would you guys be intrested in... - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dmartin1 · 10-18-2011, 12:46 AM

or powder too.haha

Gordonr1973 · 10-18-2011, 02:21 AM

Quote:

Originally Posted by INSIDIOUS '86

some teaser pics of the prototype valvecover studs. whan I have a full set I will post pics on engine

these will come with the base aluminum or painted with vht in colors of choice and the bullets clearcoated for longevity of thier shine

I'd be VERY interested in these for manual door lock 'pull-up' things (you know the knob-things near the rear part of the door windows.)

Bullet size would need to be relatively moderate, like a 30-30 shell.

Please PM me if possible!!

jrcaprai · 10-18-2011, 05:46 PM

I would be interested in #1

INSIDIOUS '86 · 10-18-2011, 10:16 PM

Quote:

Originally Posted by dmartin1

i hope those bullets dont still have the primers in them.
loaded bullet+primer+ on 200 degree engine =

primer caps are cut off so no worrys lol, and they will be made out of blank rounds

and this is the first time ive mentioned pillar pods

dmartin1 · 10-18-2011, 11:40 PM

Quote:

Originally Posted by INSIDIOUS '86

primer caps are cut off so no worrys lol, and they will be made out of blank rounds

and this is the first time ive mentioned pillar pods

haha right on.

Ill be interested in a set of these for door lock knobs as well.Like mentioned above, a smaller shell.

INSIDIOUS '86 · 10-19-2011, 02:42 PM

Quote:

Originally Posted by Gordonr1973

I'd be VERY interested in these for manual door lock 'pull-up' things (you know the knob-things near the rear part of the door windows.)

Bullet size would need to be relatively moderate, like a 30-30 shell.

Please PM me if possible!!

I will show pics of these soon i do believe the prototypes are 30-30s but i can also make the brass shell shorter or longer

hipasschev94 · 10-19-2011, 06:09 PM

what about a custom gauge cluster to look like a 81 camaro made to bolt up to the original place in the second gen c-k10's?

INSIDIOUS '86 · 10-19-2011, 09:23 PM

Quote:

Originally Posted by hipasschev94

what about a custom gauge cluster to look like a 81 camaro made to bolt up to the original place in the second gen c-k10's?

the problem with that is the gauges are a diffrent size and bolt on diffrently not to mention alot harder to find.

hipasschev94 · 10-19-2011, 09:27 PM

well what i ment was what about designing a gauge cluster that would be shaped like and bolt on like the original but the styling and positioning of the cluster would resemble a camaro

INSIDIOUS '86 · 10-19-2011, 09:34 PM

Quote:

Originally Posted by hipasschev94

well what i ment was what about designing a gauge cluster that would be shaped like and bolt on like the original but the styling and positioning of the cluster would resemble a camaro

well that woud require a custom gauge bezel requiring advance vacuum-forming tools that i dont have and such

hipasschev94 · 10-19-2011, 09:38 PM

Quote:

Originally Posted by INSIDIOUS '86

well that woud require a custom gauge bezel requiring advance vacuum-forming tools that i dont have and such

yeah i geuss that would be a bump in the road lol

INSIDIOUS '86 · 10-19-2011, 09:59 PM

door locks, one wuth valve reliefs the other has them omitted which do you guys like better?

Gordonr1973 · 01-01-2012, 08:03 PM

any updates on these??

77chevyinline6 · 01-01-2012, 08:09 PM

im drooling over those gauges.....

cfan10 · 01-01-2012, 08:49 PM

Quote:

Originally Posted by INSIDIOUS '86

some teaser pics of the prototype valvecover studs. whan I have a full set I will post pics on engine

these will come with the base aluminum or painted with vht in colors of choice and the bullets clearcoated for longevity of thier shine

This I want, good job.
Posted via Mobile Device

Desert1957 · 01-01-2012, 09:28 PM

I'm in on the "IROC" tach / gas gauge conversion for 2 of my trucks

Desert

one low c10 · 01-01-2012, 09:44 PM

I would like a set of the piston lock rod covers with the valve reliefs. how much?

