Need Ideas "Boring Glove Box Door" - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SS Tim · 08-05-2013, 05:35 PM

The chromed door with the insert does look great and is similar to what I meant in my first post about using a Cheyenne Super glove box door trim panel and adding a black insert. That way you keep your original door and SPID intact by simply sticking the trim panel over your existing door. Plus it is reversable.

Now if you have not moved your 'vette emblem here is a photochopped relocation for your consideration.

leftybass209 · 08-05-2013, 10:00 PM

Quote:

Originally Posted by 96blazr

Here's what I did. It balances out the Dash. It's a Chrome door that a friend of mine covered in Vinyl.

+1 just about the cleanest look, with second being the Chevrolet emblem in the lower corner, IMO. These trucks have beautiful unique dashes, and its really easy to get carried away.
Posted via Mobile Device

DT1 · 08-05-2013, 11:10 PM

Quote:

Originally Posted by SS Tim

The chromed door with the insert does look great and is similar to what I meant in my first post about using a Cheyenne Super glove box door trim panel and adding a black insert. That way you keep your original door and SPID intact by simply sticking the trim panel over your existing door. Plus it is reversable.

Now if you have not moved your 'vette emblem here is a photochopped relocation for your consideration.

Ok, you convinced me.
I'm going to move it. When I get time I'll do the chrome with the black camera finish.

OregonNed · 08-05-2013, 11:28 PM

That is sweet, leftybass!

colin_havens · 08-06-2013, 12:42 AM

I havent seen it done on our trucks, but I have seen Stacy David use guitar puckguard material as a background for some gauges on the dash of a car he built. I have always thought that it would be cool to have some cut to work on my gauge bezel and another to match for the glovebox door. Something like this:

magwakeenercew2jh · 08-06-2013, 01:59 AM

Quote:

Originally Posted by DT1

Ok, I thought I'd try this. I know it's probably sacrilegious to the purist but I just wanted something a bit more unobtrusive or delicate so to speak.

Cool.

**Already Gone** · 08-06-2013, 03:20 AM

Subscribed

DT1 · 08-06-2013, 08:57 AM

Quote:

Originally Posted by magwakeenercew2jh

Cool.

Not good to wake up to...
I just threw up in my mouth.

"Unobtrusive" not pretentious.

Time to kill this thread.

magwakeenercew2jh · 08-06-2013, 12:25 PM

Quote:

Originally Posted by DT1

I just threw up in my mouth.

Hahahaha!

leftybass209 · 08-06-2013, 12:33 PM

Quote:

Originally Posted by colin_havens

I havent seen it done on our trucks, but I have seen Stacy David use guitar puckguard material as a background for some gauges on the dash of a car he built. I have always thought that it would be cool to have some cut to work on my gauge bezel and another to match for the glovebox door. Something like this:

One company I know of for sure that sells flat sheets of pickguard material is www.warmoth.com. they have pearloid, tortishell, and solids in a variety of colors, and layers. You can pick up a white black white three layer for instance, to give the rim a black pinstripe.
Posted via Mobile Device
Posted via Mobile Device

bruceman1968 · 08-06-2013, 05:07 PM

DT1, how about having a vinyl photo made for the GB door at a sign shop? You could have any picture you want made in vinyl, trim it out, and just stick it on the door. If you got tired of it, it will peel right off. You could even put the cool Chevy emblem on top.

Name: $(KGrHqF,!h8FEZmIZ00pu60BRMZz2B-qw~~_4.jpg
Views: 760
Size: 81.2 KB

Name: $(KGrHqF,!h8FEZmIZ00pu60BRMZz2B-qw~~_4.jpg
Views: 760
Size: 81.2 KB

Name: $(KGrHqF,!h8FEZmIZpu60kBRMZz2B-qw~~_4.jpg
Views: 755
Size: 83.6 KB

Name: $(KGrHqF,!h8FEZmIZpu60BRjjMZz2B-qw~~_4.jpg
Views: 747
Size: 85.3 KB

Name: $(KGrHqF,!h8FEZmIZpu60BRhMZz2B-qw~~_4.jpg
Views: 754
Size: 99.0 KB

magwakeenercew2jh · 08-06-2013, 05:43 PM

Quote:

Originally Posted by bruceman1968

DT1, how about having a vinyl photo made for the GB door at a sign shop? You could have any picture you want made in vinyl, trim it out, and just stick it on the door. If you got tired of it, it will peel right off. You could even put the cool Chevy emblem on top.

