IN 1967 Chevy Bare Cab W/ Title Large Back Window and A/C - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Todd68Chevy** · 08-30-2012, 12:29 PM

Quote:

Originally Posted by Leroy-B1

Put me in line on dash and I have a box for shipping I could send to you then you mail back...lmk
Posted via Mobile Device

Quote:

Originally Posted by Leroy-B1

What's my shipping total zip is 28701 or Asheville NC greyhound.....I'm up I suppose
Posted via Mobile Device

Quote:

Originally Posted by Leroy-B1

Sorry to jump the gun...just moved and only internet I have is on my phone...easy to miss stuff...lmk if it gets to me
Posted via Mobile Device

Quote:

Originally Posted by Todd68Chevy

Looks like UPS shipping would only be $45.00 to NC

No problem, I will let you know but I want to give him a little more time to respond. Did you see that it is cut along the dash pad area and not along the windshield that I previously stated?

Thanks

I just received a PM from 67chevy1series and he is passing on the dash at this time. If you are still interested then it is yours. I have a box I can cut down or if you want to send me a box then I can recheck the shipping charges. If you want to check the shipping, I will be shipping from Zip 47882 and I am figuring it to weigh 12 pounds. Thanks

**Todd68Chevy** · 08-30-2012, 12:36 PM

Leroy-B1, I also wanted to make sure you noticed the dash has been cut along the dash pad area instead of the windshield, the dash is bent up / wavy around the ignition lock hole - needs straightened. So I dropped the price to $110.00 so that would make the shipped price $155.00 Thanks

Rochlow · 08-30-2012, 01:12 PM

Actually, I do need a patch. It's in the upper passenger windshield area. It's the part that is in the very corner to where the two pieces of metal over lap.

**Todd68Chevy** · 08-30-2012, 01:48 PM

Quote:

Originally Posted by Rochlow

Actually, I do need a patch. It's in the upper passenger windshield area. It's the part that is in the very corner to where the two pieces of metal over lap.

Do you mean the part pictured in the top picture of post 5? How big of an area do you need? do you have a picture? Thanks

Rochlow · 08-30-2012, 03:30 PM

Yes, Is it rusted through in that portion?

**Todd68Chevy** · 09-02-2012, 03:43 PM

Quote:

Originally Posted by Leroy-B1

Put me in line on dash and I have a box for shipping I could send to you then you mail back...lmk
Posted via Mobile Device

Quote:

Originally Posted by Leroy-B1

Sorry to jump the gun...just moved and only internet I have is on my phone...easy to miss stuff...lmk if it gets to me
Posted via Mobile Device

You are up. If you want it, it is yours, if you do not want it please let me know. Thanks

Quote:

Originally Posted by Rochlow

Actually, I do need a patch. It's in the upper passenger windshield area. It's the part that is in the very corner to where the two pieces of metal over lap.

Mine is rusted there also. I guess I just can not help you with anything. If you happen to be interested let me know. Thanks

Leroy-B1 · 09-02-2012, 04:15 PM

I'll take it pm me payment info
Posted via Mobile Device

**Todd68Chevy** · 09-02-2012, 04:43 PM

Quote:

Originally Posted by Leroy-B1

I'll take it pm me payment info
Posted via Mobile Device

PM sent, Thanks

**Todd68Chevy** · 09-03-2012, 09:38 AM

TTT

If the rain holds off I am going to start cutting today. Dash is pending sale to Leroy-B1, I am waiting to hear from Rochlow on the right upper windshield corner. Anybody else need anything????

Rochlow · 09-06-2012, 08:51 AM

Sorry for my late response.. I'm going to pass as mine is in the same condition. Looking for a patch to replace it.

Thanks for you time.

ryguy71 · 09-06-2012, 09:49 PM

i need the whole thing!!!

**Todd68Chevy** · 09-06-2012, 10:00 PM

Quote:

Originally Posted by ryguy71

i need the whole thing!!!

Buy it then. I will sell it to you with the dash cut out. To bad you are 8 hours away. I am actually come up to Kalamazoo next week and might be able to bring it up that far if you are interested. I am try to figure out if I can pull a trailer with my 68. It does still need work and is not a perfect cab.

