TN Parting 1987 C-10 - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bowtiecharlie · 03-06-2013, 08:48 PM

If the side fender emblems "silverado" are good and the hood emblem is good,work me a price with shipping to 08302 in NJ and I'll get in line for those front bumper gaurds!!

puppy · 03-07-2013, 11:17 AM

Quote:

Originally Posted by gm_187

a picture for the dash emblem

Noted.

Quote:

Originally Posted by l1l

I'll do $100 shipped

No.

Quote:

Originally Posted by DVD87V10

I'll take the bumper with guards and grill trim if you could get me a quote shipped to 19021. Thanks

Let me see if I can find a big box.

Quote:

Originally Posted by Damon23

How is the tailgate band?
Posted via Mobile Device

See poor pic below.

Quote:

Originally Posted by bowtiecharlie

If the side fender emblems "silverado" are good and the hood emblem is good,work me a price with shipping to 08302 in NJ and I'll get in line for those front bumper gaurds!!

I'd say they are driver quality. Haven't looked close.

Hey the hood is straight. Wish you guys were closer!

puppy · 03-07-2013, 11:21 AM

DVD87V10 · 03-08-2013, 09:46 AM

How much for the tailgate band?

devinder8788 · 03-09-2013, 01:49 AM

still got the Front bumper with guards??

puppy · 03-11-2013, 09:41 AM

Quote:

Originally Posted by DVD87V10

How much for the tailgate band?

$25 + shipping

Quote:

Originally Posted by devinder8788

still got the Front bumper with guards??

Still got it.

Not sure what shipping on the bumper is gonna be. Might be a deal breaker.

puppy · 03-11-2013, 09:51 AM

Got alot of the truck stripped this weekend.

Parts available:
tailgate band - 25
2 rear trim aluminum corner pieces from the bed - 20
rear cargo light, harness, and switch - 25
2 rear corner speaker brackets with speakers and wiring pigtail - 20
2 door mirrors - 25
rear sliding window - sale pending
complete tan interior - 50
brown glove box - 25
gauge cluster with bezel - 50
auto steering column - 100
bumper guards - 50
bench seat, no shipping - 25
seat belts - 25
fender emblems - 20
drip rails - 30

Misc screws, brackets, switches, wires, cables, A/C parts, and ???? I hate to see them gone forever, but I can't keep this one after the engine is pulled.

That is all that comes to mind. Look over the pics and let me know.

First come first serve. Tired of dealing with tire kickers.

DVD87V10 · 03-11-2013, 11:27 AM

I'll take the bumper guards, tailgate band shipped to 19021.

How much for the interior trim pieces?

puppy · 03-11-2013, 12:19 PM

Quote:

Originally Posted by DVD87V10

I'll take the bumper guards, tailgate band shipped to 19021.

How much for the interior trim pieces?

Bumper guards and tailgate band sold pending payment.

$50 + shipping for everything. A and B pillars, kick panels, headliner trim, not sure what the other pieces are called. Not door panels, dash, or carpet basically. Confused?

fxdxharley · 03-11-2013, 12:42 PM

are you selling the wheels? im looking for a set of the stock 15 x8 truck rally's? if so how much shipped to 03825?
also looking for the steering center link. how much? see part circled in red.

DVD87V10 · 03-11-2013, 02:06 PM

Quote:

Originally Posted by puppy

Bumper guards and tailgate band sold pending payment.

$50 + shipping for everything. A and B pillars, kick panels, headliner trim, not sure what the other pieces are called. Not door panels, dash, or carpet basically. Confused?

I'll just stick with the bumper guards and tailgate band for now I think. What is the total I'm looking at for shipping to 19021?

puppy · 03-13-2013, 10:21 AM

Quote:

Originally Posted by fxdxharley

are you selling the wheels? im looking for a set of the stock 15 x8 truck rally's? if so how much shipped to 03825?
also looking for the steering center link. how much? see part circled in red.

Let me check the condition of the steering center link.

puppy · 03-13-2013, 11:14 AM

Quote:

Originally Posted by DVD87V10

I'll just stick with the bumper guards and tailgate band for now I think. What is the total I'm looking at for shipping to 19021?

