OH parts 72 custom/30 - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fwells67 · 11-18-2011, 02:31 AM

Quote:

Originally Posted by DeadheadNM

I appreciate your effort and no rush. If the defrost vents are medium olive and intact I'll take them. When possible, let me know what shape this dash pad is in. Maybe I'll take this one too. Also, if the chrome vent windows are in better shape than those on your C20 let me know - I'd like an excellent pair. Best, Pete

i will let you know on the vents, he did tell me the dash pad was green and spray painted black and is peeling and the vent windows are not chrome on this one they are black. the vent windows on that c/20 are in excellent shape and will be perfect for you

BBrendal · 11-18-2011, 02:54 AM

In line for tach.

71suburban/70CST · 11-18-2011, 07:23 AM

I would like to be first on the No spin axle pending price. Presume it is the Eaton third member rear(?). Please advise on price etc. Only need the carrier and unit, not entire rear.
Thanks,
Justin

cucvzuz · 11-18-2011, 08:44 AM

I am very interested in the front fenders pending pictures,

I also need the front coil springs.

How much.

cucvzuz · 11-18-2011, 08:46 AM

How is the pass inner fender, need that to

**DeadheadNM** · 11-18-2011, 09:32 AM

Quote:

Originally Posted by fwells67

i will let you know on the vents, he did tell me the dash pad was green and spray painted black and is peeling and the vent windows are not chrome on this one they are black. the vent windows on that c/20 are in excellent shape and will be perfect for you

Thank you. I'll pass on this dash pad then. LMK what the vents are like when possible. I would consider this glove box door too pending condition/price. Pete

tanman722001 · 11-18-2011, 09:48 AM

Is the defroster tubes any good?Hows the rubber floor mat?And the chrome plates by the door?Thanks Tony

no moa · 11-18-2011, 10:41 AM

When you get it down to the frame, I need the rear spring frame Mounts Mine are rusted Out and a couple cross members, and the split driveshaft support.
In line for the glovebox door also.

Condition depending. I also am in no rush. Get better soon.
Thanks
Glen
Posted via Mobile Device

OhOneWS6 · 11-18-2011, 11:06 AM

Put me in line on the steering wheel.

tow guys · 11-18-2011, 07:47 PM

Interested in the mirrors pending condition, price with shipping to zip 08721.
Thanks,

Tony

**zicc1835** · 11-18-2011, 07:59 PM

Just checking to see if I am first in line on the passenger inner fender and door panels let me know con diction or pics and p m me with pay info
Thanks
Jess

Quote:

Originally Posted by zicc1835

ill take the door panels and the passenger side inner fender well if its solid
thanks

Posted via Mobile Device

My72BB · 11-18-2011, 09:43 PM

I am interested in price on complete clutch linkage including bracket on motor, bell crank, clutch rod...etc.

Also, how much for bellhousing and transmission?

I would be able to pick up so no shipping would be involved on transmission.

Thanks, Alan

REEDS 72 · 11-18-2011, 09:54 PM

All take the fuel line from the pump to the carb if the fittings are not stripout thanks.

fwells67 · 11-19-2011, 01:17 AM

Quote:

Originally Posted by 71suburban/70cst

i would like to be first on the no spin axle pending price. Presume it is the eaton third member rear(?). Please advise on price etc. Only need the carrier and unit, not entire rear.
Thanks,
justin

how about $125 on all parts needed plus shipping

fwells67 · 11-19-2011, 01:22 AM

Quote:

Originally Posted by cucvzuz

i am very interested in the front fenders pending pictures,

i also need the front coil springs.