Nice ones.

How about having two?...Change them for the seasons.

bruceman1968 · 08-06-2013, 05:48 PM

That's funny, How about a pic of the inside of the GB. That way you don't have to open it up to see what's inside.

Name: $(KGrHqF,!h8FEZmIZpum60BRMZz2B-qw~~_4.jpg
Views: 811
Size: 90.4 KB

If they were made up in vinyl with a magnetic backing, you could change it everyday.

leftybass209 · 08-06-2013, 06:05 PM

Okay Bruceman, the overlay with the inside of the glovebox is funny. I can see a spouse breaking her nails as she tries to reach in there!

DT1 · 08-06-2013, 06:13 PM

Quote:

Originally Posted by bruceman1968

That's funny, How about a pic of the inside of the GB. That way you don't have to open it up to see what's inside.

Attachment 1138597

If they were made up in vinyl with a magnetic backing, you could change it everyday.

Alright...Who stole my fire extinguisher?

bruceman1968 · 08-06-2013, 06:39 PM

magwakeenercew2jh, just noticed the Chevy emblem you put on the girl. Good One.

Scott>72-GMC · 08-06-2013, 07:02 PM

Can't wait to get mine done to show u guys. But you will have to wait for now
Posted via Mobile Device

67_C-30 · 08-06-2013, 08:57 PM

I used a Cheyenne Super insert and painted the vinyl part with spray in bedliner to match the texture of the driver's side and used a '67 - '68 emblem on my '69 C-10.

http://67-72chevytrucks.com/vboard/s...d.php?t=299203

DT1 · 08-06-2013, 09:33 PM

Quote:

Originally Posted by 67_c-30

i used a cheyenne super insert and painted the vinyl part with spray in bedliner to match the texture of the driver's side and used a '67 - '68 emblem on my '69 c-10.

http://67-72chevytrucks.com/vboard/s...d.php?t=299203

winner!!!

mud.man.rj · 08-06-2013, 09:40 PM

A lot of good ideas, the hot girl may take away train of thought, like the script and last one best, choices.

**Already Gone** · 08-07-2013, 12:55 AM

I like the last one as well, but would like it to be 1/2 as long.

SS Tim · 08-07-2013, 01:50 AM

Quote:

Originally Posted by DT1

winner!!!

Cool what do I win?
Money, vacation, dog food or a bucket of rust?
Refer to posts #4 and 26. :-)

67_C-30 · 08-07-2013, 07:36 AM

Quote:

Originally Posted by SS Tim

Cool what do I win?
Money, vacation, dog food or a bucket of rust?
Refer to posts #4 and 26. :-)

AHEM!!! I think he said I was the winner!!! -LOL

sduckworth13 · 01-14-2014, 02:23 PM

Here is my glovebox door I just finished. I used a Chevrolet script off a valve cover for my insert.

88fordf150 · 01-14-2014, 05:02 PM

Quote:

Originally Posted by 96blazr

Here's what I did. It balances out the Dash. It's a Chrome door that a friend of mine covered in Vinyl.

I really like this look!

