IN Blasted 2wd Saginaw Power Steer Box - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HeavyMetalChevy · 02-08-2012, 04:03 PM

Quote:

Originally Posted by longhorn70gmc

Hello,
Is this still available? I am interested. What year and model did it exactly come out of? I am looking at installing it in my 1 ton Chevy Longhorn and it should work. The spline where the steering column connects/slides on, is it the smaller/30 or larger/36 spline? Did it have a pitman arm? Let me know,
R/

I bought a few of these in bulk a while back. I know it is for our year trucks just not sure what exact year. I purchased some 4x4 boxes too a while back. It is a 30 spline and I do not currently have any extra pitman arms...

Thanks,
Duane

mahanian · 02-08-2012, 04:56 PM

That looks great, how do you insure you don't get any sand past the input or output shaft seals?

HeavyMetalChevy · 02-08-2012, 05:01 PM

Quote:

Originally Posted by mahanian

That looks great, how do you insure you don't get any sand past the input or output shaft seals?

I did not directly blast those parts. Degreaser and acid compound works wonders!!!

longhorn70gmc · 02-09-2012, 06:26 PM

I'll Take it.
Thanks for getting back to me. I am going to go the Money order route. I will get that done up and let ya know. I looked at the steering box in the truck last night and it looked so dirty and grimmy. I already have the tools to swap the pieces over, so I am ahead of the game. Talk to you soon.
R/

HeavyMetalChevy · 02-09-2012, 09:45 PM

Quote:

Originally Posted by longhorn70gmc

I'll Take it.
Thanks for getting back to me. I am going to go the Money order route. I will get that done up and let ya know. I looked at the steering box in the truck last night and it looked so dirty and grimmy. I already have the tools to swap the pieces over, so I am ahead of the game. Talk to you soon.
R/

Sounds good! thanks much!!!

longhorn70gmc · 02-14-2012, 09:12 PM

Hey Bro,
I PMed ya and wanted you to know it is on its way to you. Talk to you soon.
R/

02-08-2012, 04:56 PM	#27
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Blasted 2wd Saginaw Power Steer Box That looks great, how do you insure you don't get any sand past the input or output shaft seals?

02-09-2012, 06:26 PM	#29
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: Blasted 2wd Saginaw Power Steer Box I'll Take it. Thanks for getting back to me. I am going to go the Money order route. I will get that done up and let ya know. I looked at the steering box in the truck last night and it looked so dirty and grimmy. I already have the tools to swap the pieces over, so I am ahead of the game. Talk to you soon. R/ __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!

02-14-2012, 09:12 PM	#31
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: Blasted 2wd Saginaw Power Steer Box Hey Bro, I PMed ya and wanted you to know it is on its way to you. Talk to you soon. R/ __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.