CA Parting 67 Chevy C-20 - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KrazyRay · 02-14-2012, 01:22 AM

It looks like a th400. I have a pile of 350 and 400 cores.

tackett11 · 02-14-2012, 01:38 AM

if its a 400 how much for it

KrazyRay · 02-14-2012, 01:44 AM

$50 for any 400 that is in unknown condition. I don't have any that I have personally driven.
Thanks,
Ray

**michael bustamante** · 02-14-2012, 12:31 PM

Wish you were closer id take a 400 for 50 bucks. That rad support hardware looked new, you still got it?

KrazyRay · 02-14-2012, 12:32 PM

I'm going to use it on my truck.
Thanks,
Ray

ScottG · 02-14-2012, 01:45 PM

How about the shift linkage? I want to convert my truck to auto.

ScottG · 02-14-2012, 01:56 PM

My bad, Just noticed it was gone in the pic.

jchav62 · 02-14-2012, 04:37 PM

Put me in line for the grille hoops... Please PM me if it gets to me.

Thanks! JC

KrazyRay · 02-14-2012, 07:33 PM

67 handle pics for Eric

**DaHos** · 02-14-2012, 10:39 PM

Quote:

Originally Posted by KrazyRay

67 handle pics for Eric

Ill get in line for these.......

Also condition of the rest of the cluster, gauge faces, circuit panel, etc...looking for one for parts.
Tail light harness
Dash pad

angelo_32806 · 02-15-2012, 10:18 AM

Do you have a title

KrazyRay · 02-15-2012, 10:30 AM

DaHos...I will check cluster. The bezel on it is broken so it might work for parts. $10 plus shipping. Don't have other parts.
angelo...sorry no title.

Thanks,
Ray

**DaHos** · 02-15-2012, 01:56 PM

Thx, price sounds good just let me know the condition of the gauge faces. Also if Eric passes on the handles let me know, D'
Posted via Mobile Device

KrazyRay · 02-15-2012, 02:18 PM

The bed is sold.
The handles are off to Eric's.

The tin looks good, but I'm no expert on these. The bezel is junk and the clear lens is cracked.

**DaHos** · 02-15-2012, 06:36 PM

Ill take the cluster, why I dont know.......

But anywho, also looking for a NICE Black seat belt retractor boot (driverside) and a drivers side steel mirror arm. Could save me some shipping $$ if you have them.

If you have the other items let me know Ill get PP to you asap. Guessing bout $12-15 on the shipping?

longhorn70gmc · 02-15-2012, 07:50 PM

Hello Ray,
I see a Hubcap installed on the rear driver wheel, is that available?
R/
Billy

KrazyRay · 02-15-2012, 09:12 PM

DaHos...I will check my parts stash.

longhorn...The cap is rough. $5 plus shipping if you want it.

Thanks,
Ray

Rudy67chevy · 02-15-2012, 10:22 PM

Quote:

Originally Posted by budnikguy

Interested in the gauge bezel if nice....and any locks with functioning key? LMK..thanks

I have an ignition with door locks an matching key. Pm me if interested
Posted via Mobile Device

longhorn70gmc · 02-16-2012, 08:06 PM

Quote:

Originally Posted by KrazyRay

DaHos...I will check my parts stash.

longhorn...The cap is rough. $5 plus shipping if you want it.

Thanks,
Ray

Hello Ray,
I'll take it, I enjoy restoring them. Is it the paintable steel version for our trucks? My zip is 93555
R/
Billy

KrazyRay · 02-16-2012, 08:25 PM

Quote:

Originally Posted by longhorn70gmc

Hello Ray,
I'll take it, I enjoy restoring them. Is it the paintable steel version for our trucks? My zip is 93555
R/
Billy

It is paintable...pm sent

MARIOS68PANEL · 02-20-2012, 01:52 PM

Are the hoops sold?

KrazyRay · 02-20-2012, 02:58 PM

I'm waiting on a payment for them.
Thanks,
Ray

**DaHos** · 02-20-2012, 03:25 PM

Quote:

Originally Posted by DaHos

Ill take the cluster, why I dont know.......

But anywho, also looking for a NICE Black seat belt retractor boot (driverside) and a drivers side steel mirror arm. Could save me some shipping $$ if you have them.

