OR Misc parts from a few trucks

[Truckseats]

Would like to see a close up picture of the rear view mirror glass if "bronze 72 super" passes. No hurry at all. Thanks

[tll74]

pics

[tll74]

pics

[tll74]

pics

[29od1]

I'll take the heater controller, but pass on the 72 rearview mirror. I was looking for a SS mirror body instead of painted. Please PM your PP address so I can pay for the controller.
Thanks,
David

[tll74]

pics

[tll74]

Originally Posted by MadnessBigBlock

Insterested in 402 carb linkage and bbc shroud shipped to 58265 thanks.
Posted via Mobile Device

Shipping on the shroud and linkage is 17.92

Originally Posted by tdj4bama

Tom, are the headers for a sb? If so, how much would shipping be to 35633?
Thanks, Truman
Posted via Mobile Device

Yes they are for a sbc. shipping is 25.00

Originally Posted by shawno72

Tom I'm looking for one nice 67-68 CST door badge with no pitting and a drivers side chrome vent window with softray glass in excellent shape. Let me know what you have shipped to 95240 business address. Thank you.
Posted via Mobile Device

Shawn, no luck on a badge thats not pitted. I have a couple 67's with chrome but not sure if they are tinted. I'll look.

Originally Posted by 29od1

I'll take the non AC heater controller pending a close up of the face and that the rivets are still tight.

I'm also looking for a good 72 rearview mirror if you have one.

Thanks,
David

David, the housing halfs are tight. It should fit into a flat rate box for 12.35

Originally Posted by REEDS 72

I want the one groove water pump pulley its going to replace a three groove one on a bbc it will work for that right.

It will bolt on a BBC but it will not center up on the balancer. The BBC has a bigger center hole.

Originally Posted by nobolt

interested in the west coast jrs...any damage or missing parts? how is the glass? factory paint?
thanks

There is no missing parts. They have been repainted and the LH has scratches. I have the glass replaced often locally for 20.00. There is a ding in one of the backs of the mirror head. It is very minor about the size of a minor door ding.

Originally Posted by REEDS 72

All take black heater vents

Shipping would be 6.00

Originally Posted by Oddfire

Tom: I'm looking for the following items: 1) 69-71 saddle armrest, set of
west coast jr chrome mirrors, 69-71 door panel & armrest screws, AC glove
box w/screws, set of trico wiper blades, telescopic antenna, & a pr of 71-
72 GMC 2500 sierra emblems. Lemme know what you got & shipping to 22630.
thanks Jamie 71 Longhorn

Jamie, I have will have to check on the armrest. I have the door panel and armrest screws 5.00, wiper blades 10.00, I have the antenna with a spring at the base 25.00, no sierra emblems. 14.00 shipping on what i just priced.

Originally Posted by vidman

I will take the E-Brake cable,rods and guides for the 400, and if you have a good 400 kick-down harness for a 72 I need one..ships to 01430 Thanks

Shipping on the cable assy. As for the TH400 kick down it would be the wiring and the switch for 26.00. It is still one a complete 72 Sub 402 truck. It could ship with the cable.

Originally Posted by asolde

Looking for a jack kit with the bag. I have a 72 c10 and a 69 blazer. Price and shipped to Houston tx 77339

I can do it for the C10 with the bag 100.00 and 20.00 shipping

Originally Posted by too much stuff

Can i see a better pic of the gmc emblem?

pic posted

Originally Posted by 47thriftmaster

Second on the mirrors, could you get some close pics. Looking for a good set of mirrors, SS or painted.

pics posted. We'll see what nobolt decides.

Originally Posted by djgebert

I will take the outside heater housing and black visors shipped to 46835, Thanks!!
Do you have a set of black seat belts?

Shipping on the visors and heater housing 19.48. Yes, have a set of black belts. Do you want 2 or 3 pass set? 125.00 for 2 pass, 150.00 3 pass. Nice belts.

Originally Posted by midniteblues

put me inline on the bbc fan shroud pending better picks

pics posted. I have more of these if needed. 85.00 plus for one with no issues.

