OH parting 72 c/20 custom camper - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fwells67 · 11-13-2011, 10:04 PM

Quote:

Originally Posted by OhOneWS6

I'll take tail light trim and screws pending price shipped to 75048 and better pics. Put me in line on door panels and arm rests pending better pics.

trim looks good has a couple very small nicks but you have to look very hard to see them $26 shipped

67mater · 11-13-2011, 10:09 PM

rear springs? IL 60124. do they have the extra over loads and brackets?

**DeadheadNM** · 11-13-2011, 10:24 PM

Quote:

Originally Posted by fwells67

windshield molding is excellent, dash is orig in very good shape and it is black

Good deal. I'll take these. Too bad the windshield gasket can't come out intact or I'd take that too. Let me know about the vent windows and the harnesses when possible. Shipping will be to 87110. Thanks again.

**DeadheadNM** · 11-13-2011, 10:26 PM

What's the condition of the AC center vent?

tanman722001 · 11-13-2011, 10:34 PM

What shape are the cab light and rubber?Is the rubber soft or stiff?

OhOneWS6 · 11-13-2011, 10:36 PM

Quote:

Originally Posted by fwells67

trim looks good has a couple very small nicks but you have to look very hard to see them $26 shipped

If I remember right the screws have a little spacer on them. If that price includes the screws then I want them pending better pics.

I'm still interested in the door panels/arm rests and inner fender. I realize I am second in line on the panels.

PayPal OK?

c1069 · 11-13-2011, 11:06 PM

I'll take door panels if they are in good cond and they not are chalky shipped to 93250

c1069 · 11-13-2011, 11:09 PM

and sun visors too. Thanks

**6t727t2** · 11-13-2011, 11:11 PM

Both sets of door custom camper emblems if real nice and all mounting studs good?

fwells67 · 11-13-2011, 11:23 PM

Quote:

Originally Posted by DeadheadNM

Good deal. I'll take these. Too bad the windshield gasket can't come out intact or I'd take that too. Let me know about the vent windows and the harnesses when possible. Shipping will be to 87110. Thanks again.

i will try to get the gasket out so you could reuse it. the vent windows look very good but i will give them a better look over and let you know

cpisani70@aol.com · 11-13-2011, 11:24 PM

Small or big block truck?
Posted via Mobile Device

fwells67 · 11-13-2011, 11:27 PM

Quote:

Originally Posted by DeadheadNM

What's the condition of the AC center vent?

let me check and i will let you know

fwells67 · 11-13-2011, 11:28 PM

Quote:

Originally Posted by tanman722001

What shape are the cab light and rubber?Is the rubber soft or stiff?

i think they are good but let me get them off and make sure first

fwells67 · 11-13-2011, 11:29 PM

Quote:

Originally Posted by OhOneWS6

If I remember right the screws have a little spacer on them. If that price includes the screws then I want them pending better pics.

I'm still interested in the door panels/arm rests and inner fender. I realize I am second in line on the panels.

PayPal OK?

yes that will include all hardware with them

fwells67 · 11-13-2011, 11:30 PM

Quote:

Originally Posted by cpisani70@aol.com

Small or big block truck?
Posted via Mobile Device

bigblock

Critterman71 · 11-13-2011, 11:31 PM

Hi how much for the rolling chassis and bed and cab

fwells67 · 11-13-2011, 11:31 PM

Quote:

Originally Posted by 6t727t2

Both sets of door custom camper emblems if real nice and all mounting studs good?

let me see after i get them off

Critterman71 · 11-13-2011, 11:32 PM

Hi how much for the rolling chassis and cab - box

fwells67 · 11-13-2011, 11:32 PM

Quote:

Originally Posted by Critterman71

Hi how much for the rolling chassis and bed and cab

bed is gone

Critterman71 · 11-13-2011, 11:34 PM

cab and chassis?

