KY parting out 68 c10

[bigjoe77]

Originally Posted by oldblue1968chevy

Any suspension stuff that fits 71 72 chevy (balljoints etc interested..)

what brand are the rear drop springs

The only thing I have suspension related that would fit a 71-72 Chevy would be the trailing arms/rear control arms. I listed them, but haven't taken a picture of them yet. I do have a used set of "drop shocks", which are necessary for lowered trucks, but I haven't taken pics of those yet either. To be honest with you I'm not sure what brand the springs are. I bought them off of a guy a while back and never asked. If I think of or find anything else I will let you know. Thanks for inquiring.

[bigjoe77]

Originally Posted by zicc1835

Ok thanks
Jz
Posted via Mobile Device

No problem

[kedmunds]

I would like to be Next in Line for the Drop Spindles, all 4 lowering springs, and some of the remaining front end parts. Please contact me if they are all still available. Thank you

[bigjoe77]

Originally Posted by kedmunds

I would like to be Next in Line for the Drop Spindles, all 4 lowering springs, and some of the remaining front end parts. Please contact me if they are all still available. Thank you

The drop spindles are still available for sure. The springs are pending. I have the lower ball joints, upper control arm assemblies, an outer tie rod end, the control arm u-bolts, rear trailing arms, etc.

[54belair]

I didnt see it in your list, but, Im in the market for a rust free DRIVERS side inner fender.

[bigjoe77]

Originally Posted by 54belair

I didnt see it in your list, but, Im in the market for a rust free DRIVERS side inner fender.

Sorry man, don't have one of those.

[Hard_Rain420]

Is the floor of the cab patched or all original? Looks great! Is it possable to cut out the floor from the top of the vent panels to the rockers?

I have rot along the front floor seam, bottom of the vent panels and rocker areas.

Rich

[bigjoe77]

I'm not sure, but I think it has been patched, but with the proper replacement parts b/c it looks really good. I would rather not hack it up.

[bigjoe77]

Originally Posted by kedmunds

I would like to be Next in Line for the Drop Spindles, all 4 lowering springs, and some of the remaining front end parts. Please contact me if they are all still available. Thank you

Springs are still available as well
Posted via Mobile Device

[Rochlow]

Would you do $70 shipped to 05478 on the rockers and cab corners?

[bigjoe77]

Originally Posted by Rochlow

Would you do $70 shipped to 05478 on the rockers and cab corners?

I'll do it for $82

[Rochlow]

I'll pass. Thanks
Posted via Mobile Device

[bigjoe77]

ttt

[bigjoe77]

22. Trailing Arms/Rear Control Arms - listed earlier, but now have pics. $150 for the pair.
23. Passenger Inner Fender - I'm pretty sure this is an aftermarket part. I sanded it down, primed the outside, painted the inside with the Rustoleum oil-based brush on stuff. No rust. $40
24. Original GM Glove Box Door - door only $30 w/ hinge $50
25. NOS Pedal Pad Kit - $10
26. NOS Ignition Switch Emblem - $2
27. NOS Headlight Adjuster Spring (2) (67-68 only) - $5 for both
28. NOS Headlight Adjuster Assembly (4) - SOLD
29. NOS Front Fender Hardware Kit (2) - SOLD
30. NOS GM Ignition Switch Bezel (68-72 only) - SOLD
31. NOS GM Lower Core Mount Cushion - SOLD
32. NOS GM Upper Core Mount Cushion (2) - SOLD
33. NOS Carriage Bolts and Nuts for Core Support (2) - SOLD
34. NOS Front Bumper Bolt Kit - $15
35. NOS Rear Bumper Bolt Kit - $10
36. NOS Front Hood Bumper (2) - SOLD
37. NOS GM Door Sill Set w/screws (2) - SOLD
38. Original Headlight Bezel Set - slight rust on backside of each - $20 for both
39. Original Driver's Side Mirror - $5
40. RH and LH Parking Light Assemblies - lens are in OK shape - $15 for the set
41. Original Pedal Pad - no cracks - $5
42. Rear U-Bolts - no rust - $20 for both
43. 67-71 Metal Front Door Panel Set - I have both, just haven't taken the other off of the truck yet. Some rust on the backside. - $20 PENDING

More to post later

[bigjoe77]

..

[bigjoe77]

...

[bigjoe77]

....

[2-68chevyguy]

Id like to have the spindles and front and rear springs do u still have them ??? whats it take to ship to 25557 let me know or i might be able to drive over and get them, thanks

[J-Rod67]

Looking for V8 engine mount towers if you have a set.

[bigjoe77]

Originally Posted by 2-68chevyguy

Id like to have the spindles and front and rear springs do u still have them ??? whats it take to ship to 25557 let me know or i might be able to drive over and get them, thanks

PM sent

[bigjoe77]

Originally Posted by J-Rod67

Looking for V8 engine mount towers if you have a set.

If I could get rid of the engine I might!

[Maddoxdb]

I'll take #30 and #36 pending pics of door sill plates. Thanks, Dustin
Posted via Mobile Device

[jeffg1010]

Ever go to WV or NC?
I'd be interested in 25, 26, 27, 28, 29, 30, 34, 35 (both 35's) Of that list... What do u still have left?
With shipping... To 28115.
Posted via Mobile Device

[bigjoe77]

Originally Posted by Maddoxdb

I'll take #30 and #36 pending pics of door sill plates. Thanks, Dustin
Posted via Mobile Device

OK, let me see what I can do as far as shipping too. What is the zip?

[bigjoe77]

Spindles and springs are pending...