LA 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lousblown55chevy · 01-28-2013, 07:13 PM

2nd in line for the heads

Chevy4Life · 01-28-2013, 07:35 PM

Where did you get the turned down Coolant Temp Sensor and are you sure it works in the same Ohm range as the stock gauge?
Thanks!

gringoloco · 01-28-2013, 09:10 PM

Quote:

Originally Posted by lousblown55chevy

2nd in line for the heads

Just sent his shipping quote, you're next

Quote:

Originally Posted by Chevy4Life

Where did you get the turned down Coolant Temp Sensor and are you sure it works in the same Ohm range as the stock gauge?
Thanks!

Fairly sure. I picked it up at a swap meet... If no worky, I'll refund his money.

yellowGT · 01-29-2013, 03:17 AM

What do u think shipping would be for the motor to 75040

gringoloco · 01-29-2013, 08:58 AM

It would have to go truck freight, probably a couple hundred. Try uship.com for a quote. I will put it on a standard pallet
Posted via Mobile Device

jmedero · 01-29-2013, 09:11 AM

What project are you parting out man?
Posted via Mobile Device

gringoloco · 01-29-2013, 09:30 AM

This was all slated for my 70 pickup, but we have overseas orders, so I'm purging the garage.
Posted via Mobile Device

jmedero · 01-29-2013, 10:16 AM

One of the guys that works for me just got deployed to Cuba. Good luck on the sale.
Posted via Mobile Device

1970 C10 MJW · 01-29-2013, 05:58 PM

payment sent for the heads thanks again!!! and i am praying for you and your wife while you get deported! take care of yourself!

gringoloco · 01-29-2013, 06:58 PM

Got it. Will ship ASAP.

6.0 still available! Make me an offer, I need my engine stand

Posted via Mobile Device

faribran · 01-29-2013, 09:54 PM

Gringoloco, where are you off to?
Posted via Mobile Device

BB72CHEVKT · 01-29-2013, 10:20 PM

Quote:

Originally Posted by yellowGT

What do u think shipping would be for the motor to 75040

Did you notice he is in Shreveport?

gringoloco · 01-30-2013, 12:21 AM

Quote:

Originally Posted by faribran

Gringoloco, where are you off to?
Posted via Mobile Device

We'll be speaking the Queen's English

Quote:

Originally Posted by yellowGT

What do u think shipping would be for the motor to 75040

Quote:

Originally Posted by BB72CHEVKT

Did you notice he is in Shreveport?

Yeah, wanna come get it? Meet me halfway?

faribran · 01-30-2013, 12:41 PM

We'll be speaking the Queen's English

KEWL... enjoy..

Jon01 · 01-30-2013, 05:04 PM

Still have the cam? Would you do a package deal for it and the LS6 springs?

gringoloco · 01-30-2013, 05:32 PM

LS2 cam and springs are sold/shipped. Comp cam is available.
Posted via Mobile Device

gringoloco · 01-30-2013, 05:32 PM

Updated price for 6.0

Posted via Mobile Device

low69chevy · 01-30-2013, 08:47 PM

If willing to part pcm and harness from engine. Also its for a 4l80e if so how much would you want shipped to freeport,tx 77541. Thanks

low69chevy · 01-30-2013, 09:00 PM

If willing to part pcm and harness from engine. Also its for a 4l80e if so how much would you want shipped to freeport,tx 77541. Thanks

Jon01 · 01-30-2013, 09:31 PM

Gonna have to pass on the cam, found an ASA cam locally.
Could you post or PM me your zip so I can check on shipping on the motor?
Would you be willing to take it to a local depot?

gringoloco · 01-30-2013, 10:14 PM

Quote:

Originally Posted by low69chevy

If willing to part pcm and harness from engine. Also its for a 4l80e if so how much would you want shipped to freeport,tx 77541. Thanks

I'll let you know if I decide to part

Quote:

Originally Posted by Jon01

Gonna have to pass on the cam, found an ASA cam locally.
Could you post or PM me your zip so I can check on shipping on the motor?
Would you be willing to take it to a local depot?

It will be shipping from 71105. I will pallet it and drop it off locally if need be, no problem

Jon01 · 01-30-2013, 11:00 PM

Ok, I'll put something up on U-ship to get some shipping quotes.
If they come back reasonable I'll take it off of your hands. Will update as soon as I know more.
Thanks!

gringoloco · 01-30-2013, 11:48 PM

Quote:

Originally Posted by Jon01

Ok, I'll put something up on U-ship to get some shipping quotes.
If they come back reasonable I'll take it off of your hands. Will update as soon as I know more.
Thanks!