How much.

i will let you know and post pics when he gets it apart this weekend. If these fenders are not that good the ones i have on the c/20 post are very good

fwells67 · 11-19-2011, 01:24 AM

Quote:

Originally Posted by cucvzuz

how is the pass inner fender, need that to

i will know the condition this weekend

fwells67 · 11-19-2011, 01:25 AM

Quote:

Originally Posted by tanman722001

is the defroster tubes any good?hows the rubber floor mat?and the chrome plates by the door?thanks tony

i will let you know this weekend

fwells67 · 11-19-2011, 01:27 AM

Quote:

Originally Posted by zicc1835

just checking to see if i am first in line on the passenger inner fender and door panels let me know con diction or pics and p m me with pay info
thanks
jess

posted via mobile device

yes you are first up on these parts from this truck. I will post you some pics when they are pulled

**zicc1835** · 11-19-2011, 01:28 AM

Quote:

Originally Posted by zicc1835

Just checking to see if I am first in line on the passenger inner fender and door panels let me know con diction or pics and p m me with pay info
Thanks
Jess

Posted via Mobile Device

Posted via Mobile Device

fwells67 · 11-19-2011, 01:29 AM

Quote:

Originally Posted by my72bb

i am interested in price on complete clutch linkage including bracket on motor, bell crank, clutch rod...etc.

Also, how much for bellhousing and transmission?

I would be able to pick up so no shipping would be involved on transmission.

Thanks, alan

how about $300 on all parts having to do with the trans and linkage

fwells67 · 11-19-2011, 01:30 AM

Quote:

Originally Posted by reeds 72

all take the fuel line from the pump to the carb if the fittings are not stripout thanks.

i will let you know the condition when pulled

**zicc1835** · 11-19-2011, 01:30 AM

I thought I was first in line on inner fender and door panels let me know
Posted via Mobile Device

**zicc1835** · 11-19-2011, 01:31 AM

Ok got the first in line message .. No rush thank you
Posted via Mobile Device

old Chevy guy · 11-19-2011, 10:42 AM

What condition are the doors? How much? and can i see pictures if they are good? looking for something not rusted through. Thanks

68panelman · 11-19-2011, 10:57 AM

That truck looks too good to me to part. I would of liked to purchased whole. Most people did not option these out like that, shame. Imo

11-18-2011, 02:54 AM	#27
BBrendal Recalculating..... Join Date: Nov 2010 Location: New Lenox Il Posts: 686	Re: parts 72 custom/30 In line for tach. __________________ Brian - (BBrendal) 1969 Chevy Camaro Z28 1972 Chevy Blazer CST 2004 GMC Yukon (The truck that pulls the car trailer) 1972 Chevy Blazer CST #2 (Finished and sold!) Blazer build link... http://s1213.photobucket.com/albums/...rendal/Blazer/

11-18-2011, 07:23 AM	#28
71suburban/70CST Registered User Join Date: Feb 2010 Location: Chestertown, Md Posts: 102	Re: parts 72 custom/30 I would like to be first on the No spin axle pending price. Presume it is the Eaton third member rear(?). Please advise on price etc. Only need the carrier and unit, not entire rear. Thanks, Justin

11-18-2011, 08:44 AM	#29
cucvzuz Registered User Join Date: Jul 2010 Location: howell mi Posts: 248	Re: parts 72 custom/30 I am very interested in the front fenders pending pictures, I also need the front coil springs. How much.

11-18-2011, 08:46 AM	#30
cucvzuz Registered User Join Date: Jul 2010 Location: howell mi Posts: 248	Re: parts 72 custom/30 How is the pass inner fender, need that to

11-18-2011, 09:48 AM	#32
tanman722001 Registered User Join Date: Oct 2010 Location: Mocksville,NC Posts: 419	Re: parts 72 custom/30 Is the defroster tubes any good?Hows the rubber floor mat?And the chrome plates by the door?Thanks Tony __________________ 1991 GMC K2500 4X4 350/auto 1991 Chevy S10 ext cab. 1990 Chevy S10 1993 Chevy S10 Blazer 4dr 4.3 Vortex/Auto