OhOneWS6 · 11-13-2011, 11:57 PM

Quote:

Originally Posted by fwells67

yes that will include all hardware with them

Perfect. If it is OK with you I will wait to see if slammer72 takes the door panels. That way I can paypal you once if he passes.

thanks,
Matt

fwells67 · 11-14-2011, 12:04 AM

Quote:

Originally Posted by OhOneWS6

Perfect. If it is OK with you I will wait to see if slammer72 takes the door panels. That way I can paypal you once if he passes.

thanks,
Matt

no problem

**thelonerife** · 11-14-2011, 12:06 AM

looks like a highlander

**1970greenc10** · 11-14-2011, 05:26 PM

any word on all the lower molding yet?
Thanks,Marty

jlaird · 11-14-2011, 09:11 PM

Still interested in the tailgate. Do you have closer up pictures of both the inside and outside? Also would like to see close up pictures with top guard piece removed. Shipping to 12095. Thanks.

Josh

11-13-2011, 10:09 PM	#27
67mater Registered User Join Date: Sep 2007 Location: Mundelein, IL Posts: 862	Re: parting 72 c/20 custom camper rear springs? IL 60124. do they have the extra over loads and brackets? __________________ time is inversely proportional to money; that's why it takes me so long 1967 K10 1967 Camaro

11-13-2011, 10:26 PM	#29
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,424	Re: parting 72 c/20 custom camper What's the condition of the AC center vent? __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

11-13-2011, 10:34 PM	#30
tanman722001 Registered User Join Date: Oct 2010 Location: Mocksville,NC Posts: 419	Re: parting 72 c/20 custom camper What shape are the cab light and rubber?Is the rubber soft or stiff? __________________ 1991 GMC K2500 4X4 350/auto 1991 Chevy S10 ext cab. 1990 Chevy S10 1993 Chevy S10 Blazer 4dr 4.3 Vortex/Auto

11-13-2011, 11:06 PM	#32
c1069 Registered User Join Date: Apr 2010 Location: McFarland CA Posts: 1,392	Re: parting 72 c/20 custom camper I'll take door panels if they are in good cond and they not are chalky shipped to 93250 __________________ Pancho 69 c/10 step side 454/400 with 3.07

11-13-2011, 11:09 PM	#33
c1069 Registered User Join Date: Apr 2010 Location: McFarland CA Posts: 1,392	Re: parting 72 c/20 custom camper and sun visors too. Thanks __________________ Pancho 69 c/10 step side 454/400 with 3.07

11-13-2011, 11:11 PM	#34
6t727t2 Active Member Join Date: Dec 2004 Location: NJ Posts: 6,431	Re: parting 72 c/20 custom camper Both sets of door custom camper emblems if real nice and all mounting studs good?

11-13-2011, 11:24 PM	#36
cpisani70@aol.com Registered User Join Date: Oct 2010 Location: Wallingford CT Posts: 260	Re: parting 72 c/20 custom camper Small or big block truck? Posted via Mobile Device

11-13-2011, 11:31 PM	#41
Critterman71 Registered User Join Date: Nov 2008 Location: Lansing Mi Posts: 642	Re: parting 72 c/20 custom camper Hi how much for the rolling chassis and bed and cab

11-13-2011, 11:32 PM	#43
Critterman71 Registered User Join Date: Nov 2008 Location: Lansing Mi Posts: 642	Re: parting 72 c/20 custom camper Hi how much for the rolling chassis and cab - box

11-13-2011, 11:34 PM	#45
Critterman71 Registered User Join Date: Nov 2008 Location: Lansing Mi Posts: 642	Re: parting 72 c/20 custom camper cab and chassis?

11-14-2011, 12:06 AM	#48
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: parting 72 c/20 custom camper looks like a highlander __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

11-14-2011, 05:26 PM	#49
1970greenc10 Senior Member Join Date: Oct 2008 Location: Forestville, NY Posts: 225	Re: parting 72 c/20 custom camper any word on all the lower molding yet? Thanks,Marty __________________ My Chevys 79 caprice classic 70 c/10 69 k/10 03 silverado

11-14-2011, 09:11 PM	#50
jlaird Senior Member Join Date: May 2004 Location: johnstown, NY Posts: 2,393	Re: parting 72 c/20 custom camper Still interested in the tailgate. Do you have closer up pictures of both the inside and outside? Also would like to see close up pictures with top guard piece removed. Shipping to 12095. Thanks. Josh

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.