Originally Posted by dirish

Interest in sb shroud. Shipping to 37148
Thanks
Posted via Mobile Device

Shipping is 16.50

Originally Posted by bronze 72 super

Sounds good on the jack, how much with and without the bag? Working with a 3/4 truck. I'll take the window, door handles as well and the pedal with trim. Thanks Mike.

Mike, Howdy fellow oregonian. I go past you often on I-84 on my way to La Grande picking up truck boxes. 60.00 with out the bag. Jack, crank handle, and lug wrench. All "correct" for a 1970 C20. The jack has been tanked, acid dipped and media blasted. You lube it up and paint. Your down for the cranks, handles, gas pedal w/trim, and rear view mirror if you decide after viewing pic. I have the under dash and headlamp wiring in this thread. I do have a 72 C20 402 still complete but not sure how good the engine wiring is. Sure come on down! Always glad to meet a fellow addict.

Originally Posted by HotRod C/10

inline on
E-brake cable with rods and TH400 guides. 15.00

I have several of these.

Originally Posted by MadnessBigBlock

Also in line on E brake cables, rods and th400 guides
Posted via Mobile Device

Again, I have more of these.

Originally Posted by buddylee

How about a passenger side inner fender or at least the front section of where it attaches to the core support. I could cut and patch it.
Posted via Mobile Device

Sorry no luck on the inner RH. I save all of these for my builds.

Originally Posted by Truckseats

Would like to see a close up picture of the rear view mirror glass if "bronze 72 super" passes. No hurry at all. Thanks

pic posted

Originally Posted by 29od1

I'll take the heater controller, but pass on the 72 rearview mirror. I was looking for a SS mirror body instead of painted. Please PM your PP address so I can pay for the controller.
Thanks,
David

David, PM coming soon


If I missed some just speak up. Thanks Guys, Tom

[nobolt]

i'll take the WCJ mirrors. i think i was 1st in line. PM me with your info. please. shipping to 48001

[djgebert]

Please PM me your payment info for the outside heater box and visors and I will send you the payment. I think I will wait for a while on the seatbelts. Thanks!!

[Oddfire]

Cool beans. Check on the armrest then give me a total. Jamie 71 Longhorn

[vidman]

I,ll take the 400 harness,switch and the cable assembly. PM me the total price. shipping to 01430...Thanks Rick

[MadnessBigBlock]

I will take the bbc shroud but pass on the 402 linkage. I will take the gmc emblem if toomuchstuff passes. Thanks, Brett.
Posted via Mobile Device

[too much stuff]

GMC emblem to 55744 total?

[asolde]

Quote:
Originally Posted by asolde
Looking for a jack kit with the bag. I have a 72 c10 and a 69 blazer. Price and shipped to Houston tx 77339

I can do it for the C10 with the bag 100.00 and 20.00 shipping


Could you please post a picture of the Jack kit with the bag? Thanks Alex

[LSUMurse]

I'm looking for a 2 belt water pump pulley for 67-68. They are different from the others in that the bolt holes are a different distance from center. I'm also looking for a rear view mirror assembly (bracket and mirror) for a '68. It doesn't have to be perfect, but driver decent. If you wouldn't mind quoting shipped it'll be to 70065.

[shawno72]

Originally Posted by tll74

Shawn, no luck on a badge thats not pitted. I have a couple 67's with chrome but not sure if they are tinted. I'll look.
Thanks Guys, Tom

Thanks Tom, I need a chrome drivers side vent for a 68.

[bronze 72 super]

Tom, could you give me a total price on all items? Do you drive long haul or interstate truck? Stop by Bob's T-bone some time if time allows and I'll buy you a cup of coffee, as long as it's a weekend or evening!! Going to the Portland Swap Meet this year? I'll be in the Red area, I vend there ever year, putting my 1967 Impala S.S. 396 up for sale. Thanks Mike.

[tll74]

Originally Posted by nobolt

i'll take the WCJ mirrors. i think i was 1st in line. PM me with your info. please. shipping to 48001

shipping cost to come in the morning.

