCK IS GONE... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

04-16-2011, 12:34 PM	#50
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: Parting 68 GMC Pics... luckyss, i didn't have a chance to grab the strap, but have these. $33 shipped. tmend, this is what i had time to grab. Let me know if you can use it. gearhead, looks like shipping is about $20. If you want the catches that bolt to the cab, add $20. Thanks and let me know on this stuff. Eric Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.