LS Swap Electric Speedo face and template - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

woodwright · 06-27-2014, 02:52 AM

I better grab one too. Thanks.

ls1nova71 · 06-27-2014, 09:24 AM

Quote:

Originally Posted by Oldswrench

Ok lay one on me
Mark
336-601-4641

Quote:

Originally Posted by woodwright

I better grab one too. Thanks.

I ordered more a week or so ago, going to go to the printer today and see if they're ready. Ill let you guys know.

MalibuSSwagon · 06-28-2014, 12:32 PM

Did you know the 91-93 Caprice had an electric sweep speedo? Could work for a swap in an older sweep style speedo

TypeSL2 · 06-28-2014, 03:21 PM

I am trying to do that exact swap at the moment. A friend found this cluster on ebay for $37, so I figured I would give it a shot. I am going to use all of the gauges out of the cluster since I would have to have a new gas gauge anyways. I will hopefully know soon whether or not this will work.

A pic of my progress thus far.

All wires going to a connector on the back to make for easy removal of the cluster if need be.

James

TypeSL2 · 06-28-2014, 03:23 PM

Also forgot to post this pic up. Will have to cut a new plate to allow for the odometer and trip meter to be seen. Also gotta figure out how to get the gas gauge to swing the proper direction. All in due time.

James

ls1nova71 · 06-28-2014, 06:06 PM

Quote:

Originally Posted by MalibuSSwagon

Did you know the 91-93 Caprice had an electric sweep speedo? Could work for a swap in an older sweep style speedo

No, I did not. Thats some good info though!

TypeSL2, nice job so far!

On a side note, this should probably be in the speedo thread in the LS swap section rather than the for sale area. I don't mind much but the mods frown on it.

TypeSL2 · 06-28-2014, 07:57 PM

Woops. That is my bad. I will add my stuff to the speedo thread later tonight?

James

gord63 · 07-01-2014, 06:55 PM

Hello,

I would like to get two kits if any are still available. Please send me a link for payment or address to send a money order.

Thanks,

g

ls1nova71 · 07-07-2014, 10:28 PM

Quote:

Originally Posted by ls1nova71

I ordered more a week or so ago, going to go to the printer today and see if they're ready. Ill let you guys know.

Quote:

Originally Posted by gord63

Hello,

I would like to get two kits if any are still available. Please send me a link for payment or address to send a money order.

Thanks,

g

Went by the printer and he said his machine that cuts out the number parts of the stencils was not working. He said to check back tomorrow, HOPEFULLY I'll have them soon. Sorry everyone for it taking so long.

Oldswrench · 07-08-2014, 06:58 AM

No worries its a hobby not a life or death sort of thing. When it gets here it gets here.
Thanks
Mark

ls1nova71 · 07-09-2014, 10:28 AM

Got the new batch today, and PMs have been sent to everyone who has asked about them.

mcbassin · 07-09-2014, 04:20 PM

For the record mine turned out great thanks ls1nova71!

**TBONE1964** · 07-14-2014, 08:02 PM

Quote:

Originally Posted by mcbassin

For the record mine turned out great thanks ls1nova71!

Very nice work. I hope to get mine started sometime soon.

**TBONE1964** · 07-14-2014, 08:06 PM

Eric,

I got everything in the mail today. I am looking forward to having the time to build a couple of these clusters. Thank you again for everything.

Take care,
Tom

woodwright · 07-15-2014, 02:33 AM

Got my stuff too. It looks great. I still gotta get the speedo and the box. Thanks.

72dmax4x4 · 09-19-2014, 10:28 AM

still available? if so i need 2

Chuck Burg · 09-20-2014, 09:15 AM

I need 1 also

ls1nova71 · 09-23-2014, 11:27 AM

Quote:

Originally Posted by 72dmax4x4

still available? if so i need 2

Quote:

Originally Posted by Chuck Burg

I need 1 also

I will be putting in another order for more, but it may take a week or two. I will PM you guys when I get them. Thanks for your interest, Eric

72dmax4x4 · 09-29-2014, 01:06 PM

thank you!

johnyoung · 10-12-2014, 08:57 PM

I need one too. Let me know when you have them ready to ship and how you want payment. thanks John Young London, Ky.

