CA 1973 Chevy K20 and K5 Part Out - Corona, CA - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**argonaut** · 11-12-2012, 05:32 PM

Jdubs,
I can measure tonight when I get home, but I'm 100% they'll work as I pulled them off the truck myself. In fact I still have the axles sitting at home!

Jdubs71 · 11-12-2012, 06:19 PM

Yeah I'm sure they will work also. Bought a set from another member that are for a 3/4 or one ton axle housing. My axles are from a 74 1/2 ton.
Posted via Mobile Device

**argonaut** · 11-13-2012, 12:24 PM

Jdubs,
All measurements are between the holes, to match the way the u-bolts are measured. The fronts measure ~2-3/4" for the tube diameter areas and ~3-1/2" for the center housing end. The rears are ~3".

This matches what I have on my 3/4 ton 73 Dana 44. The 1/2 and 3/4 ton should be the same. The 1 ton Dana 60 uses larger plates and actually bolts into the center housing end, rather than using a bigger u-bolt.

Also a piece of advice, most front u-bolt kits that I found during my build include a 3-5/8" u-bolt for the front. I found that this was actually slightly too big and that a 3-1/2" worked better, perfect in fact. I've use both sizes, both will work, but I prefer the 3-1/2". I bought just that one u-bolt from autozone and it was pretty cheap. Maybe yours will work out differently, but this is my experience.

Jdubs71 · 11-13-2012, 05:44 PM

I'll take them. Sending payment
Posted via Mobile Device

**argonaut** · 11-13-2012, 06:25 PM

I'll see if I can get the in the mail today.

DirtRocket8x · 11-15-2012, 11:12 PM

Will u sell the front spring hanger/ core support bracket
Posted via Mobile Device

6ty8 · 11-16-2012, 01:19 PM

can you send me pix of the all the 6 lug wheels you have available

Omar999 · 11-16-2012, 03:27 PM

can you send me pictures of the blue bench seat please ..

bakhasoa@yahoo.com

thanks

**argonaut** · 11-21-2012, 01:03 AM

Sorry for the late reply guys, work has been keeping me busy.

DirtRocket,
I do have the front spring hangers + core supports and will gladly sell them to you. Do you need the rear shackle hangers too?

6ty8 and Omar,
I'll snap a few new pics tomorrow and post them up.

DirtRocket8x · 11-21-2012, 01:07 AM

I only need the front bracket because someone cut mine apart and added a 3 inch block in them. How much do u waunt 4 them shipped to 75042 garland Texas
Posted via Mobile Device

**argonaut** · 12-06-2012, 07:28 PM

DirtRocket,
Sorry it took so long. If you still want the brackets they are $45 shipped.

**argonaut** · 12-06-2012, 07:38 PM

Omar999,
I sent a whole bunch of photos of the seat to your email account.

6ty8 · 12-07-2012, 12:22 PM

can you send me pics of the wheels to ignaciogrr@gmail.com

moregrip · 12-07-2012, 02:41 PM

got any pics of the tailgate brother? thanks!

glimmertwin01 · 12-31-2012, 06:22 PM

I could use the cover for the Fuel neck that screws into the floor and the inside panel in a K5 blazer...can you help? if so shoot me a PM..i need 2 but one will suffice as im not greedy

benoit454 · 12-31-2012, 09:58 PM

how much for the flat top knuckles only shipped?

**argonaut** · 01-06-2013, 10:43 PM

No fuel neck.

Flat top knuckles are already gone.

Sorry guys!

79Betty · 01-06-2013, 11:35 PM

Still have the clutch assembly? I'm needin the rods and bellhousin'.
Posted via Mobile Device

blue_69 · 02-02-2013, 04:14 PM

if you still have the clutch pedal assy. how much shipped to 13032

thanks, jason

HamiltonLJ · 03-14-2013, 09:41 AM

I need a th350 to np205 adapter
Posted via Mobile Device

rs72z · 03-22-2013, 02:38 PM

Do you have a hood latch support for the 73?
Thanks

11-12-2012, 05:32 PM	#26
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: 1973 Chevy K20 and K5 Part Out - Corona, CA Jdubs, I can measure tonight when I get home, but I'm 100% they'll work as I pulled them off the truck myself. In fact I still have the axles sitting at home! __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

11-12-2012, 06:19 PM	#27
Jdubs71 Registered User Join Date: May 2012 Location: Sanger, CA Posts: 415	Re: 1973 Chevy K20 and K5 Part Out - Corona, CA Yeah I'm sure they will work also. Bought a set from another member that are for a 3/4 or one ton axle housing. My axles are from a 74 1/2 ton. Posted via Mobile Device

11-13-2012, 12:24 PM	#28
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: 1973 Chevy K20 and K5 Part Out - Corona, CA Jdubs, All measurements are between the holes, to match the way the u-bolts are measured. The fronts measure ~2-3/4" for the tube diameter areas and ~3-1/2" for the center housing end. The rears are ~3". This matches what I have on my 3/4 ton 73 Dana 44. The 1/2 and 3/4 ton should be the same. The 1 ton Dana 60 uses larger plates and actually bolts into the center housing end, rather than using a bigger u-bolt. Also a piece of advice, most front u-bolt kits that I found during my build include a 3-5/8" u-bolt for the front. I found that this was actually slightly too big and that a 3-1/2" worked better, perfect in fact. I've use both sizes, both will work, but I prefer the 3-1/2". I bought just that one u-bolt from autozone and it was pretty cheap. Maybe yours will work out differently, but this is my experience. __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

