TX 1970 Parts Suburban

[boynton]

Originally Posted by rtaylor60io

Looking for the right side rear seat to floor bracket ,the piece that bolts to the floor over seat tubing.

someone made their own bracket for this and it is welded to the seat....

[boynton]

Originally Posted by budnikguy

That could work...get me pics when you have the chance. I would like to keep any purchases i make here in the thread...NOT in PM,,,that is a forum no no.

I am new to this selling parts thing.....

I am wanting $300 for the front cross member which will include the spindles, springs, shocks, steering rack, a-arms, discs calipers, brake lines, steering box. Also will include the master w/ booster/prop valve. Basically everything to steer and stop (power steering pump will stay with the motor). I am cutting the front frame horns off to fix another truck, but i would give you the section of frame with everything attached and strapped down to a pallet you just have to pay freight. The truck runs and drives strait and stops well as it sits. Ill throw in the seat-belts and locks/ignition switch as well. The belts are dirty (came from a barn floor, but i think they will clean up. on has a crack on the buckle and the other is faded). hope that is the package deal you were looking for.

[boynton]

Originally Posted by DeadheadNM

How much for the cigarette lighter in the pic AND the harness? More pics possible? Thanks, Pete

$10 shipped and by harness do you mean the whole under the dash harness or just the single wire to run the cigarette lighter? if you want just the single wire ill include that.

[uncle]

You can sell them to 5150
Posted via Mobile Device

[6772king]

how much for the rear inner wheel wells,,, also does it have the black seatbelts??if so how much for everything??

[budnikguy]

I would be game, pending freight shipping cost. My business zip code is 92557. LMK what you find out regarding freight shipping cost...also, any idea what brand spoindles they are? and how do the pads and rotors look wear wise?

Adam

Originally Posted by boynton

I am new to this selling parts thing.....

I am wanting $300 for the front cross member which will include the spindles, springs, shocks, steering rack, a-arms, discs calipers, brake lines, steering box. Also will include the master w/ booster/prop valve. Basically everything to steer and stop (power steering pump will stay with the motor). I am cutting the front frame horns off to fix another truck, but i would give you the section of frame with everything attached and strapped down to a pallet you just have to pay freight. The truck runs and drives strait and stops well as it sits. Ill throw in the seat-belts and locks/ignition switch as well. The belts are dirty (came from a barn floor, but i think they will clean up. on has a crack on the buckle and the other is faded). hope that is the package deal you were looking for.

[boynton]

Originally Posted by budnikguy

I would be game, pending freight shipping cost. My business zip code is 92557. LMK what you find out regarding freight shipping cost...also, any idea what brand spoindles they are? and how do the pads and rotors look wear wise?

Adam

I will let you know mid next week in dfw with the lady for the weekend. Pads are about 30-40% and the discs are in great shape flat and smooth. Not sure on the spindles ill check when I get home.
Posted via Mobile Device

[boynton]

Originally Posted by 6772king

how much for the rear inner wheel wells,,, also does it have the black seatbelts??if so how much for everything??

I have two black shoulder belts $35 shipped rear inners are good but someone is interested in buying the shell and they will have to go with it. If that deal falls through ill let you know. I have a few blue lap belts-3 sets I believe $10 a set shipped if they can help you
Posted via Mobile Device

[DeadheadNM]

Originally Posted by boynton

$10 shipped and by harness do you mean the whole under the dash harness or just the single wire to run the cigarette lighter? if you want just the single wire ill include that.

I'd do that if it's the "lighted" lighter with its harness pending pics...I believe the lighted lighter had a dual wire harness (red and green wire IIRC).

[boynton]

Originally Posted by DeadheadNM

I'd do that if it's the "lighted" lighter with its harness pending pics...I believe the lighted lighter had a dual wire harness (red and green wire IIRC).

It is the lighted and I will include the harness/bulb pictures will be a few days since I am out of town.
Posted via Mobile Device

[botmfedr1]

Put me first in line for lower quarter panels, both DS & PS, in front and behind wheel wells.

Text message sent.

Thanks
Mondo
Posted via Mobile Device

[DeadheadNM]

Thanks - no rush on pics....

[too much stuff]

I will jump in line on black seat belts...

[boynton]

Rear door panels sold to 5150 will ship wednesday.
Posted via Mobile Device

[Maddoxdb]

Did the black seat belts sell? I will take them pending pics if not. Also still interested in spindles. Thanks, Dustin.
Posted via Mobile Device

[boynton]

Still need to take pics of the black seatbelts spindles sold pending shipping will get back with you tomorrow on the seatbelts
Posted via Mobile Device

[Bgrdmoose]

Still interested in the black rear cargo panels & the firewall plug above the throttle cable.
Posted via Mobile Device

[boynton]

Originally Posted by Bgrdmoose

Still interested in the black rear cargo panels & the firewall plug above the throttle cable.
Posted via Mobile Device

The black panels have speaker holes cut in them but are in decent shape. I will check on the firewall plug when I get home tonight.
Posted via Mobile Device

[BB72CHEVKT]

Interested in rear wheel wells to 75771.

[5150]

If he passes on the rear panels I might be interested.
Posted via Mobile Device

[71baggeddime]

I need the drivers side tail light sheet metal if your willin gto chop on it.

[JimH2828]

Looks like the grille is still available. Can you post pics of the outer and inner grille? Please show outer dents and scraps and inner cracks and brakes, etc.....

Thanks
JimH2828

[budnikguy]

If boynton cannot help you with that, I have a 72 Burb that you could get that patch panel off of.... you could cut to your needs....as i am fairly local to ya..

Adam
951-544-0721

Originally Posted by 71baggeddime

I need the drivers side tail light sheet metal if your willin gto chop on it.

[boynton]

Originally Posted by budnikguy

If boynton cannot help you with that, I have a 72 Burb that you could get that patch panel off of.... you could cut to your needs....as i am fairly local to ya..

Adam
951-544-0721

That would probably work a lot better for you sinve he is close and I am still hoping to sell the shell as a whole unit with the doors. I think it is in decent enough shape to do better as a replacement that to chop it up. I will put out a new message when/if I chop it up.
Posted via Mobile Device

[budnikguy]

Was kind of figuring that, but definitely was not meaning to step on your toes.
BTW, any chance to get a shipping quote on the front suspension for me?

Originally Posted by boynton

That would probably work a lot better for you sinve he is close and I am still hoping to sell the shell as a whole unit with the doors. I think it is in decent enough shape to do better as a replacement that to chop it up. I will put out a new message when/if I chop it up.
Posted via Mobile Device