68shortfleet · 10-21-2014, 05:42 AM

I need one of these also. Not in a big hurry though, please PM me when you have a "kit" available.

Thanks
Jason

**dayj1** · 02-07-2015, 08:36 AM

Are these still available? If so, I need one.

ls1nova71 · 02-08-2015, 12:41 AM

Quote:

Originally Posted by dayj1

Are these still available? If so, I need one.

I dont have any left, and am not sure I am going to be able to get any more. I had ordered another run of them,, but apparently the machine the printer was using to cut out the templates is old and out dated enough that the blades for it are obsolete. He cant make the templates any more, and without them, there's no way to do the numbers on the lens. I am looking for someone else who can do them but so far no luck.

ls1nova71 · 04-01-2015, 11:37 PM

Update: Thanks to dayj1, I am back in business for the time being, still looking for somewhere local to have these made, but for now I have several sets available if anyone is interested.

Thanks, Eric

treeboy97 · 04-14-2015, 11:28 AM

I am interested in a set, thanks

06-27-2014, 02:52 AM	#26
woodwright Enjoying left field Join Date: Jun 2008 Location: Dillon Montana Posts: 900	Re: LS Swap Electric Speedo face and template I better grab one too. Thanks. __________________ Clint 70 Chevy 4WD "Ultimate Work Truck" SOLD

06-28-2014, 12:32 PM	#28
MalibuSSwagon Registered User Join Date: Sep 2009 Location: Weare,NH Posts: 1,592	Re: LS Swap Electric Speedo face and template Did you know the 91-93 Caprice had an electric sweep speedo? Could work for a swap in an older sweep style speedo __________________ Eric 1992 Oldsmobile Custom Cruiser 1986 Chevrolet C10\|5.3L\|TKO600\|Shortbed\|Custom Deluxe 1983 Malibu Wagon\|TPI 305\|T5 5 speed\|3.73 non-posi

06-28-2014, 03:21 PM	#29
TypeSL2 Registered User Join Date: Jul 2013 Location: Nashville, TN Posts: 216	Re: LS Swap Electric Speedo face and template I am trying to do that exact swap at the moment. A friend found this cluster on ebay for $37, so I figured I would give it a shot. I am going to use all of the gauges out of the cluster since I would have to have a new gas gauge anyways. I will hopefully know soon whether or not this will work. A pic of my progress thus far. All wires going to a connector on the back to make for easy removal of the cluster if need be. James __________________ '64 C10 Build Officially LQ/NV3500 swapped and Bagged

06-28-2014, 03:23 PM	#30
TypeSL2 Registered User Join Date: Jul 2013 Location: Nashville, TN Posts: 216	Re: LS Swap Electric Speedo face and template Also forgot to post this pic up. Will have to cut a new plate to allow for the odometer and trip meter to be seen. Also gotta figure out how to get the gas gauge to swing the proper direction. All in due time. James __________________ '64 C10 Build Officially LQ/NV3500 swapped and Bagged

06-28-2014, 07:57 PM	#32
TypeSL2 Registered User Join Date: Jul 2013 Location: Nashville, TN Posts: 216	Re: LS Swap Electric Speedo face and template Woops. That is my bad. I will add my stuff to the speedo thread later tonight? James __________________ '64 C10 Build Officially LQ/NV3500 swapped and Bagged

07-01-2014, 06:55 PM	#33
gord63 Registered User Join Date: May 2014 Location: Plainville, MA Posts: 5	Re: LS Swap Electric Speedo face and template Hello, I would like to get two kits if any are still available. Please send me a link for payment or address to send a money order. Thanks, g

07-08-2014, 06:58 AM	#35
Oldswrench Registered User Join Date: Dec 2010 Location: Kernersville, NC Posts: 31	Re: LS Swap Electric Speedo face and template No worries its a hobby not a life or death sort of thing. When it gets here it gets here. Thanks Mark

