TX Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jjzepplin · 03-17-2013, 09:10 AM

Do you have a rag joint? Can't seem to find one... Even on this forum.

**WIDESIDE72** · 03-17-2013, 11:04 AM

Quote:

Originally Posted by jjzepplin

Do you have a rag joint? Can't seem to find one... Even on this forum.

I might be going back out thurs to pick the truck over for the last time and I will check
Posted via Mobile Device

bronze 72 super · 03-17-2013, 12:34 PM

Like to get the lighter and wiring. Shipping to 97050. Thanks Mike.

**WIDESIDE72** · 03-17-2013, 01:25 PM

Quote:

Originally Posted by bronze 72 super

Like to get the lighter and wiring. Shipping to 97050. Thanks Mike.

Pm sent with payment info
Posted via Mobile Device

jjzepplin · 03-20-2013, 08:00 AM

Quote:

Originally Posted by jjzepplin

Do you have a rag joint? Can't seem to find one... Even on this forum.

Any luck? I need one with a 3/4" shaft spline.

**WIDESIDE72** · 03-20-2013, 01:22 PM

Quote:

Originally Posted by jjzepplin

Any luck? I need one with a 3/4" shaft spline.

I have not been back yet and won't be until friday
Posted via Mobile Device

**WIDESIDE72** · 03-23-2013, 11:33 PM

Quote:

Originally Posted by jjzepplin

Do you have a rag joint? Can't seem to find one... Even on this forum.

Pretty nice rag joint on the truck. The box and pump hadn't leaked and ruined it yet. These are like hen's teeth. $50 shipped, otherwise I will keep it for myself.

jjzepplin · 03-24-2013, 06:26 AM

Quote:

Originally Posted by WIDESIDE72

Pretty nice rag joint on the truck. The box and pump hadn't leaked and ruined it yet. These are like hen's teeth. $50 shipped, otherwise I will keep it for myself.

I have one on it's way so I will wait on this one. If it turns out to be the wrong one ( again ) I will hit you up.

bowtietruknut · 03-17-2013, 10:38 AM

I'll take the steering column if it gets to me
Posted via Mobile Device

**WIDESIDE72** · 03-19-2013, 04:29 AM

Quote:

Originally Posted by bowtietruknut

I'll take the steering column if it gets to me
Posted via Mobile Device

Youre up. Pm sent
Posted via Mobile Device

starfire58 · 03-19-2013, 01:23 PM

How about an uncut a/c dash panel?

**WIDESIDE72** · 03-19-2013, 01:35 PM

Quote:

Originally Posted by starfire58

How about an uncut a/c dash panel?

I will ask the yard owner about getting it out. The dash in the truck is an ac dash and uncut, but I don't have any way of getting the spot welds loose.
Posted via Mobile Device

**WIDESIDE72** · 03-17-2013, 12:32 PM

Clutch delete plate (on firewall behind driver side valve cover) $10 shipped. Sorry no photos at this time
Posted via Mobile Device

crushing · 03-17-2013, 01:34 PM

Do you have the antenna off the truck?
Posted via Mobile Device

**WIDESIDE72** · 03-17-2013, 01:35 PM

Quote:

Originally Posted by crushing

Do you have the antenna off the truck?
Posted via Mobile Device

Sorry it was already gone
Posted via Mobile Device

REEDS 72 · 03-17-2013, 01:35 PM

Hi will you do 25 shipped on the tail light harness thanks.

**WIDESIDE72** · 03-17-2013, 01:40 PM

Quote:

Originally Posted by REEDS 72

Hi will you do 25 shipped on the tail light harness thanks.

It's yours. Pm sent with payment info
Posted via Mobile Device

brian1971 · 03-17-2013, 03:28 PM

payment sent for brake light switch thanks brian

the ideaman · 03-17-2013, 04:47 PM

Paypal sent.
Posted via Mobile Device

pbjsammich · 03-18-2013, 12:28 PM

I'd be interested in the gauge cluster if you might have an AC/Heater control panel to go with it? Trying to score these two items from the same seller if possible. Appreciate it!

Ken

**WIDESIDE72** · 03-19-2013, 01:33 PM

Quote:

Originally Posted by pbjsammich

I'd be interested in the gauge cluster if you might have an AC/Heater control panel to go with it? Trying to score these two items from the same seller if possible. Appreciate it!