Sounds good, please keep me informed

yellowGT · 01-31-2013, 12:35 AM

So what would you say the total weight of it is with accessories and harness? Im trying to get a more accurate quote from uship

gringoloco · 01-31-2013, 12:40 AM

Should be in the neighborhood of 500lbs. I'd go 550 just to be sure
Posted via Mobile Device

01-28-2013, 07:13 PM	#26
lousblown55chevy Registered User Join Date: Feb 2012 Location: Saint Charles MO. Posts: 197	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts 2nd in line for the heads

01-28-2013, 07:35 PM	#27
Chevy4Life Senior Member Join Date: Feb 2003 Location: Las Vegas, NV Posts: 749	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts Where did you get the turned down Coolant Temp Sensor and are you sure it works in the same Ohm range as the stock gauge? Thanks!

01-29-2013, 03:17 AM	#29
yellowGT Registered User Join Date: Jan 2006 Location: Garland, TX Posts: 970	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts What do u think shipping would be for the motor to 75040 __________________ '84 swb chevy '69 swb chevy '68 swb chevy '95 Impala ss-sold '89 chevy crew cab dually 3+3

01-29-2013, 08:58 AM	#30
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts It would have to go truck freight, probably a couple hundred. Try uship.com for a quote. I will put it on a standard pallet Posted via Mobile Device __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

01-29-2013, 09:11 AM	#31
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts What project are you parting out man? Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

01-29-2013, 09:30 AM	#32
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts This was all slated for my 70 pickup, but we have overseas orders, so I'm purging the garage. Posted via Mobile Device __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

01-29-2013, 10:16 AM	#33
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts One of the guys that works for me just got deployed to Cuba. Good luck on the sale. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

01-29-2013, 05:58 PM	#34
1970 C10 MJW Registered User Join Date: Aug 2012 Location: Indiana Posts: 470	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts payment sent for the heads thanks again!!! and i am praying for you and your wife while you get deported! take care of yourself! __________________ 70 C10 working on a LSx swap 4.8L MS3 edelbrock pro flo intake, pacesetter long tubes, 4l60e 2500 stall hoping the tranny holds up lol

01-29-2013, 06:58 PM	#35
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts Got it. Will ship ASAP. 6.0 still available! Make me an offer, I need my engine stand Posted via Mobile Device __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

01-29-2013, 09:54 PM	#36
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts Gringoloco, where are you off to? Posted via Mobile Device __________________ "

01-30-2013, 12:41 PM	#39
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts We'll be speaking the Queen's English KEWL... enjoy.. __________________ "

01-30-2013, 05:04 PM	#40
Jon01 Registered User Join Date: Nov 2012 Location: West Des Moines, Iowa Posts: 450	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts Still have the cam? Would you do a package deal for it and the LS6 springs?

01-30-2013, 05:32 PM	#41
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts LS2 cam and springs are sold/shipped. Comp cam is available. Posted via Mobile Device __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

01-30-2013, 08:47 PM	#43
low69chevy Registered User Join Date: Jul 2011 Location: edinburg tx Posts: 174	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts If willing to part pcm and harness from engine. Also its for a 4l80e if so how much would you want shipped to freeport,tx 77541. Thanks

01-30-2013, 09:00 PM	#44
low69chevy Registered User Join Date: Jul 2011 Location: edinburg tx Posts: 174	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts If willing to part pcm and harness from engine. Also its for a 4l80e if so how much would you want shipped to freeport,tx 77541. Thanks



Register or Log In To remove these advertisements.

01-30-2013, 09:31 PM	#45
Jon01 Registered User Join Date: Nov 2012 Location: West Des Moines, Iowa Posts: 450	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts Gonna have to pass on the cam, found an ASA cam locally. Could you post or PM me your zip so I can check on shipping on the motor? Would you be willing to take it to a local depot?

01-30-2013, 11:00 PM	#47
Jon01 Registered User Join Date: Nov 2012 Location: West Des Moines, Iowa Posts: 450	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts Ok, I'll put something up on U-ship to get some shipping quotes. If they come back reasonable I'll take it off of your hands. Will update as soon as I know more. Thanks!

01-31-2013, 12:35 AM	#49
yellowGT Registered User Join Date: Jan 2006 Location: Garland, TX Posts: 970	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts So what would you say the total weight of it is with accessories and harness? Im trying to get a more accurate quote from uship __________________ '84 swb chevy '69 swb chevy '68 swb chevy '95 Impala ss-sold '89 chevy crew cab dually 3+3

01-31-2013, 12:40 AM	#50
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts Should be in the neighborhood of 500lbs. I'd go 550 just to be sure Posted via Mobile Device __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.