MD Parting '91 Scottsdale Suburban

[special-K]

Turner16,Ajax,Ontario has 400 postal codes. I have the bezel and all dash vent packed and am leaving for FedEx. I thought you had given your code. I'll have to get an estimate from giving an assortment of codes I guess.

[manimal]

Originally Posted by special-K

I didn't get to pulling it last weekend. But,I can get pictures today.

no worries,at your convenience. Thanks

[special-K]

Originally Posted by manimal

no worries,at your convenience. Thanks

I took it out yesterday evening for pictures,but it's not a gear reduction. Also,I tested it and it is messed up anyway. It must have broken when I cranked it and the engine was seized. This was in '06 and I either forgot or didn't notice that being preoccupied with realizing the motor just blew. Sorry

Originally Posted by old Rusty C10

ok as long as the back end of that dash pad inlay is good ( the plastic tabs dont fall off when removing it you can give me shipped to 08859 in NJ

It looks like about $12 to ship in a conduit tube...very safe. How about $15 + $12 = $27 shipped

Originally Posted by turner16

Interested in the Dash Bezel and the AC vents in the dash. And the defrost vents.

I gotta say,shipping was a shocker for me for such a light box. I PM'd you about it and we can go from there. Results will be posted here in the thread.

[special-K]

Originally Posted by str8axle55

Interested in the 2nd row shoulder belts if they are working. I don`t care what color. What kind of shape is the body tub in?

As you know,I broke my torx socket. I haven't gotten another as of yet. If you are still interested I believe I will cut the floor around the mount so I can get more serious with the stubborn bolt in a vice or whatever. The belts are fine w/no broken plastic covers. Just gotta get'em out!

Originally Posted by 48cj2a

How much for the A/C Compressor, all mounting brackets and hardware with the wiring harness. I'd like to retro fit it to a non A/C 6.2 and I need everything for A/C. Don't care if the compressor is junk - I'd use it as a core to match correctly. zip 61607

I know the lines would be a pain but I'd like a price for them too as a optional package.

I'll get all the out and weighed in the next day or two. Sorry for the wait. I will say I want no less than the $100 price I listed. If still interested let me know. I'll know about the harness,too. My concern is the '91 has an electronic speedo as well as ECM,all because of the 4L80E,and my main interest is in getting all that intact for a direct swap into another square body.

[manimal]

Thanks Tim.

[old Rusty C10]

$27 do you want me to paypal you or send you a money order and if so please tell me where and I will get payment out as soon as I get on here and see your post. If there is private info please PM me with that as you shouldnt leave your address on the thread or stuff like that

[special-K]

Dash insert sold to Old Rusty C10 pending payment

[str8axle55]

[QUOTE=special-K;5016754]As you know,I broke my torx socket. I haven't gotten another as of yet. If you are still interested I believe I will cut the floor around the mount so I can get more serious with the stubborn bolt in a vice or whatever. The belts are fine w/no broken plastic covers. Just gotta get'em out!

No problem, just hack them out. PM me when you are ready.

[48cj2a]

Originally Posted by special-K

I'll get all the out and weighed in the next day or two. Sorry for the wait. I will say I want no less than the $100 price I listed. If still interested let me know. I'll know about the harness,too. My concern is the '91 has an electronic speedo as well as ECM,all because of the 4L80E,and my main interest is in getting all that intact for a direct swap into another square body.

What did you figure out on the harness and shipping to 61607?

[Rich'sRed86]

Did this have front buckets? If so, I'd be interested in the mounting tabs. Please let me know

[Liddy71]

door hinges drivers side I have new gm bushing and pins i can rebuild them. shipped to 25570

[special-K]

Originally Posted by 48cj2a

What did you figure out on the harness and shipping to 61607?

Still don't have it all out yet. We had a lot of rain last week,then Thanksgiving. I'll see how far I get today.

Originally Posted by Rich'sRed86

Did this have front buckets? If so, I'd be interested in the mounting tabs. Please let me know

Sorry,it's a bench seat Scottsdale

Originally Posted by Liddy71

door hinges drivers side I have new gm bushing and pins i can rebuild them. shipped to 25570

I have the doors sold,but not gone yet. I'll ask if he needed the hinges. They wouldn't need rebuilt.

[Liddy71]

let me know Thanks

[87 dually burb]

floor from center seats back
head liner boards without rear ac
can pic up

[special-K]

Originally Posted by 87 dually burb

floor from center seats back
head liner boards without rear ac
can pic up

You're talking about the backer from behind the upholstery,right? How does $25 sound?

Due to a miscommunication,the dash bezel and all a/c vents,as well as defroster vents are available. I have them packaged to ship and would like $30 + shipping. All but the defroster vents can be seen back earlier in this thread.

[Liddy71]

ever find out about the hinges

[87 dually burb]

I want the metal floor from center seat to tail gate and both head liner pieces if it doesnt have rear ac

[special-K]

Originally Posted by Liddy71

ever find out about the hinges

Not yet. I'l try him again tonight. He's hard to catch up with.

Originally Posted by 87 dually burb

I want the metal floor from center seat to tail gate and both head liner pieces if it doesnt have rear ac

It's a barn door model,if that matters. The headliner's gone but all the backer and bows are there. Non-a/c.

[87 dually burb]

ok price on cut out floor and and headliner panels
can come on a sat and help with floor

[yellowGT]

hows the rear bumper and would you ship it? 75040

[special-K]

Originally Posted by Liddy71

ever find out about the hinges

The guy who bought the doors needs those...sorry.

Originally Posted by 87 dually burb

I want the metal floor from center seat to tail gate and both head liner pieces if it doesnt have rear ac

I'm afraid that will create a hulk that's hard for me to deal with when it comes to hauling off. I'd sell you the whole thing for $300 and you'd have some extra stuff to sell or just scrap it. I think that's the only way I could handle that. It is a good floor.

Originally Posted by yellowGT

hows the rear bumper and would you ship it? 75040

The bumper and brackets are straight. The problem is the chrome is gouged from dragging things out the back.

Here are the rear doors...$100 pr:

[87 dually burb]

sounds good let me know when its ready to be drug off

[thirdstreettito]

Tim, whats the size on the wheels? 15x8? 16x7?

[special-K]

Originally Posted by 87 dually burb

sounds good let me know when its ready to be drug off

I've been busy and kinda let this thing slide lately.I really just need to get the transmission/t-case/ECM/harness out and a couple little things like the rear seatbelts and a/c stuff off the motor,then I'm done. I'll keep in touch.

Originally Posted by thirdstreettito

Tim, whats the size on the wheels? 15x8? 16x7?

Those are the stock 15" wheels off my '85 Jimmy. I think they are 7".

[Liddy71]

are the headlight buckets ,springs,mounting clips still there how much ship to 25570