Ken

At least one of the levers was broken on the Ac control in this truck but I have another one from a Cheyenne I parted. It would like to like to lay my hands on it first to make sure i really do have it and be sure of it's condition before I give a price on it, though.
Posted via Mobile Device

pbjsammich · 03-19-2013, 01:43 PM

Quote:

Originally Posted by WIDESIDE72

At least one of the levers was broken on the Ac control in this truck but I have another one from a Cheyenne I parted. It would like to like to lay my hands on it first to make sure i really do have it and be sure of it's condition before I give a price on it, though.
Posted via Mobile Device

Sounds good. Throw up a pic and price when available. Appreciate it!

**WIDESIDE72** · 05-02-2013, 08:56 AM

Quote:

Originally Posted by WIDESIDE72

At least one of the levers was broken on the Ac control in this truck but I have another one from a Cheyenne I parted. It would like to like to lay my hands on it first to make sure i really do have it and be sure of it's condition before I give a price on it, though.
Posted via Mobile Device

I went to a swap meet a few weeks ago and pulled everything out but didn't come across the Ac control. I must have sold it. New price on gauge clusters, $40 shipped. I have two ith gauges and one with idiot lights
Posted via Mobile Device

**WIDESIDE72** · 03-23-2013, 11:42 PM

Quote:

Originally Posted by pbjsammich

I'd be interested in the gauge cluster if you might have an AC/Heater control panel to go with it? Trying to score these two items from the same seller if possible. Appreciate it!

Ken

I know I had a good ac control at one time, but I think its in a trialer load of stuff I was going to take to the New Braunfels swap meet next month and I didnt have time to dig for it this weekend. I will try next THurs or Fri if you can wait.

**WIDESIDE72** · 03-19-2013, 04:27 AM

Bowtienut, you are up on the tilt
Posted via Mobile Device

03-17-2013, 09:10 AM	#1
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,595	Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets Do you have a rag joint? Can't seem to find one... Even on this forum. __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

03-17-2013, 12:34 PM	#3
bronze 72 super Registered User Join Date: Sep 2007 Location: Rufus Oregon Posts: 1,186	Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets Like to get the lighter and wiring. Shipping to 97050. Thanks Mike.

03-17-2013, 10:38 AM	#9
bowtietruknut Registered User Join Date: Sep 2009 Location: Albertville Al. Posts: 45	Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets I'll take the steering column if it gets to me Posted via Mobile Device

03-19-2013, 01:23 PM	#11
starfire58 Registered User Join Date: Oct 2012 Location: Streator, Illinois Posts: 123	Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets How about an uncut a/c dash panel?

03-17-2013, 12:32 PM	#13
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets Clutch delete plate (on firewall behind driver side valve cover) $10 shipped. Sorry no photos at this time Posted via Mobile Device Last edited by WIDESIDE72; 03-18-2013 at 12:56 PM.

03-17-2013, 01:34 PM	#14
crushing Registered User Join Date: Nov 2012 Location: Tallahassee, FL Posts: 99	Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets Do you have the antenna off the truck? Posted via Mobile Device __________________ 1972 Cheyenne (Major Project) 1993 Jeep Wrangler 2012 Ford F150 FX2 2012 GMC Yukon

03-17-2013, 01:35 PM	#16
REEDS 72 Registered User Join Date: Apr 2011 Location: AMERICAN FORK, UTAH Posts: 535	Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets Hi will you do 25 shipped on the tail light harness thanks.

03-17-2013, 03:28 PM	#18
brian1971 Registered User Join Date: Sep 2012 Location: fort lauderdale,fl Posts: 1,296	Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets payment sent for brake light switch thanks brian __________________ 1971 c10 custom deluxe fleetside swb LS3 w/BTR stage IV cam,4L85E w/3600 stall 67-72chevytrucks.com/vboard/showthread.php?t=558024

03-17-2013, 04:47 PM	#19
the ideaman Registered User Join Date: May 2009 Location: Central Valley,ca Posts: 174	Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets Paypal sent. Posted via Mobile Device

03-18-2013, 12:28 PM	#20
pbjsammich Registered User Join Date: Aug 2011 Location: Lake Conroe TX Posts: 53	Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets I'd be interested in the gauge cluster if you might have an AC/Heater control panel to go with it? Trying to score these two items from the same seller if possible. Appreciate it! Ken __________________ 1967 C10 Stepside - "Minty" 1972 GMC 3500 - "Rojo Grande"

03-19-2013, 04:27 AM	#25
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets Bowtienut, you are up on the tilt Posted via Mobile Device

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.