Think im going with 22s - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

xfsketch · 12-14-2013, 08:14 PM

I know the stance is all off but im thinking 22s out back 20s up front. Eventually liwering it so the rear rims have a slight lip. Fronts just under fender line.

Andy4639 · 12-14-2013, 09:28 PM

I like it. Looks good.

xfsketch · 12-14-2013, 10:48 PM

TY Andy! I feel dumb changong my mind everyday lol. I might just go 20s all around like this truck. Nastyc10s wheel tire combo looks nice too.
http://67-72chevytrucks.com/vboard/s...d.php?t=430300

xfsketch · 12-14-2013, 10:51 PM

2500hd has a similar setup. Im going to photoshop chop them them on my truck.

cool68 · 12-14-2013, 11:13 PM

so, lots of info on big wheels and drops - but, what about brake upgrades to help the wheel look better than with tiny stock brakes, and to help stop all of the momentum the big wheels/ tires give?

xfsketch · 12-14-2013, 11:28 PM

Brake upgrade needed indeed. My rear drums got to go eventually

xfsketch · 12-14-2013, 11:36 PM

20s all around. It dont look bad

xfsketch · 12-14-2013, 11:40 PM

The fronts should be fine right? If i go 20x8.5 and 20x10 should the front brakes be ok as is?

xfsketch · 12-14-2013, 11:48 PM

The above chop is based off
Front 20X8.5 Coys 5.25 inch bs Toyo 255/40/20
Rear 20X10 Coys 5.5 inch bs Toyo 295/40/40
4 5/6 drop

xfsketch · 12-15-2013, 12:21 AM

Front 20X8.5 boss 5.25 inch bs 255/40/20
Rear 20X9 boss 5.25 inch bs 295/40/40
4 5/6 drop

xfsketch · 12-15-2013, 12:24 AM

I heard i would have to grind down the hubs in the front to fit these wheels.

xfsketch · 12-15-2013, 12:47 AM

Yereka! I think i know what i want fer sure! Heres another persons ride i modified to have eagle alloys 20x8.5 front and 20x10 backs with 4/6 drop? What sized tires i dunno. But this is my end result i want my truck to look like this!

Artikgrau325is · 12-15-2013, 02:45 AM

I want to see 22's in the rear with a meaty sidewall, and 20's up front. Whole truck would be lowered, I'm just trying to set up a nice muscle truck thing I'm trying to picture in my mind haha.

xfsketch · 12-15-2013, 04:45 PM

I will chop one up with 22s on the back

Milestone67GMC · 12-27-2013, 02:20 AM

Hey!! My name is Michael, I am new to this forum.

I have a 67 GMC lwb that is lowered 5"s

I have just though this last week put 22" Caddy Rims on her all the way around.

22x10s to be exact
285x45 front
305x45 rear

I also at the same time put 1 1/4'' spacers in the front and 1 1/2'' in the rear.

the pictures are not the best i just took these.

68 Longbed Dan · 12-27-2013, 11:18 AM

Here's my two cents, take it for what it's worth :P

If you do 20's all around, get the truck as low as possible and make sure you have more meat on the rear. Otherwise, the sizes look different as the rear well looks larger with the truck sitting a bit higher in the rear.

OR... if the truck is static drop, I prefer seeing 20's up front and 22's out back. Just fills it out better (again, unless it's level).

Yea..... that's my...uh... "professional" opinion.... from a guy that works in the natural gas industry lol.

fastnotch89 · 12-27-2013, 07:32 PM

I ran 22's front and rear... 4/6 drop with a 1 1/2 block also

markiemark · 12-27-2013, 07:50 PM

Quote:

Originally Posted by fastnotch89

I ran 22's front and rear... 4/6 drop with a 1 1/2 block also

Looks great!!!!! How is it running 22" up front?

YBNORML · 12-28-2013, 01:43 AM

20/22 with a 6/7 drop. This how it sits with the roof on. When it's topless, which is 90% of the time, the tire to fender well space is even.

C10_ustacould · 12-28-2013, 02:02 AM

@YBNORML- I think you should just drop that beautiful Blazer off at my house! So sweet!!

fastnotch89 · 12-28-2013, 10:37 AM

Quote:

Originally Posted by markiemark

Looks great!!!!! How is it running 22" up front?