INSIDIOUS '86 · 01-01-2012, 10:50 PM

Valve studs with pistons? Those are in the works and no pricing available yet. But don't worry just a few more months and stuff will be coming
Posted via Mobile Device

one low c10 · 01-01-2012, 10:55 PM

Not the valve cover studs but the door lock knobs that look like pistons with the 4 valve reliefs in them. Just like the 2nd pic
Posted via Mobile Device

INSIDIOUS '86 · 01-01-2012, 11:15 PM

I get yah. Yah those are looking to be about $15 dollars with valve reliefs and ten with flat tops
Posted via Mobile Device

Heartkill · 01-01-2012, 11:39 PM

Quote:

Originally Posted by 77chevyinline6

im drooling over those gauges.....

Same here, those look killer!

Devillusion · 01-02-2012, 01:53 AM

very interesting

one low c10 · 01-02-2012, 07:22 AM

I'll buy a set off you when you get them done, take paypal?
Posted via Mobile Device

okieraptor · 01-02-2012, 10:19 AM

I would be inferested in the gauges. Prolly a couple sets of the locks with the vavle reliefs cut out too. If i keep one truck old late model motor might pick up a set of vavle cover bolts.
Posted via Mobile Device

INSIDIOUS '86 · 01-02-2012, 04:25 PM

Quote:

Originally Posted by one low c10

I'll buy a set off you when you get them done, take paypal?
Posted via Mobile Device

I will most likely do a PayPal account to handle my orders
Posted via Mobile Device

10-18-2011, 12:46 AM	#26
dmartin1 Registered User Join Date: Aug 2008 Location: mohave valley,arizona Posts: 1,088	Re: would you guys be intrested in... or powder too.haha __________________ 1969 Shortbed in progress 1982 short step, few suspension and motor upgrades.getting a 468 1978 Shortbed fleet side bonanza fully loaded 1978 k20 Silverado loaded.currently engine-less 1989 k10 suburban 9" lift 65 nova And more

10-18-2011, 05:46 PM	#28
jrcaprai Registered User Join Date: May 2008 Location: Salt Lake City Posts: 365	Re: would you guys be intrested in... I would be interested in #1

10-19-2011, 06:09 PM	#32
hipasschev94 Registered User Join Date: Oct 2011 Location: ramsey minnesota Posts: 217	Re: would you guys be intrested in... what about a custom gauge cluster to look like a 81 camaro made to bolt up to the original place in the second gen c-k10's? __________________ <><JP><>

10-19-2011, 09:27 PM	#34
hipasschev94 Registered User Join Date: Oct 2011 Location: ramsey minnesota Posts: 217	Re: would you guys be intrested in... well what i ment was what about designing a gauge cluster that would be shaped like and bolt on like the original but the styling and positioning of the cluster would resemble a camaro __________________ <><JP><>

10-19-2011, 09:59 PM	#37
INSIDIOUS '86 Registered User Join Date: Jul 2009 Location: washington Posts: 4,178	Re: would you guys be intrested in... door locks, one wuth valve reliefs the other has them omitted which do you guys like better? Attached Images __________________ 377 sbc thumpr cam autogear m23 muncie 3:73 Detroit trutrac 3''spintech prostreet mufflers xpipe 1 3/4 headers build thread !http://67-72chevytrucks.com/vboard/s...d.php?t=577217 Iroc gauge threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=554511

01-01-2012, 08:03 PM	#38
Gordonr1973 Home Built '87 Join Date: May 2010 Location: Calgary, Alberta Canada Posts: 1,829	Re: would you guys be intrested in... any updates on these?? __________________ Gordon 1998 White Chev ext cab 2WD (Summer Project) http://67-72chevytrucks.com/vboard/s...d.php?t=408424 1987 Chev Silverado SWB (Winter Project Rebuild) http://67-72chevytrucks.com/vboard/s...d.php?t=424833 Truck Club http://67-72chevytrucks.com/vboard/s...d.php?t=466969

