AL 69 Custom Camper getting parted. A/C, ps

[DeadheadNM]

Saddle defrost vents? If so interested - thanks.

[Oddfire]

What shape are the armrests in?

[JQ-72]

Bgrdmoose - spring was broken
Rumbler - I'll get pics tomorrow, they are 3/4 ton
swamp rat - I pulled all the springs off the seat, I'll post a pic. tomorrow
JimH - brake portioning valve with brace $15. Column is already pulled an ready to ship if you want it. Price is in original post.
W31 - No auxiliary springs
Sandemonium - I don't have any extra pulleys
Mo - underhood & engine wiring - $50 shipped to you. A few cuts and splices, but overall good harnesses.
Gary - let me examine the dash pad closer. I may keep it for my 50th, but I'll let you know.
Bcrouch - rear end is Dana 4.10.
1968SWB - $35 shipped to you.
Oddfire - On the mirrors, SPID says West Coast mirror DG4
Deadhead - Defrost vents are more gold than saddle.

[DeadheadNM]

Will pass then - thanks. Pete

[mo]

Ok thanks. Ill pass I need one in great shape
Posted via Mobile Device

[swamp rat]

I just posted with a few pic's of what i need but it didn't cone thru, i'm also looking for the side support "V" springs on both sides. and also looking for the wire or rod that ties the two tracks together for the slide adjust, i also need the spring and clip they terminate too, i'll send you a PM with some pic's.

[JimH2828]

Joshua, we are almost there. Wanted your thoughts on 1 and 2 and added 3 and 4.

1) A/C box fiberglass pieces, with ball thingy - $40
Note: I haven't been through my AC yet so I do not know what kind of condition it's in, perhaps I should grab other parts, what would you recommend. Right price, I would certainly do more.
2) Firewall grommets
Note: any decent ones?
3) Air cleaner spacer with hose and PCV $?
4) Carburetor center stub bolt $?
5) Valve covers with oil cap and PCVs - $10
6) Electrical junction - $0
7) Ash tray $0
8) Steering column with all mount parts - rag joint back to steering wheel nut $75
Note: I don't need the steering wheel or horn cap.
9) Brake portioning valve\distribution block with bracket parts $15.
Note: please leave on the two short upper brake lines.



Thanks
Jim

[JQ-72]

swamp rat - There was only 1 spring like the one you posted. Seat track cable was homemade with wire.

JimH -
1) Just let me know what you need on the A/C stuff. I junked out another A/C truck last month a have most of the air stuff left. Problem areas are top slide lever on controller head, diverter flapper is usually broken, not sure what else. Just let me know what you need.
2) Most of the grommets were not usable.
3) Air cleaner spacer - I've got just a metal spacer with no rubber hose. $10
4) Carb bolt - $3

[JQ-72]

Sorry guys, I'm going to have to put this thread on hold for a week. My family and I are headed to the beach for vacation.
Also, a teenage girl ran into my trailer yesterday and totaled it! I've been on the phone with insurance agents and witnesses today and will be again tomorrow. Sorry to all who are waiting on pictures - it's been a stressful few says. I'll post pictures of the wreck when I get back...
Joshua

[JimH2828]

Joshua, no rush, get yourself situated.

1) A/C box fiberglass pieces, with ball thingy - $40
- top slide lever on controller head
- diverter flap
Maybe a picture of the AC stuff would help me decide what I want.
2) Valve covers with oil cap and PCVs - $10
3) Electrical junction - $0
4) Ash tray $0
5) Steering column with all mount parts - rag joint back to steering wheel nut $75
Note: I don't need the steering wheel or horn cap.
6) Brake portioning valve\distribution block with bracket parts $15.
Note: please leave on the two short upper brake lines.
7) Carb bolt - $3


Thanks
Jim

[puppyluppy]

Does the truck have power steering and a dual battery? If it did, I need the {unique to big blocks trucks that have these two options) bracket that holds the PS reservoir out of the way of the aux. battery. PuppyLuppy

[Ozark Tim]

Joshua
Not sure if you are selling parts off the motor but I am looking for the two long bolts that mount the Q jet to the intake (front two bolts)
I know it isn't much in the way of a sale but sure could use them if you want to sell them.
Thx
Tim

[liftmeup]

I will take the mirrors if there decent, dont need to be perfect just good

[kmaz]

I want all the ac and heat components. I'll send you San email. Thank you
Posted via Mobile Device

[D_G_R_E_EN]

emblems still up for sale ? can i get a pic sent to 7405020963 thanks

[danitodanny]

I'm interested in the front grill please! Text me at 305 979 9555
Posted via Mobile Device

[JQ-72]

OK, I'm back.
JimH - A/C controller head with good levers - $35. Both diverter boxes I have are flimsy and wont seal off when open or closed.
puppyluppy - I know the bracket you are talking about and it did not have it.
OzarkTim - I've got some correct front (longer) carb bolts. $15 shipped to you.
liftmeup - mirrors are good for driver - minor scratch on one and bolt broke off the other and p.o. welded it up. Both mirror heads are good and not cracked. $40 shipped to you.
kmaz - not sure if you want it all or not. It will all need work. First, I would price it without compressor and brackets. Also, the heater core was bypassed, so it probably leaks. It's all there, but would need some work before being operable. LMK.
DGREEN - emblems still available - pics below. Not bad pitted, just paint overspray.
danny - grill went with the truck to scrap heaven. It was shiny, but has lots of scratches and dents.
JQ

[JQ-72]

liftmeup - pics of mirrors.

[Sandemonium]

Originally Posted by Sandemonium

Do you have a 3 groove crankshaft pulley and power steering pulley for an A/C truck?

Thank you.
Posted via Mobile Device

Joshua,

Do you happen to have the pulleys listed above?
Bob
Posted via Mobile Device

[JQ-72]

Yes, they are available now. I had the complete motor sold, but the deal fell through. I'll get a picture tomorrow and make sure it's what you are needing.
Joshua

Originally Posted by Sandemonium

Joshua,

Do you happen to have the pulleys listed above?
Bob
Posted via Mobile Device

[JQ-72]

6t727t2 - A/C brackets - $90 shipped to you.

[JQ-72]

More stuff:
4 core radiator hold downs: $25 shipped.
Wiring: Engine - nice, just cut at starter. $30 shipped. Headlight - nice and uncut - $30 shipped. Interior with fuse panel - a few wires cut at ignition switch and dimmer pigtail spliced in. $30 shipped. Taillight. nice and not cut up for trailer lights. small spot on tag light wire where jacket was removed for a splice but not cut. 67-69 style with side marker delete. $30 shipped.
7 blade clutch fan - $50 shipped to you.

[JQ-72]

fan

[71sierragrande]

I'll take the glovebox door if available
Posted via Mobile Device

[JQ-72]

71sierra - $20 for the glovebox door with emblem. $18 shipping since it's going across the country.

Also available - nice, uncut A/C dash. one small rust spot on outer lip - this will be covered up by windshield weather stripping when installed. $100 + shipping.