It doesn't rub.. Rides great

69moneypit · 12-28-2013, 10:52 AM

Mines are 20 all around with a 3/5 . Soon to be replaced with bags and 22s. On pic passenger front was higher due to a problem with spring after oil change . Noticed it after I made it to a cruise in!!!!

ksbrktracer · 12-28-2013, 11:02 AM

If you need some help with choices .... holler at us , We do alot of them and we sell almost all the brands you posted including the Fooses.

YBNORML · 12-28-2013, 04:31 PM

Quote:

Originally Posted by Bucks68

@YBNORML- I think you should just drop that beautiful Blazer off at my house! So sweet!!

Thanks, this ones gonna be here for a long time

xfsketch · 01-04-2014, 12:29 AM

I am back n forth trying to figure some nice wheels for my ride. Im looking at a cheap alternative on craigslist. 22" Starr rims with he said a 50 series tire same size all around. 600 bucks they look nice. Do you think they will fit?
http://cleveland.craigslist.org/cto/4199051169.html

12-14-2013, 08:14 PM	#26
xfsketch 72 fleetside longbed 350 Join Date: Feb 2006 Location: Ohio Posts: 169	Re: Think im going with 22s I know the stance is all off but im thinking 22s out back 20s up front. Eventually liwering it so the rear rims have a slight lip. Fronts just under fender line.

12-14-2013, 09:28 PM	#27
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Think im going with 22s I like it. Looks good. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

12-14-2013, 10:48 PM	#28
xfsketch 72 fleetside longbed 350 Join Date: Feb 2006 Location: Ohio Posts: 169	Re: Think im going with 22s TY Andy! I feel dumb changong my mind everyday lol. I might just go 20s all around like this truck. Nastyc10s wheel tire combo looks nice too. http://67-72chevytrucks.com/vboard/s...d.php?t=430300

12-14-2013, 10:51 PM	#29
xfsketch 72 fleetside longbed 350 Join Date: Feb 2006 Location: Ohio Posts: 169	Re: Think im going with 22s 2500hd has a similar setup. Im going to photoshop chop them them on my truck.

12-14-2013, 11:13 PM	#30
cool68 Registered User Join Date: Oct 2013 Location: Stockton, CA Posts: 475	Re: Think im going with 22s so, lots of info on big wheels and drops - but, what about brake upgrades to help the wheel look better than with tiny stock brakes, and to help stop all of the momentum the big wheels/ tires give?

12-14-2013, 11:28 PM	#31
xfsketch 72 fleetside longbed 350 Join Date: Feb 2006 Location: Ohio Posts: 169	Re: Think im going with 22s Brake upgrade needed indeed. My rear drums got to go eventually

12-14-2013, 11:36 PM	#32
xfsketch 72 fleetside longbed 350 Join Date: Feb 2006 Location: Ohio Posts: 169	Re: Think im going with 22s 20s all around. It dont look bad

12-14-2013, 11:40 PM	#33
xfsketch 72 fleetside longbed 350 Join Date: Feb 2006 Location: Ohio Posts: 169	Re: Think im going with 22s The fronts should be fine right? If i go 20x8.5 and 20x10 should the front brakes be ok as is?

12-14-2013, 11:48 PM	#34
xfsketch 72 fleetside longbed 350 Join Date: Feb 2006 Location: Ohio Posts: 169	Re: Think im going with 22s The above chop is based off Front 20X8.5 Coys 5.25 inch bs Toyo 255/40/20 Rear 20X10 Coys 5.5 inch bs Toyo 295/40/40 4 5/6 drop

12-15-2013, 12:21 AM	#35
xfsketch 72 fleetside longbed 350 Join Date: Feb 2006 Location: Ohio Posts: 169	Re: Think im going with 22s Front 20X8.5 boss 5.25 inch bs 255/40/20 Rear 20X9 boss 5.25 inch bs 295/40/40 4 5/6 drop

12-15-2013, 12:24 AM	#36
xfsketch 72 fleetside longbed 350 Join Date: Feb 2006 Location: Ohio Posts: 169	Re: Think im going with 22s I heard i would have to grind down the hubs in the front to fit these wheels.

12-15-2013, 12:47 AM	#37
xfsketch 72 fleetside longbed 350 Join Date: Feb 2006 Location: Ohio Posts: 169	Re: Think im going with 22s Yereka! I think i know what i want fer sure! Heres another persons ride i modified to have eagle alloys 20x8.5 front and 20x10 backs with 4/6 drop? What sized tires i dunno. But this is my end result i want my truck to look like this!