Thanks, Todd

ryguy71 · 09-06-2012, 10:06 PM

My brother in-law lives in kzoo! how much???????$$$$$$$

**Todd68Chevy** · 09-06-2012, 10:21 PM

Quote:

Originally Posted by ryguy71

My brother in-law lives in kzoo! how much???????$$$$$$$

PM sent

**Todd68Chevy** · 09-07-2012, 07:45 PM

Quote:

Originally Posted by Leroy-B1

Put me in line on dash and I have a box for shipping I could send to you then you mail back...lmk
Posted via Mobile Device

Quote:

Originally Posted by Leroy-B1

I'll take it pm me payment info
Posted via Mobile Device

If you sent payment I have not received it yet. Let me know.

Quote:

Originally Posted by ryguy71

i need the whole thing!!!

Here are some more pictures of the floor. Did you look at all the pictures at the begining of the thread? The surface rust is from being out in the rain at a swap meet. I will call you this weekend.

**Todd68Chevy** · 09-07-2012, 07:49 PM

A few more pictures.

Leroy-B1 · 09-08-2012, 06:47 AM

Yes I'm going to take dash just not been home this week or near computer and phone won't do PayPal will get out as soon as I can
Posted via Mobile Device

**Todd68Chevy** · 09-08-2012, 06:54 AM

Quote:

Originally Posted by Leroy-B1

Yes I'm going to take dash just not been home this week or near computer and phone won't do PayPal will get out as soon as I can
Posted via Mobile Device

No problem, I had not heard from you and wanted to make sure that if you had mailed the money, you knew I had not received it yet. I have had stuff lost in the mail and did not want you to think I was holding your part. Just let me know when you send it so I can watch for it. Safe travels and have a good weekend.

**Todd68Chevy** · 09-10-2012, 08:46 AM

Quote:

Originally Posted by ryguy71

My brother in-law lives in kzoo! how much???????$$$$$$$

I have tried calling you 3 times over the weekend and left messages each time. If you are still interested in all or part of the cab let me know. I will need to load up tomorrow night if I am going to be bringing it with me. Thanks

**Todd68Chevy** · 09-21-2012, 01:41 PM

Cab has been cut up and the floor board area and firewall area are the only parts left available. Let me know if you need something.

Quote:

Originally Posted by Leroy-B1

I'll take it pm me payment info
Posted via Mobile Device

Quote:

Originally Posted by Leroy-B1

Yes I'm going to take dash just not been home this week or near computer and phone won't do PayPal will get out as soon as I can
Posted via Mobile Device

Quote:

Originally Posted by Todd68Chevy

No problem, I had not heard from you and wanted to make sure that if you had mailed the money, you knew I had not received it yet. I have had stuff lost in the mail and did not want you to think I was holding your part. Just let me know when you send it so I can watch for it. Safe travels and have a good weekend.

Leroy, It has been almost 2 more weeks and still contact or payment. Are you buying the dash or is it still for sale?? Let me know what is going on.

**Todd68Chevy** · 09-21-2012, 11:00 PM

Leroy-B1 has contacted me thru PM and the dash is still sold pending payment. Floor panels and firewall sections are still available.

ultrahd4me · 10-01-2012, 09:34 PM

Hey Todd,
Thanks for the reply. Yes I will take the drivers side floor panel for $25 shipped. I could use from the top of the low hump panel all the way to the cab mount or what ever you are willing to cut. Let me know. Thanks, Bobby

**Todd68Chevy** · 10-04-2012, 08:49 PM

Quote:

Originally Posted by ultrahd4me

Hey Todd,
Thanks for the reply. Yes I will take the drivers side floor panel for $25 shipped. I could use from the top of the low hump panel all the way to the cab mount or what ever you are willing to cut. Let me know. Thanks, Bobby

Here is pictures of what I have cut out. There is one spot that is cracked. It is in the floorboard above a brace and can not be seen from the bottom. PM sent.

ultrahd4me · 10-04-2012, 09:02 PM

That will work. Sending payment shortly.
Thanks

ultrahd4me · 10-04-2012, 09:11 PM

Payment sent. Thanks again Todd. Also let me know if you end up coming to Nashville to the swap meet.