11-13-2012, 05:44 PM	#29
Jdubs71 Registered User Join Date: May 2012 Location: Sanger, CA Posts: 415	Re: 1973 Chevy K20 and K5 Part Out - Corona, CA I'll take them. Sending payment Posted via Mobile Device

11-13-2012, 06:25 PM	#30
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: 1973 Chevy K20 and K5 Part Out - Corona, CA I'll see if I can get the in the mail today. __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

11-15-2012, 11:12 PM	#31
DirtRocket8x Registered User Join Date: Dec 2011 Location: Union valley texas Posts: 75	Re: 1973 Chevy K20 and K5 Part Out - Corona, CA Will u sell the front spring hanger/ core support bracket Posted via Mobile Device

11-16-2012, 01:19 PM	#32
6ty8 Registered User Join Date: Mar 2009 Location: San Fernando, CA Posts: 90	Re: 1973 Chevy K20 and K5 Part Out - Corona, CA can you send me pix of the all the 6 lug wheels you have available

11-16-2012, 03:27 PM	#33
Omar999 Registered User Join Date: Feb 2011 Location: OH.44202 Posts: 213	Re: 1973 Chevy K20 and K5 Part Out - Corona, CA can you send me pictures of the blue bench seat please .. bakhasoa@yahoo.com thanks

11-21-2012, 01:03 AM	#34
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: 1973 Chevy K20 and K5 Part Out - Corona, CA Sorry for the late reply guys, work has been keeping me busy. DirtRocket, I do have the front spring hangers + core supports and will gladly sell them to you. Do you need the rear shackle hangers too? 6ty8 and Omar, I'll snap a few new pics tomorrow and post them up. __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

11-21-2012, 01:07 AM	#35
DirtRocket8x Registered User Join Date: Dec 2011 Location: Union valley texas Posts: 75	Re: 1973 Chevy K20 and K5 Part Out - Corona, CA I only need the front bracket because someone cut mine apart and added a 3 inch block in them. How much do u waunt 4 them shipped to 75042 garland Texas Posted via Mobile Device

12-06-2012, 07:28 PM	#36
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: 1973 Chevy K20 and K5 Part Out - Corona, CA DirtRocket, Sorry it took so long. If you still want the brackets they are $45 shipped. __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

12-06-2012, 07:38 PM	#37
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: 1973 Chevy K20 and K5 Part Out - Corona, CA Omar999, I sent a whole bunch of photos of the seat to your email account. __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

12-07-2012, 12:22 PM	#38
6ty8 Registered User Join Date: Mar 2009 Location: San Fernando, CA Posts: 90	Re: 1973 Chevy K20 and K5 Part Out - Corona, CA can you send me pics of the wheels to ignaciogrr@gmail.com

12-07-2012, 02:41 PM	#39
moregrip Registered User Join Date: Dec 2008 Location: Las Vegas, NV Posts: 810	Re: 1973 Chevy K20 and K5 Part Out - Corona, CA got any pics of the tailgate brother? thanks!

12-31-2012, 06:22 PM	#40
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: 1973 Chevy K20 and K5 Part Out - Corona, CA I could use the cover for the Fuel neck that screws into the floor and the inside panel in a K5 blazer...can you help? if so shoot me a PM..i need 2 but one will suffice as im not greedy __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style



Register or Log In To remove these advertisements.

12-31-2012, 09:58 PM	#41
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	Re: 1973 Chevy K20 and K5 Part Out - Corona, CA how much for the flat top knuckles only shipped? __________________ Chris GIT R DONE!!!!!! Check out all our rides, http://www.cardomain.com/id/benwa454

01-06-2013, 10:43 PM	#42
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: 1973 Chevy K20 and K5 Part Out - Corona, CA No fuel neck. Flat top knuckles are already gone. Sorry guys! __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

01-06-2013, 11:35 PM	#43
79Betty Registered User Join Date: Jan 2013 Location: Jasper, IN Posts: 948	Re: 1973 Chevy K20 and K5 Part Out - Corona, CA Still have the clutch assembly? I'm needin the rods and bellhousin'. Posted via Mobile Device

02-02-2013, 04:14 PM	#44
blue_69 someday Join Date: Dec 2001 Location: canastota,new york Posts: 629	Re: 1973 Chevy K20 and K5 Part Out - Corona, CA if you still have the clutch pedal assy. how much shipped to 13032 thanks, jason __________________ Click Here to search ebay for all 67-72 parts My 72 CST blazer build 72 CST Blazer 4x4 67 2wd swb ( project onion crate ) 86 4x4 lwb plow truck 40 x 60 foot barn to work on all this stuff

03-14-2013, 09:41 AM	#45
HamiltonLJ Registered User Join Date: Mar 2013 Location: Mercer County N.J. Posts: 8	Re: 1973 Chevy K20 and K5 Part Out - Corona, CA I need a th350 to np205 adapter Posted via Mobile Device

03-22-2013, 02:38 PM	#46
rs72z Registered User Join Date: Oct 2011 Location: Emory TX Posts: 900	Re: 1973 Chevy K20 and K5 Part Out - Corona, CA Do you have a hood latch support for the 73? Thanks __________________ ___________________ 78 ccsb dually 5.3 4l60e http://67-72chevytrucks.com/vboard/s...d.php?t=491551

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.