01-01-2012, 08:09 PM	#39
77chevyinline6 Registered User Join Date: Dec 2011 Location: mount airy NC Posts: 308	Re: would you guys be intrested in... im drooling over those gauges..... __________________ 77 c10 (went from a inline 6 to 350) (converted to 3 speed in the floor) 350: mild cam, holley 600cfm 4bbl, summit stage 1 intake, accel billet distributer, flowtech headers, 2 1/4" exhaust with glasspacks, powermaster 160a alternator.

01-01-2012, 09:28 PM	#41
Desert1957 Registered User Join Date: Apr 2009 Location: New Freedom Pa. Posts: 1,335	Re: would you guys be intrested in... I'm in on the "IROC" tach / gas gauge conversion for 2 of my trucks Desert

01-01-2012, 09:44 PM	#42
one low c10 Registered User Join Date: Sep 2010 Location: Toledo, Ohio Posts: 106	Re: would you guys be intrested in... I would like a set of the piston lock rod covers with the valve reliefs. how much?

01-01-2012, 10:50 PM	#43
INSIDIOUS '86 Registered User Join Date: Jul 2009 Location: washington Posts: 4,178	Re: would you guys be intrested in... Valve studs with pistons? Those are in the works and no pricing available yet. But don't worry just a few more months and stuff will be coming Posted via Mobile Device __________________ 377 sbc thumpr cam autogear m23 muncie 3:73 Detroit trutrac 3''spintech prostreet mufflers xpipe 1 3/4 headers build thread !http://67-72chevytrucks.com/vboard/s...d.php?t=577217 Iroc gauge threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=554511

01-01-2012, 10:55 PM	#44
one low c10 Registered User Join Date: Sep 2010 Location: Toledo, Ohio Posts: 106	Re: would you guys be intrested in... Not the valve cover studs but the door lock knobs that look like pistons with the 4 valve reliefs in them. Just like the 2nd pic Posted via Mobile Device

01-01-2012, 11:15 PM	#45
INSIDIOUS '86 Registered User Join Date: Jul 2009 Location: washington Posts: 4,178	Re: would you guys be intrested in... I get yah. Yah those are looking to be about $15 dollars with valve reliefs and ten with flat tops Posted via Mobile Device __________________ 377 sbc thumpr cam autogear m23 muncie 3:73 Detroit trutrac 3''spintech prostreet mufflers xpipe 1 3/4 headers build thread !http://67-72chevytrucks.com/vboard/s...d.php?t=577217 Iroc gauge threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=554511

01-02-2012, 01:53 AM	#47
Devillusion Registered User Join Date: Jan 2010 Location: Brandon, Manitoba, Canada Posts: 782	Re: would you guys be intrested in... very interesting __________________ 1967 K30 4x4/12v Cummins/getrag/D60/D70/355s 1967 GMC suburban 4x4/LS swap 5.3/4500/205/10 bolt/14 bolt full floater 1963 C10 reg cab long box 1970 Chevelle 1968 Biscayne 2dr post "...there is no excuse for what I am about to do, but dangit....it's gonna be fun!"

01-02-2012, 07:22 AM	#48
one low c10 Registered User Join Date: Sep 2010 Location: Toledo, Ohio Posts: 106	Re: would you guys be intrested in... I'll buy a set off you when you get them done, take paypal? Posted via Mobile Device

01-02-2012, 10:19 AM	#49
okieraptor Registered User Join Date: Mar 2010 Location: northern texas, southern oklahoma Posts: 144	Re: would you guys be intrested in... I would be inferested in the gauges. Prolly a couple sets of the locks with the vavle reliefs cut out too. If i keep one truck old late model motor might pick up a set of vavle cover bolts. Posted via Mobile Device __________________ 82 chevy longbed(grey truck)first truck when i was 15!



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.