NC FREE 1961 Short bed frame whole/parts

[1963c-10]

Originally Posted by qksilver

Should have gotten that frame instead of being nice. Just spent $200 and $80 in gas.

Thanks.......................

Steve

Its still here if you want it Steve.

[Clyde65]

If no one want it and your taking it to the scrap, I would like the front bed mounts off of it. If you can get them off, they are riveted on.

Thanks

[qksilver]

Thanks but I went out and bought one. i figured it went to a good home and i did some searching and found one. 6 hours on the road and $280 bucks instead of 2 hours and about 25 buck in gas. My good deed still counts doesn't it? (-:

Steve

[1963c-10]

I understand Steve....

[Clyde65]

If no one want it and your taking it to the scrap, I would like the front bed mounts off of it. If you can get them off, they are riveted on.

[1963c-10]

ill let you know in a few days clyde. ive got a guy 15min away who says he'll take it. if he doesnt show up i'll get them off for you and you can cover shipping and have them we're under 8" on snow right now, so give me a week to see if he shows up.

[Mattacorn1]

I am really needing the reared for a frame out on a 65 that I am doing for my wife. Some dummy put a borg warner unit from an Iroc under her baby, and its just to darn narrow. Im in ohio but have the equipment and the time to come and save this frame from the crusher, if you will let me.
Thanks

[1963c-10]

If you want to come and get parts your more than welcome to Mattacorn1. The front bed mounts have been claimed by clyde 65, but you can have whats left of the frame or what parts you want off of it.

[Mattacorn1]

the rear End is the main item I need and that is still available correct. should I bring my torch set or do you have something On premises

[Mattacorn1]

Also could I get your address so that I can schedule the trip down to you

[1963c-10]

Originally Posted by Mattacorn1

the rear End is the main item I need and that is still available correct. should I bring my torch set or do you have something On premises

I still have the rear end. Its complete from drum to drum. I do not have a torch. I can help with what labor you might need to remove & load. I have the basic hand tools if they are any help, but welder and torch are on my to get list for this year. I will PM you my address

[1963c-10]

Clyde....look in the pic on post 5 for the damage to the passenger side front bed mount.

[Clyde65]

I see it laid back some. I guess Ill just have make some. Thank You 1963c-10 for your effort!

[1963c-10]

Heres a better pic....in my opinion too much work. But I'll get the driver side off for you if you want it. Don't ask me how it got this twisted.

[1963c-10]

Originally Posted by Mattacorn1

Also could I get your address so that I can schedule the trip down to you

Still coming down this weekend? I sent you a PM.

[1963c-10]

the frame went to ohio today w/mattacorn1. was glad to see it go to some use and not the scrapyard. was cool meeting w/another club member from out of state also.

[Mattacorn1]

Thanks again we will put it to use!

[1963c-10]

No problem. Glad to have met you and your friend....and that you got home ok!!!