IN 1969 C-10 Custom part out - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HeavyMetalChevy · 11-08-2011, 10:45 PM

71 hitch pics

j ripper · 11-08-2011, 10:49 PM

[QUOTE=HeavyMetalChevy;4998751]jripper... I have two different size mirrors you wanting chrome or painted???[/QUOTE
not sure. can you post a pic of what you have avail ? arms too?

HeavyMetalChevy · 11-08-2011, 10:55 PM

This 69 hitch pics Reese style I believe it is 6000 lb rating because the main horizontal tubular steel frame is bigger

HeavyMetalChevy · 11-08-2011, 10:58 PM

[quote=j ripper;4998780]

Quote:

Originally Posted by HeavyMetalChevy

jripper... I have two different size mirrors you wanting chrome or painted???[/QUOTE
not sure. can you post a pic of what you have avail ? arms too?

well do you want square mirrors or round ones??? here are the round ones the third pic is the size difference.. .the difference is just the actual mirror diameter... All the arms for the round style are same length I believe.

The first pic is not the mirror back discolored...It is showing the left where I wiped down and the dust on the right... And that rust drip comes right off with 0000 steel wool... I can polish the arms that is why I was asking if you wanted chrome or painted..

jessewebb · 11-08-2011, 11:06 PM

No luck on a cab yet. Same thing happened to me at Tims. I was wanting a cowl hood. I picked up the A/C brackets and there was a warehouse full of cowl hoods. Lol. I have found a garage to do my work. Hope to have it finished and ready to paint by March. I'll be in touch. Gonna hit the hay. Haven't got use to this time chang.
Posted via Mobile Device

HeavyMetalChevy · 11-08-2011, 11:07 PM

Quote:

Originally Posted by cdp

HI , Whats the condition of front bumper? Is this a straight good core for plating and how much to 44305? Not interested in brackets. Thanks Chris

CDP... It needs straightened but nothing major...good shiny chrome but typical scratches... I got a guy...lol Let me know and I will get it straightened...No cost to you

HeavyMetalChevy · 11-08-2011, 11:10 PM

Quote:

Originally Posted by Leroy-B1

what about steering wheel?

Leroy...any word on the tailgate??? and the steering wheel is NICE aftermarket... You noticed that correct??? Just letting you know not factory wheel..
Thanks,
Duane

j ripper · 11-08-2011, 11:17 PM

[quote=HeavyMetalChevy;4998804]

Quote:

Originally Posted by j ripper

well do you want square mirrors or round ones??? here are the round ones the third pic is the size difference.. .the difference is just the actual mirror diameter... All the arms for the round style are same length I believe.

The first pic is not the mirror back discolored...It is showing the left where I wiped down and the dust on the right... And that rust drip comes right off with 0000 steel wool... I can polish the arms that is why I was asking if you wanted chrome or painted..

i like the setup in the first picture, large round. do you have the mate for the driver door. mirror head and arm?

fwells67 · 11-08-2011, 11:20 PM

any word on the rear sport bumper and brackets

HeavyMetalChevy · 11-08-2011, 11:21 PM

[quote=j ripper;4998839]

Quote:

Originally Posted by HeavyMetalChevy

i like the setup in the first picture, large round. do you have the mate for the driver door. mirror head and arm?

Yes I do...The mirror is broke though... I am a glazier by trade though... that is trade name for commercial window and door installation.. .I can cut a new piece and do you want them painted like they are or chrome arms and mounting??

HeavyMetalChevy · 11-08-2011, 11:25 PM

Quote:

Originally Posted by fwells67

any word on the rear sport bumper and brackets

Few dents on rear bumper I am afraid...but like I mentioned about the front...I got a guy... lol I can have it straightened at virtually no cost and the chrome is nice an shiny but typical scratching...No gouges though... I will get better daylight pics of much more tomorrow.. You are up pending Larry... Pending pics the first "I take it" will be the rightful owner...

fwells67 · 11-08-2011, 11:29 PM

Quote:

Originally Posted by HeavyMetalChevy

Few dents on rear bumper I am afraid...but like I mentioned about the front...I got a guy... lol I can have it straightened at virtually no cost and the chrome is nice an shiny but typical scratching...No gouges though... I will get better daylight pics of much more tomorrow.. You are up pending Larry... Pending pics the first "I take it" will be the rightful owner...

how much for the bumper and brackets

j ripper · 11-08-2011, 11:30 PM

[quote=HeavyMetalChevy;4998849]

Quote:

Originally Posted by j ripper

Yes I do...The mirror is broke though... I am a glazier by trade though... that is trade name for commercial window and door installation.. .I can cut a new piece and do you want them painted like they are or chrome arms and mounting??

im glazing a 30 lite sash i made tomorrow, funny you mention the trade. i can handle the piece of glass. i would like the 2 mirrors as they are along with the painted mirror arms as they are.
when you get a chance could you give me a total to napa ca 94558 along with a pic of exactly what you will be sending... no hurry, josh

HeavyMetalChevy · 11-08-2011, 11:34 PM

[quote=j ripper;4998864]

Quote:

Originally Posted by HeavyMetalChevy

im glazing a 30 lite sash i made tomorrow, funny you mention the trade. i can handle the piece of glass. i would like the 2 mirrors as they are along with the painted mirror arms as they are.
when you get a chance could you give me a total to napa ca 94558 along with a pic of exactly what you will be sending... no hurry, josh

HAH HAH.. .cool

most people hear glazing and correlate that to donuts

The pics of the blue painted one is what I will be sending.. .the driver side is IDENTICAL in condition but needs mirror...

