IN Blasted and zinc phosphate parts - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HeavyMetalChevy · 11-02-2011, 08:07 PM

YEAH buddy!!! Sorry taking so long... I am getting decimated by shipping this week and still working out a way to Pickup my next truck Northwest Indy and ship out two Greyhound packs in the same trip... I was in no way putting your stuff out there for grabs... Just showing progress in my technique and eye for detail... Got to fine tune this new blaster and it should turn out pretty darn efficient!!!

jondancer · 11-02-2011, 08:38 PM

I have plenty of time, but I would like set. Keep me posted.
Thanks.
Posted via Mobile Device

HeavyMetalChevy · 11-11-2011, 12:56 AM

ttt

70-Shorty · 11-11-2011, 02:15 AM

Put me in line for a set of door hinges, striker plates (bolts & hardware), and an ash tray, let me know cost and ETA , did u ship the heater control?

Thanks, Tim
Posted via Mobile Device

HeavyMetalChevy · 11-11-2011, 07:44 PM

Everyone... My Pressure switch went out on my compressor today... Very hard to track down for Black Max 100 gallon...With a little luck found it but of course it had to be Friday!!! Will be receiving new switch mid week.. .Sorry for the delay and I will expedite and keep posted... Just glad I found one.. I have a smaller portable 100 psi tank I will see how it does... Thanks in advance for your patience.

Duane

70-Shorty · 11-11-2011, 08:37 PM

Quote:

Originally Posted by 70-Shorty

Put me in line for a set of door hinges, striker plates (bolts & hardware), and an ash tray, let me know cost and ETA , did u ship the heater control?

Thanks, Tim
Posted via Mobile Device

Duane, turns out my ash tray wasn't so bad...so don't sweat the ash tray.
I'll call you.
Tim

jondancer · 11-11-2011, 09:57 PM

I will be sending the money for the door hinges and tailgate hinges.
Thanks
Posted via Mobile Device

HeavyMetalChevy · 11-11-2011, 10:05 PM

Quote:

Originally Posted by jondancer

I will be sending the money for the door hinges and tailgate hinges.
Thanks
Posted via Mobile Device

Thanks jon... I love helping people... I think it shows in my honesty and no bs tactics I hope... I just pray people will return the favor showing me love on doors for my 70... I should have never sold them!!! lol..

HeavyMetalChevy · 11-18-2011, 07:49 PM

pic updates

HeavyMetalChevy · 11-18-2011, 07:52 PM

more honing in... FINALLY got pressure switch!!!!! Just a little to go here...

HeavyMetalChevy · 11-18-2011, 07:55 PM

core end supports flash rust must go!!! lol

HeavyMetalChevy · 11-18-2011, 07:59 PM

Quote:

Originally Posted by 70-Shorty

Duane, turns out my ash tray wasn't so bad...so don't sweat the ash tray.
I'll call you.
Tim

sorry about the heater.. how does $105 shipped sound on the door hinges and strikes... I pay ship

HeavyMetalChevy · 11-18-2011, 08:00 PM

Quote:

Originally Posted by jondancer

I will be sending the money for the door hinges and tailgate hinges.
Thanks
Posted via Mobile Device

Jon,,,received money order... Almost done thanks to pressure switch arrival!!!! Now I can make people happy!!!! man long week!!! I should be able to ship door hinges and tailgate hinges Monday buddy!!!! Thanks

HeavyMetalChevy · 11-22-2011, 01:19 AM

ttt

HeavyMetalChevy · 11-27-2011, 03:31 AM

ttt

HeavyMetalChevy · 12-03-2011, 03:25 PM

cowl....moo moo lol

HeavyMetalChevy · 12-03-2011, 06:14 PM

67 grille.. .Sorry...grille is a showcase of my work... I will be posting one as "for sale" A.S.A.P. My apologies..it was already spoken for before I blasted it..

**pops45** · 12-04-2011, 12:19 AM

How much for the grille shipped to 95816? I assume i will work on a 68????
Thanks

HeavyMetalChevy · 12-04-2011, 01:18 AM

Quote:

Originally Posted by pops45

How much for the grille shipped to 95816? I assume i will work on a 68????
Thanks

Sorry for the confusion... Did not mean to mislead... Was not listed because already spoken for just posting pics for work-piece portfolio. I am working on getting a bunch of 67-68 grilles.. I will def be in touch...When I post thread you will have first dibs!

**pops45** · 12-04-2011, 01:26 AM

OK no worries. LMK when you have one available.
Joe

LEX · 12-04-2011, 02:02 AM

Duane, these parts are clean. I'm eyeing the emergency brake assembly. I just took my dash apart and will see if mine is worth saving. I might snag that. I'll let ya know.
Posted via Mobile Device

HeavyMetalChevy · 12-04-2011, 12:49 PM

Quote:

Originally Posted by LEX

Duane, these parts are clean. I'm eyeing the emergency brake assembly. I just took my dash apart and will see if mine is worth saving. I might snag that. I'll let ya know.
Posted via Mobile Device

Hey man.. Thanks.. .Much appreciated.. I try to price them right as well.. Di you receive the cowl??? I just gave it a little once over and hit with a light coat of primer so it would not flash rust.. Let me know...