Originally Posted by djgebert

Please PM me your payment info for the outside heater box and visors and I will send you the payment. I think I will wait for a while on the seatbelts. Thanks!!

PM sent

Originally Posted by Oddfire

Cool beans. Check on the armrest then give me a total. Jamie 71 Longhorn

No armrest off, I'll look on some trucks.

Originally Posted by vidman

I,ll take the 400 harness,switch and the cable assembly. PM me the total price. shipping to 01430...Thanks Rick

Some how I failed to post the shipping cost earlier. I forgot what it was. I'll get it in the morning.

Originally Posted by MadnessBigBlock

I will take the bbc shroud but pass on the 402 linkage. I will take the gmc emblem if toomuchstuff passes. Thanks, Brett.
Posted via Mobile Device

Brett, Ok, we'll see on the emblem.

Originally Posted by too much stuff

GMC emblem to 55744 total?

5.80 in a USPS flat rate box.

Originally Posted by asolde

Quote:
Originally Posted by asolde
Looking for a jack kit with the bag. I have a 72 c10 and a 69 blazer. Price and shipped to Houston tx 77339

I can do it for the C10 with the bag 100.00 and 20.00 shipping


Could you please post a picture of the Jack kit with the bag? Thanks Alex

I'll get you some pics.

Originally Posted by LSUMurse

I'm looking for a 2 belt water pump pulley for 67-68. They are different from the others in that the bolt holes are a different distance from center. I'm also looking for a rear view mirror assembly (bracket and mirror) for a '68. It doesn't have to be perfect, but driver decent. If you wouldn't mind quoting shipped it'll be to 70065.

I'll look. I've got a couple 68's.

Originally Posted by shawno72

Thanks Tom, I need a chrome drivers side vent for a 68.

Shawn, I'll look in the morning.

Originally Posted by bronze 72 super

Tom, could you give me a total price on all items? Do you drive long haul or interstate truck? Stop by Bob's T-bone some time if time allows and I'll buy you a cup of coffee, as long as it's a weekend or evening!! Going to the Portland Swap Meet this year? I'll be in the Red area, I vend there ever year, putting my 1967 Impala S.S. 396 up for sale. Thanks Mike.

Mike, I need your zip. No, I drive the black sheep of the family a f**d with a trailer picking up new pickup boxes off new trucks. I think I've seen that restaurant from the hwy. Yes, I'll be at the swap meet. I have 6 stalls on the back side of the buildings. I plan to bring up a 72 Cheyenne Super 10 and a 71 GMC K20 and a bunch of misc.

[djgebert]

Payment sent, thanks!!

[tll74]

nobolt, Shipping cost sent in PM.

Oddfire, Sorry no armrest. Total with shipping 54.00

Vidman, shipping is 16.98

MadnessBigBlock, still waiting on emblem status from too much stuff.

asolde, pic of the jack below. The jack has been hot tanked, acid dipped, and media blasted. The bag has tear as the pic shows. A pretty decent bag considering. Its from a 72 C10.

LUSMurse, sorry forgot to look this morning. I try to do so tomorrow morning.

Shawn, Here's a pic of a very nice vent assembly. I would have to have 75.00 plus 15.00 shipping to your shop.

Thanks, Tom

[too much stuff]

In on the emblem, i forgot to respond earlier...

[shawno72]

That looks good Tom but do you have one for a 68?
Posted via Mobile Device

[tll74]

Originally Posted by shawno72

That looks good Tom but do you have one for a 68?
Posted via Mobile Device

Ummm...my bad. My oldtimerzzz is doing well. How did
i do that?? Heck I've got the 68 type off. I'll make another attemp tomorrow.

[asolde]

asolde, pic of the jack below. The jack has been hot tanked, acid dipped, and media blasted. The bag has tear as the pic shows. A pretty decent bag considering. Its from a 72 C10.

I will take it please pm me your payment info. Thanks Alex

[shawno72]

Originally Posted by tll74

Ummm...my bad. My oldtimerzzz is doing well. How did
i do that?? Heck I've got the 68 type off. I'll make another attemp tomorrow.

No worries, thanks Tom.