OR Parting out 72 Suburban C10 402 TH400

[4xshort]

Hi Tom, I'll take the 4x4 at lincage, the at 4x4 high hump, the very rear crossmember from 4x4, I'll measure the frame horn and get back to you, I dont know what dipstick I want, can I see picks its for a sb 4x4. I would also like the rear spring hangers. I'll take the horn button, windshield washer pump/motor, the radio patch, do you have the harness for the dual horns, a nice non a/c heater control? I'm interested in the tilt column, exhaust manifolds and would like to know what shipping on the fan shroud before I commit Thanks I am in no rush what so ever. Josh

[c1069]

Hi Tom

You can add more pictures from sun visors?

[c1069]

Door panels? are for sale too

[tll74]

Originally Posted by mosesburb

How much for all of the lower trim to 85053??

The four pieces priced..11.00. If you want the RH rear door piece add 7.00 and I'll include it. It has a few dings as I recall. Thanks, Tom

Originally Posted by So.Cal.Chevy

After giving it some thought, i will pass on the parts i stated. Thanks you though.

No problem.

Originally Posted by capev86

That's a bummer that another special edition Suburban bites the dust. My dad had almost the same truck back in the 80's (small block and cab lights were the only difference).

Parts I definitely want:

Tripod Mirrors
Upper gate supports
All 4 tailgate hinges
Dual exhaust hanger set

Also curious about the seat upholstery and headliner....

Seat upholstery and headliner was junk. Yea it's to bad that it is gone. It was very ruff and rusted out. BUT it will put a smile on many trucks. Thanks, Tom

Originally Posted by 4xshort

Hi Tom, I'll take the 4x4 at lincage, the at 4x4 high hump, the very rear crossmember from 4x4, I'll measure the frame horn and get back to you, I dont know what dipstick I want, can I see picks its for a sb 4x4. I would also like the rear spring hangers. I'll take the horn button, windshield washer pump/motor, the radio patch, do you have the harness for the dual horns, a nice non a/c heater control? I'm interested in the tilt column, exhaust manifolds and would like to know what shipping on the fan shroud before I commit Thanks I am in no rush what so ever. Josh

Josh, 8.00 on the green dual horn harness, 40.00 on a nice 67-72 heater control, 300.00 on tilt, and 75.00 on pair of 4x4 exhaust manifolds. I need your postal zip code for shipping cost on shroud. Thanks, Tom

Originally Posted by c1069

Hi Tom

You can add more pictures from sun visors?

Yes I can but it will be monday evening. The front door panels are junk. I did save the rears but they have the normal parchment disease. Useable as a last resort type thing. I'll sell them for the value of the deluxe stainless trim. 25.00. If intersted i can sent pics. Thanks, Tom

[capev86]

Tripod Mirrors
Upper gate supports
All 4 tailgate hinges
Dual exhaust hanger set

I was thinking $250 shipped if you are willing to make me a package deal. I have paypal standing by. -Chris

[4xshort]

Hi Tom, I'll take the heater control if its not black and doesnt have 4 bolts through the face, I'll also take the dual horn setup "two horns, brackets, hardware and harness"
PM sent about payment information, Thanks Josh

[tll74]

Originally Posted by capev86

Tripod Mirrors
Upper gate supports
All 4 tailgate hinges
Dual exhaust hanger set

I was thinking $250 shipped if you are willing to make me a package deal. I have paypal standing by. -Chris

Chris, That sounds fine. PM sent

Originally Posted by 4xshort

Hi Tom, I'll take the heater control if its not black and doesnt have 4 bolts through the face, I'll also take the dual horn setup "two horns, brackets, hardware and harness"
PM sent about payment information, Thanks Josh

Josh, PM returned

[niterider65]

Hi do you still have the horns if so what would it cost shipped to 76034

[tll74]

Originally Posted by budnikguy

Definitely a buyer for locks (doors, ignition, and hatch)...and edge guards for all 3 doors! Very interested in discussing the body/tub, could you please PM me so we could discuss. Thanks

Adam

Adam, 48.00 shipped on the door locks, ign cylinder, and hatch cylinder assy with all matching keys.

Originally Posted by rockc

Will take rear LH and RH inside panel trim.
And spare tire retainer nut, bolt and plate
Shipped to 82210

17.15 shipping on the panels, spare wing nut, retainer plate, and nut.

Originally Posted by niterider65

Hi do you still have the horns if so what would it cost shipped to 76034

The horns are spoken for on this truck but the other 72 Sub C10 has them. 30.00 for the horns with the green jumper wire. 7.00 shipping.

[rockc]

I will take, how and where do you want payment?
Thanks
Rock C

[tll74]

Visor pics for c1069

[gcburdic]

if the door edge guards are available...I'll take them if they are in good shape....shipping to 28031....thanks

[budnikguy]

I will take them, does that include the door edge guards for all 3 doors also (had noted those in previous post also)? PM me with payment info, PayPal is ready!