08-05-2013, 05:35 PM	#26
SS Tim Registered User Join Date: Aug 2010 Location: Edwards, CA Posts: 7,503	Re: Need Ideas "Boring Glove Box Door" The chromed door with the insert does look great and is similar to what I meant in my first post about using a Cheyenne Super glove box door trim panel and adding a black insert. That way you keep your original door and SPID intact by simply sticking the trim panel over your existing door. Plus it is reversable. Now if you have not moved your 'vette emblem here is a photochopped relocation for your consideration. Attached Images __________________ Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID Blazer SPID Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders Do you have a 1972 Plaid Pickup? Plaid Blazer ** Plaid Suburban

08-05-2013, 11:28 PM	#29
OregonNed Registered User Join Date: Dec 2012 Location: Vancouver, Washington Posts: 1,644	Re: Need Ideas "Boring Glove Box Door" That is sweet, leftybass! __________________ 1968 Chevrolet C/10 LWB - 327, TH350 - 4/5 Drop

08-06-2013, 12:42 AM	#30
colin_havens Registered User Join Date: Dec 2007 Location: Mountain Home, AR Posts: 405	Re: Need Ideas "Boring Glove Box Door" I havent seen it done on our trucks, but I have seen Stacy David use guitar puckguard material as a background for some gauges on the dash of a car he built. I have always thought that it would be cool to have some cut to work on my gauge bezel and another to match for the glovebox door. Something like this:

08-06-2013, 03:20 AM	#32
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,144	Re: Need Ideas "Boring Glove Box Door" Subscribed __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021

08-06-2013, 05:07 PM	#36
bruceman1968 Registered User Join Date: Oct 2009 Location: Tampa Bay Posts: 1,549	Re: Need Ideas "Boring Glove Box Door" DT1, how about having a vinyl photo made for the GB door at a sign shop? You could have any picture you want made in vinyl, trim it out, and just stick it on the door. If you got tired of it, it will peel right off. You could even put the cool Chevy emblem on top. __________________ CHEVY/GMC VIN DECODERS

08-06-2013, 05:48 PM	#38
bruceman1968 Registered User Join Date: Oct 2009 Location: Tampa Bay Posts: 1,549	Re: Need Ideas "Boring Glove Box Door" That's funny, How about a pic of the inside of the GB. That way you don't have to open it up to see what's inside. If they were made up in vinyl with a magnetic backing, you could change it everyday. __________________ CHEVY/GMC VIN DECODERS Last edited by bruceman1968; 08-06-2013 at 06:05 PM.

08-06-2013, 06:05 PM	#39
leftybass209 Registered User Join Date: Feb 2011 Location: Modesto, CA Posts: 2,189	Re: Need Ideas "Boring Glove Box Door" Okay Bruceman, the overlay with the inside of the glovebox is funny. I can see a spouse breaking her nails as she tries to reach in there!

08-06-2013, 06:39 PM	#41
bruceman1968 Registered User Join Date: Oct 2009 Location: Tampa Bay Posts: 1,549	Re: Need Ideas "Boring Glove Box Door" magwakeenercew2jh, just noticed the Chevy emblem you put on the girl. Good One. __________________ CHEVY/GMC VIN DECODERS

08-06-2013, 07:02 PM	#42
Scott>72-GMC Registered User Join Date: Jan 2013 Location: New providence ia Posts: 1,018	Re: Need Ideas "Boring Glove Box Door" Can't wait to get mine done to show u guys. But you will have to wait for now Posted via Mobile Device __________________ 72 GMC super custom.

08-06-2013, 08:57 PM	#43
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: Need Ideas "Boring Glove Box Door" I used a Cheyenne Super insert and painted the vinyl part with spray in bedliner to match the texture of the driver's side and used a '67 - '68 emblem on my '69 C-10. http://67-72chevytrucks.com/vboard/s...d.php?t=299203 __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club!

08-06-2013, 09:40 PM	#45
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: Need Ideas "Boring Glove Box Door" A lot of good ideas, the hot girl may take away train of thought, like the script and last one best, choices. __________________ 1987 Green n Green machine. 5.0 4spd std. 7" lift w 35's.

08-07-2013, 12:55 AM	#46
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,144	Re: Need Ideas "Boring Glove Box Door" I like the last one as well, but would like it to be 1/2 as long. __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021

01-14-2014, 02:23 PM	#49
sduckworth13 Registered User Join Date: Mar 2011 Location: Kansas City, Missouri Posts: 3,541	Re: Need Ideas "Boring Glove Box Door" Here is my glovebox door I just finished. I used a Chevrolet script off a valve cover for my insert. Attached Images __________________ Scott

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.