TN 1972 c10 cheyenne partout

[aftamathe86]

Undone are u wanting chrome 72 or chrome or 68-71
Posted via Mobile Device

[stringbean1073]

Interested in the brake booster if it comes with all the hardware and brackets (including brake pedal rod) and proportional valve. Also if no one gets the P/S brackets I'll take those and the crank pulley (short water pump I assume). Also interested in the bed front. Btw Im new to this site so if I'm doing this wrong please don't get mad at me, I'm a noob.

[thelonerife]

interested in the front bumper. how much picked up? and I have a buddy needing a rearend.

[Undone]

Originally Posted by aftamathe86

Undone are u wanting chrome 72 or chrome or 68-71
Posted via Mobile Device

Whichever is in best shape.

[aftamathe86]

Thelonerlife bumper 75 without bumper brackets with parking lights has chrome nicked on pass side see pic rear end not sure of ratio 130

Stringbean1073 booster comes with brackets rod valve and master cylinder if u want it 50+ shipping it is a short water pumpcrank pulley 10 and dirish asked about power steering bracket haven't heard back yet but if he passes 20 with pump and I believe the bed panel is rusted out on the top under lip

Undone I got a set of chrome soft ray that needs the felt and rubber pitting in chrome 30 for both + shipping
Posted via Mobile Device

[stringbean1073]

Aftamathe86 I'll take it and will take ps brackets if dirish doesnt get them.

[dirish]

I will take the power steering stuff. Pm info please.
Posted via Mobile Device

[stringbean1073]

yes pm me too please ill take the brake booster and pulley.

[aftamathe86]

Stringbean1073 did u want crank pulley as well if so that's 60 + shipping send me a pm with address and I'll box it up and get shipping price dirish took the brackets

Dirish I'll get it off tomorrow morning ad get a price on shipping i will pm u with total should fit in med flat rate box u want pump to or just brackets
Posted via Mobile Device

[thelonerife]

Originally Posted by aftamathe86

Thelonerlife bumper 75 without bumper brackets with parking lights has chrome nicked on pass side see pic rear end not sure of ratio 130

Stringbean1073 booster comes with brackets rod valve and master cylinder if u want it 50+ shipping it is a short water pumpcrank pulley 10 and dirish asked about power steering bracket haven't heard back yet but if he passes 20 with pump and I believe the bed panel is rusted out on the top under lip

Undone I got a set of chrome soft ray that needs the felt and rubber pitting in chrome 30 for both + shipping
Posted via Mobile Device

5 lug right? How about 175 for the bumper and the rear?

[aftamathe86]

Thelonerlife that's fine haven't gotten the rear out yet when were u thinking about coming down
Posted via Mobile Device

[thelonerife]

Might do it Saturday morning. Let me check w/ my buddy.

[aftamathe86]

OK just let me know and the rear end is five lug and coil spring
Posted via Mobile Device

[thelonerife]

cool. I'll let you know. Thanks!

[72bowtiestepper]

Originally Posted by aftamathe86

1972bowtiestepper blue is pending black will be 50 + shipping the drivers side someone put extra holes in it for screws instead of buying clips shipping is normally around 20-25 bucks but I will know for sure wed afternoon
Posted via Mobile Device

Thanks....let me know. I didn't know you had a black pair...the ones in your pic look blue. If not too much trouble, could you take a pic of the black ones so I could see the extra holes. I am interested.....the black ones on my 72 are trashed....some prev. owner cut a huge hole in them for speakers.

Glenn

[aftamathe86]

72bowtiestepper I can get better pictures some Time tomorrow there are about 4 or 5 extra holes around the outside
Posted via Mobile Device

[heidick70]

ill take the steering column and the ignition. please pm me details. thanks

[dirish]

Originally Posted by aftamathe86

Stringbean1073 did u want crank pulley as well if so that's 60 + shipping send me a pm with address and I'll box it up and get shipping price dirish took the brackets

Dirish I'll get it off tomorrow morning ad get a price on shipping i will pm u with total should fit in med flat rate box u want pump to or just brackets
Posted via Mobile Device

I just need brackets. Thanks Daniel
Posted via Mobile Device

[gdelaney]

Interested in the bumper. Send me price + ship to 55303 and your PP info.

Thanks,
Greg

[thelonerife]

Pm sent on pick up of bumper and rear end
Posted via Mobile Device

[aftamathe86]

Gdelaney bumper sold pending on pickup if he pass or up
Posted via Mobile Device

[aftamathe86]

72 bowtiestepper pm sent
Posted via Mobile Device

[dirish]

Originally Posted by stringbean1073

Interested in the brake booster if it comes with all the hardware and brackets (including brake pedal rod) and proportional valve. Also if no one gets the P/S brackets I'll take those and the crank pulley (short water pump I assume). Also interested in the bed front. Btw Im new to this site so if I'm doing this wrong please don't get mad at me, I'm a noob.

Welcome! Lots of good people here, a few not so good
Posted via Mobile Device

[stringbean1073]

Originally Posted by dirish

Welcome! Lots of good people here, a few not so good
Posted via Mobile Device

So far so good! I have been accepted by the community so far ,but have been on other forums that treated me like crap for not knowing all the unwritten rules of etiquette. Im restoring my first Chevy , a 1971 custom c10. This is my first restoration project. I hope to meet new friends on here.

[dirish]

Originally Posted by stringbean1073

So far so good! I have been accepted by the community so far ,but have been on other forums that treated me like crap for not knowing all the unwritten rules of etiquette. Im restoring my first Chevy , a 1971 custom c10. This is my first restoration project. I hope to meet new friends on here.

Lots of Tn. People on here. A event coming to White House Tn. In June
Hope you can make it. Info. Is on home page. 5150 is a organizer, he can answer your question if interested.
Posted via Mobile Device