The band isn't perfect. Check out the pic and let me know for sure.

devinder8788 · 03-13-2013, 01:34 PM

if you still got the bumper guards i will take them pay you right away

DVD87V10 · 03-13-2013, 08:24 PM

Quote:

Originally Posted by puppy

The band isn't perfect. Check out the pic and let me know for sure.

Yeah maybe I'll pass on the band for now. Maybe later if you still have it. How much and what email should I PayPal the money to?
Posted via Mobile Device

1985_C10 · 03-13-2013, 11:32 PM

are the bumper guards still available?

puppy · 03-14-2013, 11:46 AM

Quote:

Originally Posted by DVD87V10

Yeah maybe I'll pass on the band for now. Maybe later if you still have it. How much and what email should I PayPal the money to?
Posted via Mobile Device

Let me get them off and boxed up this weekend.

Quote:

Originally Posted by 1985_C10

are the bumper guards still available?

Bumper guards are spoken for.

DVD87V10 · 03-15-2013, 02:43 PM

Sounds good. Keep me posted.

gm_187 · 03-15-2013, 05:54 PM

consider cargo light with switch and rear slider window sold. PM sent

bowtiecharlie · 03-15-2013, 07:27 PM

Justin,
Did you get my pm yesterday, I sent payment for the fender emblems and cargo lamp package?

FritzA · 03-16-2013, 02:26 PM

You mentioned the wire harness was sold with engine but what about the fuse box? Both underdash piece and the engine compartment side?

Thanks

puppy · 03-17-2013, 11:47 AM

Quote:

Originally Posted by bowtiecharlie

Justin,
Did you get my pm yesterday, I sent payment for the fender emblems and cargo lamp package?

Reply sent.

Quote:

Originally Posted by FritzA

You mentioned the wire harness was sold with engine but what about the fuse box? Both underdash piece and the engine compartment side?

Thanks

I can pull those off.

Truck is stripped and loaded on trailer for it's last ride sometime this week. Better speak up!
Posted via Mobile Device

puppy · 03-17-2013, 11:51 AM

TBI 350 and 700R4 complete with harness, ECM, fan to tail shaft, air cleaner to oil pan, ran and pulled yesterday.

$600
Posted via Mobile Device

FritzA · 03-17-2013, 01:50 PM

Great, how much for the fuse panel (underdash and engine compartment size?

puppy · 03-18-2013, 09:50 AM

Quote:

Originally Posted by FritzA

Great, how much for the fuse panel (underdash and engine compartment size?

PM sent

03-06-2013, 08:48 PM	#26
bowtiecharlie Registered User Join Date: Jan 2012 Location: quinton,nj Posts: 28	Re: Parting 1987 C-10 If the side fender emblems "silverado" are good and the hood emblem is good,work me a price with shipping to 08302 in NJ and I'll get in line for those front bumper gaurds!! __________________

03-07-2013, 11:21 AM	#28
puppy Registered User Join Date: Nov 2007 Location: Rives, TN Posts: 362	Re: Parting 1987 C-10 __________________ '11 Z71 '88 V-30 Crew Cab '87 V-10 '69 Camaro SS '52 M38 '46 Rat Rod Word of the wise should be sufficient!

03-08-2013, 09:46 AM	#29
DVD87V10 Registered User Join Date: Mar 2012 Location: Croydon, PA Posts: 58	Re: Parting 1987 C-10 How much for the tailgate band?

03-09-2013, 01:49 AM	#30
devinder8788 Registered User Join Date: Feb 2013 Location: Blane WA Posts: 53	Re: Parting 1987 C-10 still got the Front bumper with guards??