HeavyMetalChevy · 11-08-2011, 11:36 PM

Quote:

Originally Posted by fwells67

how much for the bumper and brackets

fwells somewhere around 150 I am thinking.. I want to make sure I have right brackets .and ship should not be bad seeing how you are in Columbus...Been there quite a few times actually

j ripper · 11-08-2011, 11:39 PM

[quote=HeavyMetalChevy;4998877]

Quote:

Originally Posted by j ripper

HAH HAH.. .cool

most people hear glazing and correlate that to donuts

The pics of the blue painted one is what I will be sending.. .the driver side is IDENTICAL in condition but needs mirror...

good deal.. let me know.

HeavyMetalChevy · 11-08-2011, 11:45 PM

what is your zip buddy???

HeavyMetalChevy · 11-09-2011, 12:03 AM

Quote:

Originally Posted by Hollywood Knight

interested in the grill if it is in very good condition .

Mr. Knight...I will clean up and inspect the grille thuroughly tomorrow in daylight and post update pics... As you know they can be REALLY deceiving... There are no dents at all I am sure.. .just one "bad" scratch" on driver top side... Chrome finish is holding good though...I will let you know in the AM... you are def first up buddy.

HeavyMetalChevy · 11-09-2011, 12:06 AM

Quote:

Originally Posted by blap

Interested in the Factory gauge cluster and the under dash after market gauges

blap... under dash gauges 30 shipped.. .they were just installed... Brand new in and out... Checking on gauge clusters...get back with me on what exactly you need

HeavyMetalChevy · 11-09-2011, 12:09 AM

15" $50/pc

HeavyMetalChevy · 11-09-2011, 12:15 AM

Windshield Chrome trim insert.. .NICE!!! not one scratch...$40 bucks shipped

HeavyMetalChevy · 11-09-2011, 12:25 AM

pass side lower trim...no dings or seep scratches...Tape,mask,restore.. .Wah Lah
$40 shipped

Hollywood Knight · 11-09-2011, 12:25 AM

Quote:

Originally Posted by HeavyMetalChevy

Mr. Knight...I will clean up and inspect the grille thuroughly tomorrow in daylight and post update pics... As you know they can be REALLY deceiving... There are no dents at all I am sure.. .just one "bad" scratch" on driver top side... Chrome finish is holding good though...I will let you know in the AM... you are def first up buddy.

Sounds great!

SCOOBYDOOBYDOO · 11-09-2011, 01:04 AM

do you have the horn and the cig lighter with out wiring

HeavyMetalChevy · 11-09-2011, 01:21 AM

Quote:

Originally Posted by SCOOBYDOOBYDOO

do you have the horn and the cig lighter with out wiring

Actual horn or horn button? And yes I have Cig Lighter...You need the housing or just the actual lighter?

11-08-2011, 10:45 PM	#26
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: 1969 C-10 Custom part out 71 hitch pics Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

11-08-2011, 10:49 PM	#27
j ripper Registered User Join Date: Jul 2010 Location: napa ca. Posts: 199	Re: 1969 C-10 Custom part out [QUOTE=HeavyMetalChevy;4998751]jripper... I have two different size mirrors you wanting chrome or painted???[/QUOTE not sure. can you post a pic of what you have avail ? arms too? __________________ edited by staff

11-08-2011, 10:55 PM	#28
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: 1969 C-10 Custom part out This 69 hitch pics Reese style I believe it is 6000 lb rating because the main horizontal tubular steel frame is bigger Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

11-08-2011, 11:06 PM	#30
jessewebb Registered User Join Date: May 2010 Location: beckley, WV. Posts: 823	Re: 1969 C-10 Custom part out No luck on a cab yet. Same thing happened to me at Tims. I was wanting a cowl hood. I picked up the A/C brackets and there was a warehouse full of cowl hoods. Lol. I have found a garage to do my work. Hope to have it finished and ready to paint by March. I'll be in touch. Gonna hit the hay. Haven't got use to this time chang. Posted via Mobile Device __________________ *Pete* The worst I ever had was wonderful *69 SWB* work in progress *97 Ranger* 6in. lift on 35's *04 325i* lady's ride

11-08-2011, 11:20 PM	#34
fwells67 Registered User Join Date: Mar 2011 Location: columbus ohio Posts: 302	Re: 1969 C-10 Custom part out any word on the rear sport bumper and brackets

11-08-2011, 11:45 PM	#42
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: 1969 C-10 Custom part out what is your zip buddy??? __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

11-09-2011, 12:09 AM	#45
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: 1969 C-10 Custom part out 15" $50/pc Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog Last edited by HeavyMetalChevy; 11-09-2011 at 12:17 AM.

11-09-2011, 12:15 AM	#46
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: 1969 C-10 Custom part out Windshield Chrome trim insert.. .NICE!!! not one scratch...$40 bucks shipped Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

11-09-2011, 12:25 AM	#47
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: 1969 C-10 Custom part out pass side lower trim...no dings or seep scratches...Tape,mask,restore.. .Wah Lah $40 shipped Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

11-09-2011, 01:04 AM	#49
SCOOBYDOOBYDOO Registered User Join Date: Feb 2010 Location: DANA POINT CA Posts: 256	Re: 1969 C-10 Custom part out do you have the horn and the cig lighter with out wiring __________________ ScoobyDoobyDoo

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.