08-30-2012, 12:36 PM	#27
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,977	Re: 1967 Chevy Bare Cab W/ Title Large Back Window and A/C Leroy-B1, I also wanted to make sure you noticed the dash has been cut along the dash pad area instead of the windshield, the dash is bent up / wavy around the ignition lock hole - needs straightened. So I dropped the price to $110.00 so that would make the shipped price $155.00 Thanks __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

08-30-2012, 01:12 PM	#28
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: 1967 Chevy Bare Cab W/ Title Large Back Window and A/C Actually, I do need a patch. It's in the upper passenger windshield area. It's the part that is in the very corner to where the two pieces of metal over lap.

08-30-2012, 03:30 PM	#30
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: 1967 Chevy Bare Cab W/ Title Large Back Window and A/C Yes, Is it rusted through in that portion?

09-02-2012, 04:15 PM	#32
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,994	Re: 1967 Chevy Bare Cab W/ Title Large Back Window and A/C I'll take it pm me payment info Posted via Mobile Device

09-03-2012, 09:38 AM	#34
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,977	Re: 1967 Chevy Bare Cab W/ Title Large Back Window and A/C TTT If the rain holds off I am going to start cutting today. Dash is pending sale to Leroy-B1, I am waiting to hear from Rochlow on the right upper windshield corner. Anybody else need anything???? __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

09-06-2012, 08:51 AM	#35
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: 1967 Chevy Bare Cab W/ Title Large Back Window and A/C Sorry for my late response.. I'm going to pass as mine is in the same condition. Looking for a patch to replace it. Thanks for you time.

09-06-2012, 09:49 PM	#36
ryguy71 Registered User Join Date: Sep 2012 Location: Grawn, MI Posts: 3	Re: 1967 Chevy Bare Cab W/ Title Large Back Window and A/C i need the whole thing!!!

09-06-2012, 10:06 PM	#38
ryguy71 Registered User Join Date: Sep 2012 Location: Grawn, MI Posts: 3	Re: 1967 Chevy Bare Cab W/ Title Large Back Window and A/C My brother in-law lives in kzoo! how much???????$$$$$$$

09-07-2012, 07:49 PM	#41
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,977	Re: 1967 Chevy Bare Cab W/ Title Large Back Window and A/C A few more pictures. Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

09-08-2012, 06:47 AM	#42
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,994	Re: 1967 Chevy Bare Cab W/ Title Large Back Window and A/C Yes I'm going to take dash just not been home this week or near computer and phone won't do PayPal will get out as soon as I can Posted via Mobile Device

09-21-2012, 11:00 PM	#46
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,977	Re: 1967 Chevy Bare Cab W/ Title Large Back Window and A/C Leroy-B1 has contacted me thru PM and the dash is still sold pending payment. Floor panels and firewall sections are still available. __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

10-01-2012, 09:34 PM	#47
ultrahd4me Registered User Join Date: Dec 2006 Location: Gallatin, Tn Posts: 676	Re: 1967 Chevy Bare Cab W/ Title Large Back Window and A/C Hey Todd, Thanks for the reply. Yes I will take the drivers side floor panel for $25 shipped. I could use from the top of the low hump panel all the way to the cab mount or what ever you are willing to cut. Let me know. Thanks, Bobby Attached Images

10-04-2012, 09:02 PM	#49
ultrahd4me Registered User Join Date: Dec 2006 Location: Gallatin, Tn Posts: 676	Re: 1967 Chevy Bare Cab W/ Title Large Back Window and A/C That will work. Sending payment shortly. Thanks

10-04-2012, 09:11 PM	#50
ultrahd4me Registered User Join Date: Dec 2006 Location: Gallatin, Tn Posts: 676	Re: 1967 Chevy Bare Cab W/ Title Large Back Window and A/C Payment sent. Thanks again Todd. Also let me know if you end up coming to Nashville to the swap meet.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.