03-11-2013, 09:51 AM	#32
puppy Registered User Join Date: Nov 2007 Location: Rives, TN Posts: 362	Re: Parting 1987 C-10 Got alot of the truck stripped this weekend. Parts available: tailgate band - 25 2 rear trim aluminum corner pieces from the bed - 20 rear cargo light, harness, and switch - 25 2 rear corner speaker brackets with speakers and wiring pigtail - 20 2 door mirrors - 25 rear sliding window - sale pending complete tan interior - 50 brown glove box - 25 gauge cluster with bezel - 50 auto steering column - 100 bumper guards - 50 bench seat, no shipping - 25 seat belts - 25 fender emblems - 20 drip rails - 30 Misc screws, brackets, switches, wires, cables, A/C parts, and ???? I hate to see them gone forever, but I can't keep this one after the engine is pulled. That is all that comes to mind. Look over the pics and let me know. First come first serve. Tired of dealing with tire kickers. __________________ '11 Z71 '88 V-30 Crew Cab '87 V-10 '69 Camaro SS '52 M38 '46 Rat Rod Word of the wise should be sufficient! Last edited by puppy; 03-11-2013 at 10:10 AM.

03-11-2013, 11:27 AM	#33
DVD87V10 Registered User Join Date: Mar 2012 Location: Croydon, PA Posts: 58	Re: Parting 1987 C-10 I'll take the bumper guards, tailgate band shipped to 19021. How much for the interior trim pieces?

03-11-2013, 12:42 PM	#35
fxdxharley Just a nother gear head Join Date: Jul 2009 Location: Barrington NH Posts: 501	Re: Parting 1987 C-10 are you selling the wheels? im looking for a set of the stock 15 x8 truck rally's? if so how much shipped to 03825? also looking for the steering center link. how much? see part circled in red. Attached Images __________________ 2013 HD FLHX 2000 chevy 2500 6.0l 4x4 3dr 2000 harley fxdx 71 Jimmy 4x4- future crawler/ woods rig 71 blazer (C4 2wd conv project) http://67-72chevytrucks.com/vboard/s...d.php?t=523589 Last edited by fxdxharley; 03-11-2013 at 12:52 PM. Reason: added pic for ref.

03-13-2013, 01:34 PM	#39
devinder8788 Registered User Join Date: Feb 2013 Location: Blane WA Posts: 53	Re: Parting 1987 C-10 if you still got the bumper guards i will take them pay you right away

03-13-2013, 11:32 PM	#41
1985_C10 Registered User Join Date: Feb 2013 Location: Saint Louis, MO Posts: 149	Re: Parting 1987 C-10 are the bumper guards still available?

03-15-2013, 02:43 PM	#43
DVD87V10 Registered User Join Date: Mar 2012 Location: Croydon, PA Posts: 58	Re: Parting 1987 C-10 Sounds good. Keep me posted.

03-15-2013, 05:54 PM	#44
gm_187 Registered User Join Date: Aug 2010 Location: indianapolis- IN Posts: 86	Re: Parting 1987 C-10 consider cargo light with switch and rear slider window sold. PM sent

03-15-2013, 07:27 PM	#45
bowtiecharlie Registered User Join Date: Jan 2012 Location: quinton,nj Posts: 28	Re: Parting 1987 C-10 Justin, Did you get my pm yesterday, I sent payment for the fender emblems and cargo lamp package? __________________

03-16-2013, 02:26 PM	#46
FritzA Registered User Join Date: Jul 2009 Location: Denver Burbs, CO Posts: 116	Re: Parting 1987 C-10 You mentioned the wire harness was sold with engine but what about the fuse box? Both underdash piece and the engine compartment side? Thanks

03-17-2013, 11:51 AM	#48
puppy Registered User Join Date: Nov 2007 Location: Rives, TN Posts: 362	Re: Parting 1987 C-10 TBI 350 and 700R4 complete with harness, ECM, fan to tail shaft, air cleaner to oil pan, ran and pulled yesterday. $600 Posted via Mobile Device __________________ '11 Z71 '88 V-30 Crew Cab '87 V-10 '69 Camaro SS '52 M38 '46 Rat Rod Word of the wise should be sufficient!

03-17-2013, 01:50 PM	#49
FritzA Registered User Join Date: Jul 2009 Location: Denver Burbs, CO Posts: 116	Re: Parting 1987 C-10 Great, how much for the fuse panel (underdash and engine compartment size?



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.