**DaHos** · 12-04-2011, 01:08 PM

Quote:

Originally Posted by HeavyMetalChevy

I am working on getting a bunch of 67-68 grilles..

Well when you do clean me up a set of Steel headlight and grill surrounds.......PS any chance you heading up to MI for the Holidays?

LEX · 12-05-2011, 09:54 AM

Quote:

Originally Posted by HeavyMetalChevy

Hey man.. Thanks.. .Much appreciated.. I try to price them right as well.. Di you receive the cowl??? I just gave it a little once over and hit with a light coat of primer so it would not flash rust.. Let me know...

I'm going to have to hold off on the brake assembly for now. According to UPS, the cowl should arrive tomorrow. Thanks again!

Posted via Mobile Device

HeavyMetalChevy · 12-05-2011, 04:43 PM

Quote:

Originally Posted by LEX

I'm going to have to hold off on the brake assembly for now. According to UPS, the cowl should arrive tomorrow. Thanks again!

Posted via Mobile Device

Yeah that's cool buddy... I am sure we will hear from each other either way... Cool Cool yep yep!!!

11-02-2011, 08:07 PM	#26
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Blasted and zinc phosphate parts YEAH buddy!!! Sorry taking so long... I am getting decimated by shipping this week and still working out a way to Pickup my next truck Northwest Indy and ship out two Greyhound packs in the same trip... I was in no way putting your stuff out there for grabs... Just showing progress in my technique and eye for detail... Got to fine tune this new blaster and it should turn out pretty darn efficient!!! __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

11-02-2011, 08:38 PM	#27
jondancer Registered User Join Date: Jul 2010 Location: central michigan Posts: 1,194	Re: Blasted and zinc phosphate parts I have plenty of time, but I would like set. Keep me posted. Thanks. Posted via Mobile Device

11-11-2011, 12:56 AM	#28
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Blasted and zinc phosphate parts ttt __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

11-11-2011, 02:15 AM	#29
70-Shorty Registered User Join Date: Jul 2010 Location: Ontario CA Posts: 317	Re: Blasted and zinc phosphate parts Put me in line for a set of door hinges, striker plates (bolts & hardware), and an ash tray, let me know cost and ETA , did u ship the heater control? Thanks, Tim Posted via Mobile Device __________________ Ontario CA•70 Chevy Shortbed Fleetside C-10 71 Chevy Longbed Fleetside C-20 (sold ) 63 Chevy II Nova SS 02 Ford F-150 Harley-Davidson supercharged 5.4 2000 Harley Roadking Hot Bike Baggers Mag Shoot http://s263.photobucket.com/albums/i...oot/?start=all some truck lettering & flame jobs http://www.flickr.com/photos/4950319...7602894916215/

11-11-2011, 07:44 PM	#30
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Blasted and zinc phosphate parts Everyone... My Pressure switch went out on my compressor today... Very hard to track down for Black Max 100 gallon...With a little luck found it but of course it had to be Friday!!! Will be receiving new switch mid week.. .Sorry for the delay and I will expedite and keep posted... Just glad I found one.. I have a smaller portable 100 psi tank I will see how it does... Thanks in advance for your patience. Duane __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

11-11-2011, 09:57 PM	#32
jondancer Registered User Join Date: Jul 2010 Location: central michigan Posts: 1,194	Re: Blasted and zinc phosphate parts I will be sending the money for the door hinges and tailgate hinges. Thanks Posted via Mobile Device

11-18-2011, 07:49 PM	#34
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Blasted and zinc phosphate parts pic updates Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

11-18-2011, 07:52 PM	#35
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Blasted and zinc phosphate parts more honing in... FINALLY got pressure switch!!!!! Just a little to go here... Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

11-18-2011, 07:55 PM	#36
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Blasted and zinc phosphate parts core end supports flash rust must go!!! lol Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

11-22-2011, 01:19 AM	#39
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Blasted and zinc phosphate parts ttt __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

11-27-2011, 03:31 AM	#40
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Blasted and zinc phosphate parts ttt __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

12-03-2011, 03:25 PM	#41
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Blasted and zinc phosphate parts cowl....moo moo lol Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

12-03-2011, 06:14 PM	#42
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Blasted and zinc phosphate parts 67 grille.. .Sorry...grille is a showcase of my work... I will be posting one as "for sale" A.S.A.P. My apologies..it was already spoken for before I blasted it.. Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog Last edited by HeavyMetalChevy; 12-04-2011 at 01:16 AM.

12-04-2011, 12:19 AM	#43
pops45 Junior Member Join Date: Jan 2010 Location: Sacramento, ca Posts: 94	Re: Blasted and zinc phosphate parts How much for the grille shipped to 95816? I assume i will work on a 68???? Thanks

12-04-2011, 01:26 AM	#45
pops45 Junior Member Join Date: Jan 2010 Location: Sacramento, ca Posts: 94	Re: Blasted and zinc phosphate parts OK no worries. LMK when you have one available. Joe



Register or Log In To remove these advertisements.

12-04-2011, 02:02 AM	#46
LEX Registered User Join Date: Oct 2011 Location: Houston, Texas Posts: 884	Re: Blasted and zinc phosphate parts Duane, these parts are clean. I'm eyeing the emergency brake assembly. I just took my dash apart and will see if mine is worth saving. I might snag that. I'll let ya know. Posted via Mobile Device

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.