Thanks
Adam

Originally Posted by tll74

Adam, 48.00 shipped on the door locks, ign cylinder, and hatch cylinder assy with all matching keys.

17.15 shipping on the panels, spare wing nut, retainer plate, and nut.


The horns are spoken for on this truck but the other 72 Sub C10 has them. 30.00 for the horns with the green jumper wire. 7.00 shipping.

Posted via Mobile Device

[tll74]

Originally Posted by gcburdic

if the door edge guards are available...I'll take them if they are in good shape....shipping to 28031....thanks

I'll put you next in line. Adam had asked about them in a earlier post which I have now just realized. Well see what he decides. I have more nice ones if he wants them.

Originally Posted by budnikguy

I will take them, does that include the door edge guards for all 3 doors also (had noted those in previous post also)? PM me with payment info, PayPal is ready!
Posted via Mobile Device

Adam, sorry I was so focused on making sure I had second set of locks for my truck that I overlooked your request on the gaurds. Do to the over sight I will do them for 15.00 and pick up any extra frieght cost. I some how missed getting them onto the parts list. They are not perfect but in nice condition.

Thanks, Tom

[gcburdic]

Originally Posted by tll74

I'll put you next in line. Adam had asked about them in a earlier post which I have now just realized. Well see what he decides. I have more nice ones if he wants them.
Thanks, Tom

Yes sir, I saw Adam had mentioned he wanted them, so completely understand, but if you have anymore nice ones, I'd be interested in those if Adam passes...Thanks Geoff

[c1069]

Originally Posted by tll74

Visor pics for c1069

How much will be for them?
Posted via Mobile Device

[72blazr]

Would you sell just the parchment seat belts for the rear. I dont need the retractors. What is all there in post eleven pic four. I may need all but the retractors in that pic. Let me know what you got and price shipped to 77511. Thanks

[tll74]

Originally Posted by gcburdic

Yes sir, I saw Adam had mentioned he wanted them, so completely understand, but if you have anymore nice ones, I'd be interested in those if Adam passes...Thanks Geoff

Geoff, I'll check my others and get back to you.

Originally Posted by c1069

How much will be for them?
Posted via Mobile Device

40.00 for the pair and lets say 11.00 USPS shipping

Originally Posted by 72blazr

Would you sell just the parchment seat belts for the rear. I dont need the retractors. What is all there in post eleven pic four. I may need all but the retractors in that pic. Let me know what you got and price shipped to 77511. Thanks

This Sub only came with the front seat. So, these are a 3 pass set for the front seat. They should fit in a flat rate box $11.35
Priority Mail®
Medium Flat Rate Box
13-5/8" x 11-7/8" x 3-3/8"
11" x 8-1/2" x 5-1/2

[72blazr]

Can you give me a total shipped for the set without the retractors?

[old Chevy guy]

You said you have the three trucks to part,any good inner fender wells? Didn't see them listed.LMK. Thanks

[c1069]

Originally Posted by tll74

Geoff, I'll check my others and get back to you.

40.00 for the pair and lets say 11.00 USPS shipping

Thanks but i'm going to pass. I'm working in a very good deal for NOS mirrors with a local guy.
Thanks again

[tll74]

Originally Posted by 72blazr

Can you give me a total shipped for the set without the retractors?

I would like to keep the set all together for now. Sorry

Originally Posted by old Chevy guy

You said you have the three trucks to part,any good inner fender wells? Didn't see them listed.LMK. Thanks

The third one may have good liners. I'm now on the second Sub K10, the RH is junk and not sure on the LH. Once the second it is done I'll do the third. These are really hard to tell how good they are till pulled.

Originally Posted by c1069

Thanks but i'm going to pass. I'm working in a very good deal for NOS mirrors with a local guy.
Thanks again

No problem, they'll sell.


Thanks, Tom

[tll74]

Pics of the other two upcoming Sub's to be parted. Each one will have it's own thread once they are dismantled. I'm currrently working on the K10.

[tll74]

pics of the third Sub.

[budnikguy]

I will take a nice set of 3....and have funds ready for all items....but may be best to wait a bit as you part out the other white 72 'burb Or I can pay you now for these items and have you hang onto them until we get to the next burb..LMK

Adam

Originally Posted by tll74

I'll put you next in line. Adam had asked about them in a earlier post which I have now just realized. Well see what he decides. I have more nice ones if he wants them.


Adam, sorry I was so focused on making sure I had second set of locks for my truck that I overlooked your request on the gaurds. Do to the over sight I will do them for 15.00 and pick up any extra frieght cost. I some how missed getting them onto the parts list. They are not perfect but in nice condition.

Thanks, Tom