KS Now a 71 C20 chevy with tilt - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 11-04-2012, 09:44 PM

Chuck, I'd have to look, most of them have oil on them though, I've sold most the rag joints off them. I will look Mon. Thanks Randy

**jocko** · 11-04-2012, 09:50 PM

Quote:

Originally Posted by teeitup

Mark, I haven't looked at it real close, I will Mon after work and get better pics. I think its off a 73-up though. Thanks Randy

No worries Randy - if you get a chance to look at it, pls scribble down the part number and I can verify from there. If indeed a 73+, I'll probably pass - but if PN is 71, I'm very interested. Thanks and no rush at all. Take care.

**DeadheadNM** · 11-04-2012, 09:58 PM

Quote:

Originally Posted by teeitup

Pete, this would be all you'd need to put it in the K20 but I need to see if I can get a new cable put on it. Sorry no camper harness on it. Thanks Randy

Interested then if you have another cable. Any special manifold/carb bracket I need? I'll check back here but if you can shoot me a PM if you have the cable and I'll follow up with a reply here on the post. Thanks Randy, Pete

**29od1** · 11-04-2012, 10:00 PM

Hi Randy,

Are those eagle fenders for sale or did someone already buy them?

David

teeitup · 11-05-2012, 01:42 AM

Pete, I will try to find out on cable. It doesn't go outside cab, it mounts to gas pedal

David, those are them, long story, anyway they are for sale, pass side has some rust in front cup area. They both have 2 small holes on topside near rear where they had CB antennas mounted. $125 for pair.

Thanks Randy

sduckworth13 · 11-05-2012, 03:00 AM

Randy, how much for the wing windows?

sduckworth13 · 11-05-2012, 03:03 AM

looks like someone has said they'll take them, maybe next time.

jjzepplin · 11-05-2012, 06:30 AM

There Are 2 sizes for the rag joints. Do you have a large one?

teeitup · 11-05-2012, 09:01 AM

Scott, I will let you know if he passes

jjzepplin, I never knew there were 2 sizes, I will look and see if I have one. I only have 4-5 with ragjoints on them

Thanks Randyl

jjzepplin · 11-05-2012, 09:07 AM

Yup! I have two small ones and need a big. I took the one off my 72 and it fit. My 70 did not.

teeitup · 11-05-2012, 07:56 PM

Mark, here is pic of carb

teeitup · 11-05-2012, 07:57 PM

Chuck, I looked at them all, sorry no dry ones. Thanks Randy

**Cash3481** · 11-05-2012, 09:05 PM

Quote:

Originally Posted by teeitup

Mike, next set I get are yours, I'm going to look a BB truck this week, I'll let you know if I get it. Thanks Randy

Randy,
Ran into someone with the 68-71 towers and 4-5 lug rallies for a great deal today. Thanks for promising them to me. I owe you again for thinking of me.
We need to square up and tell some lies one of these weekends. I also will pick up Dave's bumper for my parents to help deliver it to Indiana when they come visit. 1st round is on me!
Mike
Posted via Mobile Device

67-72trucks · 11-06-2012, 02:15 PM

Payment sent for Dash. Thanks!

bronze 72 super · 11-06-2012, 10:42 PM

Hey Randy, is that tilt still available ? Shipping to 97050, does the wheel come with it? Please let me know. Thanks, Mike.

teeitup · 11-06-2012, 11:16 PM

67-72trucks, Mike, I will let you know when I get the money

bronze 72 super, Mike, its still available, no steering wheel. $250 shipped

Thanks Randy

67-72trucks · 11-06-2012, 11:23 PM

Thanks appreciate it

bronze 72 super · 11-07-2012, 01:40 AM

Randy, I'll take it. I'll be stopping by the bank tomorrow to get money and money order. Please be sure to include the cancelling cam, spring and steering wheel retaining nut. Thanks, Mike.

teeitup · 11-07-2012, 01:54 PM

PM'd you Mike about tilt. Thanks Randy

71 super · 11-07-2012, 11:57 PM

Randy I am going to pass on vents and glass. I found a set I had put back here and got lost in the shuffle of the move last year. Thank you, Harold
Posted via Mobile Device

bronze 72 super · 11-08-2012, 01:44 AM

Randy, payment on it's way for the tilt. Mike. Pm'd you.

ls1nova71 · 11-08-2012, 05:11 AM

How much for the glove box door? Never seen a 2wd with tow hooks, guessing they were already gone?
Posted via Mobile Device

teeitup · 11-08-2012, 09:04 AM

Harold, no problem at all

Mike, sounds good I'll let you know when it gets here

Eric, that is strange, its has the extra lock put in it. I'll send it for you for checking out that truck for me, see me your addy again.