12-15-2013, 02:45 AM	#38
Artikgrau325is Registered User Join Date: Oct 2012 Location: Seattle, WA Posts: 88	Re: Think im going with 22s I want to see 22's in the rear with a meaty sidewall, and 20's up front. Whole truck would be lowered, I'm just trying to set up a nice muscle truck thing I'm trying to picture in my mind haha.

12-15-2013, 04:45 PM	#39
xfsketch 72 fleetside longbed 350 Join Date: Feb 2006 Location: Ohio Posts: 169	Re: Think im going with 22s I will chop one up with 22s on the back

12-27-2013, 02:20 AM	#40
Milestone67GMC Registered User Join Date: Dec 2013 Location: Gladstone, Or Posts: 4	Re: Think im going with 22s Hey!! My name is Michael, I am new to this forum. I have a 67 GMC lwb that is lowered 5"s I have just though this last week put 22" Caddy Rims on her all the way around. 22x10s to be exact 285x45 front 305x45 rear I also at the same time put 1 1/4'' spacers in the front and 1 1/2'' in the rear. the pictures are not the best i just took these. Attached Images



Register or Log In To remove these advertisements.

12-27-2013, 11:18 AM	#41
68 Longbed Dan Registered User Join Date: Feb 2012 Location: California Posts: 75	Re: Think im going with 22s Here's my two cents, take it for what it's worth :P If you do 20's all around, get the truck as low as possible and make sure you have more meat on the rear. Otherwise, the sizes look different as the rear well looks larger with the truck sitting a bit higher in the rear. OR... if the truck is static drop, I prefer seeing 20's up front and 22's out back. Just fills it out better (again, unless it's level). Yea..... that's my...uh... "professional" opinion.... from a guy that works in the natural gas industry lol. __________________ Dan 1968 Longbed Stepside C10

12-27-2013, 07:32 PM	#42
fastnotch89 Registered User Join Date: Apr 2013 Location: Clover,SC Posts: 142	Re: Think im going with 22s I ran 22's front and rear... 4/6 drop with a 1 1/2 block also Attached Images

12-28-2013, 01:43 AM	#44
YBNORML Registered User Join Date: May 2010 Location: Edmonton, Alberta Posts: 3,844	Re: Think im going with 22s 20/22 with a 6/7 drop. This how it sits with the roof on. When it's topless, which is 90% of the time, the tire to fender well space is even. Attached Images __________________ --------------------------------------------------------------- Jason. 68’ GMC shortbox https://67-72chevytrucks.com/vboard/...d.php?t=794201 72' 2WD Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=425385 67' LongBox C-10 http://67-72chevytrucks.com/vboard/s...d.php?t=691845 InstaGram ybnorml67

12-28-2013, 02:02 AM	#45
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,877	Re: Think im going with 22s @YBNORML- I think you should just drop that beautiful Blazer off at my house! So sweet!! __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD Last edited by C10_ustacould; 12-28-2013 at 11:39 AM.

12-28-2013, 10:52 AM	#47
69moneypit Divorced .....WITH KIDS Join Date: Dec 2003 Location: mississippi Posts: 619	Re: Think im going with 22s Mines are 20 all around with a 3/5 . Soon to be replaced with bags and 22s. On pic passenger front was higher due to a problem with spring after oil change . Noticed it after I made it to a cruise in!!!! Attached Images __________________ 1969 GMC SWB 1975 Chevy Malibu 80k 1963 Ford Galaxie 63k (inherited) 2005 Nissan Armada (wife's idea)

12-28-2013, 11:02 AM	#48
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: Think im going with 22s If you need some help with choices .... holler at us , We do alot of them and we sell almost all the brands you posted including the Fooses.

01-04-2014, 12:29 AM	#50
xfsketch 72 fleetside longbed 350 Join Date: Feb 2006 Location: Ohio Posts: 169	Re: Think im going with 22s I am back n forth trying to figure some nice wheels for my ride. Im looking at a cheap alternative on craigslist. 22" Starr rims with he said a 50 series tire same size all around. 600 bucks they look nice. Do you think they will fit? http://cleveland.craigslist.org/cto/4199051169.html

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.