11-18-2011, 10:41 AM	#33
no moa Registered User Join Date: Nov 2009 Location: maine Posts: 2,315	Re: parts 72 custom/30 When you get it down to the frame, I need the rear spring frame Mounts Mine are rusted Out and a couple cross members, and the split driveshaft support. In line for the glovebox door also. Condition depending. I also am in no rush. Get better soon. Thanks Glen Posted via Mobile Device __________________ 1972 C10 Deluxe.Shortbed. 402/400. A/C, white interior, needs complete restore. Project Red, white and blue. Used to be a Longbed apperently. http://67-72chevytrucks.com/vboard/s...d.php?t=451950 1971 c10 step 250 3 OTT 1969 c30 TOW-MATER. 307 4 speed, holmes 440 body. http://67-72chevytrucks.com/vboard/s...d.php?t=451082 2006 CTS-V LS2 6spd.

11-18-2011, 11:06 AM	#34
OhOneWS6 Registered User Join Date: Dec 2009 Location: DFW, TX Posts: 764	Re: parts 72 custom/30 Put me in line on the steering wheel. __________________ 72 Cheyenne Super 1/2 LWB White/Dark Yellow 07 Avalanche 2LT 74 Sleek Craft Rebel Jet Boat W/Pontiac 400 Last edited by OhOneWS6; 11-18-2011 at 11:15 AM.

11-18-2011, 07:47 PM	#35
tow guys Registered User Join Date: Dec 2010 Location: Bayville NJ Posts: 385	Re: parts 72 custom/30 Interested in the mirrors pending condition, price with shipping to zip 08721. Thanks, Tony __________________ Check out my 70 GMC tow truck project here.......http://67-72chevytrucks.com/vboard/s...d.php?t=440431 Member of the 1-Ton Club! http://www.eastcoastcarandtruck.org

11-18-2011, 09:43 PM	#37
My72BB Registered User Join Date: Oct 2007 Location: Fairfield, PA Posts: 503	Re: parts 72 custom/30 I am interested in price on complete clutch linkage including bracket on motor, bell crank, clutch rod...etc. Also, how much for bellhousing and transmission? I would be able to pick up so no shipping would be involved on transmission. Thanks, Alan

11-18-2011, 09:54 PM	#38
REEDS 72 Registered User Join Date: Apr 2011 Location: AMERICAN FORK, UTAH Posts: 535	Re: parts 72 custom/30 All take the fuel line from the pump to the carb if the fittings are not stripout thanks.

11-19-2011, 01:30 AM	#47
zicc1835 Senior Member Join Date: Mar 2011 Location: Hanover NJ Posts: 4,318	Re: parts 72 custom/30 I thought I was first in line on inner fender and door panels let me know Posted via Mobile Device __________________ Grand Theft Auto https://67-72chevytrucks.com/vboard/...d.php?t=855961 Doc & Kim build http://67-72chevytrucks.com/vboard/s...d.php?t=722288 I am from the desert http://67-72chevytrucks.com/vboard/s...d.php?t=650332 basket case build SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=648557

11-19-2011, 01:31 AM	#48
zicc1835 Senior Member Join Date: Mar 2011 Location: Hanover NJ Posts: 4,318	Re: parts 72 custom/30 Ok got the first in line message .. No rush thank you Posted via Mobile Device __________________ Grand Theft Auto https://67-72chevytrucks.com/vboard/...d.php?t=855961 Doc & Kim build http://67-72chevytrucks.com/vboard/s...d.php?t=722288 I am from the desert http://67-72chevytrucks.com/vboard/s...d.php?t=650332 basket case build SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=648557

11-19-2011, 10:42 AM	#49
old Chevy guy Registered User Join Date: Apr 2007 Location: Foster Rhode Island Posts: 1,176	Re: parts 72 custom/30 What condition are the doors? How much? and can i see pictures if they are good? looking for something not rusted through. Thanks

11-19-2011, 10:57 AM	#50
68panelman Registered User Join Date: Jan 2011 Location: Delaware and Long Island, New York Posts: 3,458	Re: parts 72 custom/30 That truck looks too good to me to part. I would of liked to purchased whole. Most people did not option these out like that, shame. Imo

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.