If you have the other items let me know Ill get PP to you asap. Guessing bout $12-15 on the shipping?

Hey Ray, any luck on the "extras"?

KrazyRay · 02-20-2012, 04:12 PM

No luck on the arm, but I still have to go through my belts.

02-14-2012, 01:22 AM	#26
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 67 Chevy C-20 It looks like a th400. I have a pile of 350 and 400 cores.

02-14-2012, 01:38 AM	#27
tackett11 Registered User Join Date: Oct 2011 Location: bakersfield ca Posts: 5	Re: Parting 67 Chevy C-20 if its a 400 how much for it

02-14-2012, 01:44 AM	#28
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 67 Chevy C-20 $50 for any 400 that is in unknown condition. I don't have any that I have personally driven. Thanks, Ray

02-14-2012, 12:31 PM	#29
michael bustamante Registered User Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,843	Re: Parting 67 Chevy C-20 Wish you were closer id take a 400 for 50 bucks. That rad support hardware looked new, you still got it? __________________ 1967custom

02-14-2012, 12:32 PM	#30
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 67 Chevy C-20 I'm going to use it on my truck. Thanks, Ray

02-14-2012, 01:45 PM	#31
ScottG Registered User Join Date: Feb 2012 Location: Ventura,Ca Posts: 745	Re: Parting 67 Chevy C-20 How about the shift linkage? I want to convert my truck to auto. __________________ '67 C20 LBW

02-14-2012, 01:56 PM	#32
ScottG Registered User Join Date: Feb 2012 Location: Ventura,Ca Posts: 745	Re: Parting 67 Chevy C-20 My bad, Just noticed it was gone in the pic. __________________ '67 C20 LBW

02-14-2012, 04:37 PM	#33
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: Parting 67 Chevy C-20 Put me in line for the grille hoops... Please PM me if it gets to me. Thanks! JC __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

02-14-2012, 07:33 PM	#34
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 67 Chevy C-20 67 handle pics for Eric Attached Images

02-15-2012, 10:18 AM	#36
angelo_32806 Registered User Join Date: May 2009 Location: Orlando FL Posts: 107	Re: Parting 67 Chevy C-20 Do you have a title

02-15-2012, 10:30 AM	#37
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 67 Chevy C-20 DaHos...I will check cluster. The bezel on it is broken so it might work for parts. $10 plus shipping. Don't have other parts. angelo...sorry no title. Thanks, Ray

02-15-2012, 01:56 PM	#38
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,855	Re: Parting 67 Chevy C-20 Thx, price sounds good just let me know the condition of the gauge faces. Also if Eric passes on the handles let me know, D' Posted via Mobile Device __________________ 1967 C10 SWB Owner - Rustbelt Restorations

02-15-2012, 02:18 PM	#39
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 67 Chevy C-20 The bed is sold. The handles are off to Eric's. The tin looks good, but I'm no expert on these. The bezel is junk and the clear lens is cracked. Attached Images

02-15-2012, 06:36 PM	#40
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,855	Re: Parting 67 Chevy C-20 Ill take the cluster, why I dont know....... But anywho, also looking for a NICE Black seat belt retractor boot (driverside) and a drivers side steel mirror arm. Could save me some shipping $$ if you have them. If you have the other items let me know Ill get PP to you asap. Guessing bout $12-15 on the shipping? __________________ 1967 C10 SWB Owner - Rustbelt Restorations

02-15-2012, 07:50 PM	#41
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: Parting 67 Chevy C-20 Hello Ray, I see a Hubcap installed on the rear driver wheel, is that available? R/ Billy __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!



Register or Log In To remove these advertisements.

02-15-2012, 09:12 PM	#42
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 67 Chevy C-20 DaHos...I will check my parts stash. longhorn...The cap is rough. $5 plus shipping if you want it. Thanks, Ray

02-20-2012, 01:52 PM	#46
MARIOS68PANEL Active Member Join Date: Mar 2005 Location: North Highlands. California Posts: 449	Re: Parting 67 Chevy C-20 Are the hoops sold? __________________ 67 short step 71 Custom

02-20-2012, 02:58 PM	#47
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 67 Chevy C-20 I'm waiting on a payment for them. Thanks, Ray

02-20-2012, 04:12 PM	#49
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 67 Chevy C-20 No luck on the arm, but I still have to go through my belts.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.