07-09-2014, 10:28 AM	#36
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,118	Re: LS Swap Electric Speedo face and template Got the new batch today, and PMs have been sent to everyone who has asked about them. __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

07-09-2014, 04:20 PM	#37
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: LS Swap Electric Speedo face and template For the record mine turned out great thanks ls1nova71! __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

07-14-2014, 08:06 PM	#39
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	Re: LS Swap Electric Speedo face and template Eric, I got everything in the mail today. I am looking forward to having the time to build a couple of these clusters. Thank you again for everything. Take care, Tom __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C

07-15-2014, 02:33 AM	#40
woodwright Enjoying left field Join Date: Jun 2008 Location: Dillon Montana Posts: 900	Re: LS Swap Electric Speedo face and template Got my stuff too. It looks great. I still gotta get the speedo and the box. Thanks. __________________ Clint 70 Chevy 4WD "Ultimate Work Truck" SOLD

09-19-2014, 10:28 AM	#41
72dmax4x4 Registered User Join Date: Jul 2011 Location: san antonio tx Posts: 5	Re: LS Swap Electric Speedo face and template still available? if so i need 2 __________________ 69 GMC Cust Camp(flatbed)k20 Np205 D60s/NV4500 LQ9 Part Gathering Stage 69 GMC C20 350(with a cam n stuff/400 72 Sierra Grande 402/400/LPG 65 Impala 283/PG 4D HT 4wheel discs 05 GTO LS2/T56-02 Silv 6.6/ZF6-82 K5 8.1/NV4500/208 D44(8 lugged)

09-20-2014, 09:15 AM	#42
Chuck Burg Registered User Join Date: Jul 2014 Location: Arlington, WA Posts: 242	Re: LS Swap Electric Speedo face and template I need 1 also

09-29-2014, 01:06 PM	#44
72dmax4x4 Registered User Join Date: Jul 2011 Location: san antonio tx Posts: 5	Re: LS Swap Electric Speedo face and template thank you! __________________ 69 GMC Cust Camp(flatbed)k20 Np205 D60s/NV4500 LQ9 Part Gathering Stage 69 GMC C20 350(with a cam n stuff/400 72 Sierra Grande 402/400/LPG 65 Impala 283/PG 4D HT 4wheel discs 05 GTO LS2/T56-02 Silv 6.6/ZF6-82 K5 8.1/NV4500/208 D44(8 lugged)

10-12-2014, 08:57 PM	#45
johnyoung Registered User Join Date: May 2010 Location: London, Kentucky Posts: 88	Re: LS Swap Electric Speedo face and template I need one too. Let me know when you have them ready to ship and how you want payment. thanks John Young London, Ky.



Register or Log In To remove these advertisements.

10-21-2014, 05:42 AM	#46
68shortfleet Registered User Join Date: Oct 2006 Location: Dundee, Oregon Posts: 311	Re: LS Swap Electric Speedo face and template I need one of these also. Not in a big hurry though, please PM me when you have a "kit" available. Thanks Jason

02-07-2015, 08:36 AM	#47
dayj1 Senior Member Join Date: Jul 2009 Location: Athens, AL Posts: 499	Re: LS Swap Electric Speedo face and template Are these still available? If so, I need one.

04-01-2015, 11:37 PM	#49
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,118	Re: LS Swap Electric Speedo face and template Update: Thanks to dayj1, I am back in business for the time being, still looking for somewhere local to have these made, but for now I have several sets available if anyone is interested. Thanks, Eric __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

04-14-2015, 11:28 AM	#50
treeboy97 Registered User Join Date: May 2009 Location: Waynesville, Ohio Posts: 136	Re: LS Swap Electric Speedo face and template I am interested in a set, thanks __________________ 1970 C10 LWB (Grandfather's Truck) 5.3 4L60E 2012 Victory Cross Country Touring I'm not wasting money on my truck/bike, I'm helping to rescue the economy one mod at a time.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.