Thanks Randy

Slinger60 · 11-08-2012, 10:36 AM

I will take the oil pressure line. Also wondering if you have a set of the push switches that are on the inside of the door jam that turn on the courtesy lights. Price shipped to 96062 Thanks Shawn

**DeadheadNM** · 11-09-2012, 08:17 PM

Randy any luck on the throttle cable? Thanks - Pete

11-04-2012, 09:44 PM	#26
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Now a 71 C20 chevy with tilt Chuck, I'd have to look, most of them have oil on them though, I've sold most the rag joints off them. I will look Mon. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-04-2012, 10:00 PM	#29
29od1 Registered User Join Date: Oct 2006 Location: Wichita, Kansas Posts: 1,050	Re: Now a 71 C20 chevy with tilt Hi Randy, Are those eagle fenders for sale or did someone already buy them? David

11-05-2012, 01:42 AM	#30
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Now a 71 C20 chevy with tilt Pete, I will try to find out on cable. It doesn't go outside cab, it mounts to gas pedal David, those are them, long story, anyway they are for sale, pass side has some rust in front cup area. They both have 2 small holes on topside near rear where they had CB antennas mounted. $125 for pair. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-05-2012, 03:00 AM	#31
sduckworth13 Registered User Join Date: Mar 2011 Location: Kansas City, Missouri Posts: 3,541	Re: Now a 71 C20 chevy with tilt Randy, how much for the wing windows? __________________ Scott

11-05-2012, 03:03 AM	#32
sduckworth13 Registered User Join Date: Mar 2011 Location: Kansas City, Missouri Posts: 3,541	Re: Now a 71 C20 chevy with tilt looks like someone has said they'll take them, maybe next time. __________________ Scott

11-05-2012, 06:30 AM	#33
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,566	Re: Now a 71 C20 chevy with tilt There Are 2 sizes for the rag joints. Do you have a large one? __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

11-05-2012, 09:01 AM	#34
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Now a 71 C20 chevy with tilt Scott, I will let you know if he passes jjzepplin, I never knew there were 2 sizes, I will look and see if I have one. I only have 4-5 with ragjoints on them Thanks Randyl __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-05-2012, 09:07 AM	#35
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,566	Re: Now a 71 C20 chevy with tilt Yup! I have two small ones and need a big. I took the one off my 72 and it fit. My 70 did not. __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

11-05-2012, 07:56 PM	#36
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Now a 71 C20 chevy with tilt Mark, here is pic of carb Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-05-2012, 07:57 PM	#37
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Now a 71 C20 chevy with tilt Chuck, I looked at them all, sorry no dry ones. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-06-2012, 02:15 PM	#39
67-72trucks Registered User Join Date: Jun 2006 Location: Michigan Posts: 530	Re: Now a 71 C20 chevy with tilt Payment sent for Dash. Thanks!

11-06-2012, 10:42 PM	#40
bronze 72 super Registered User Join Date: Sep 2007 Location: Rufus Oregon Posts: 1,186	Re: Now a 71 C20 chevy with tilt Hey Randy, is that tilt still available ? Shipping to 97050, does the wheel come with it? Please let me know. Thanks, Mike.

11-06-2012, 11:16 PM	#41
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Now a 71 C20 chevy with tilt 67-72trucks, Mike, I will let you know when I get the money bronze 72 super, Mike, its still available, no steering wheel. $250 shipped Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-06-2012, 11:23 PM	#42
67-72trucks Registered User Join Date: Jun 2006 Location: Michigan Posts: 530	Re: Now a 71 C20 chevy with tilt Thanks appreciate it

11-07-2012, 01:40 AM	#43
bronze 72 super Registered User Join Date: Sep 2007 Location: Rufus Oregon Posts: 1,186	Re: Now a 71 C20 chevy with tilt Randy, I'll take it. I'll be stopping by the bank tomorrow to get money and money order. Please be sure to include the cancelling cam, spring and steering wheel retaining nut. Thanks, Mike.



Register or Log In To remove these advertisements.

11-07-2012, 01:54 PM	#44
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Now a 71 C20 chevy with tilt PM'd you Mike about tilt. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-07-2012, 11:57 PM	#45
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,080	Re: Now a 71 C20 chevy with tilt Randy I am going to pass on vents and glass. I found a set I had put back here and got lost in the shuffle of the move last year. Thank you, Harold Posted via Mobile Device __________________ 67 blue step side- bb 68 gold and white swb cst anniversary 68 custom swb hot rod Ls swap 69 swb cst 6 cylinder/ overdrive 69 black/black cst bb swb 70 orange and white cst Canada built truck swb bb 71 black and white super swb bb 71 red and white super swb 72 green and white super swb 4x4 62 nova wagon 400 series Ls swapped 68 Camaro 327/4 speed- 1 owner, original paint 66 Volkswagen bettle 69 auto stick Volkswagen Beetle

11-08-2012, 01:44 AM	#46
bronze 72 super Registered User Join Date: Sep 2007 Location: Rufus Oregon Posts: 1,186	Re: Now a 71 C20 chevy with tilt Randy, payment on it's way for the tilt. Mike. Pm'd you.

11-08-2012, 05:11 AM	#47
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,119	Re: Now a 71 C20 chevy with tilt How much for the glove box door? Never seen a 2wd with tow hooks, guessing they were already gone? Posted via Mobile Device __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

11-08-2012, 09:04 AM	#48
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Now a 71 C20 chevy with tilt Harold, no problem at all Mike, sounds good I'll let you know when it gets here Eric, that is strange, its has the extra lock put in it. I'll send it for you for checking out that truck for me, see me your addy again. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-08-2012, 10:36 AM	#49
Slinger60 Registered User Join Date: Jul 2011 Location: Redding Ca. Posts: 207	Re: Now a 71 C20 chevy with tilt I will take the oil pressure line. Also wondering if you have a set of the push switches that are on the inside of the door jam that turn on the courtesy lights. Price shipped to 96062 Thanks Shawn __________________ 1969 C10 LWB GMC. 1970 K5 Blazer 1971 K10 Burb Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=529970 Shawn

11-09-2012, 08:17 PM	#50
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,453	Re: Now a 71 C20 chevy with tilt Randy any luck on the throttle cable? Thanks - Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.