WA Parting Out 1972 Chevy 1/2 Ton Custom Deluxe (Highlander)

[thefraze_1020]

Originally Posted by REEDS 72

Window regulators do you know if thay work and can I get pics of both sides thanks.

The passenger side worked smoothly, but the driver's side was sticking and had trouble moving up and down. It may just need to be cleaned up and lubed. More pictures tomorrow.

[Baker819]

Would you happen to have the a-arms?

[thefraze_1020]

Originally Posted by Baker819

Would you happen to have the a-arms?

Anything chassis/ frame related is gone.

[thefraze_1020]

Stickman:

I could only find the passenger side armrest; I must've gotten rid of the driver's side one.

If you're interested, $10.00 shipped.

[thefraze_1020]

12C Smoke:

Here are door panel pictures. Any discoloration you see is just dirt; they need a bath. Some of the pins are there on the back, but not all. I can't find any other hardware. The surface is chalky, so they are probably only good for a daily driver.

If you're interested still, I can do $55.00 shipped.

[thefraze_1020]

sambudo:

I'd can do $50.00 shipped all total for the cluster and tailgate hinges.

[thefraze_1020]

DeadheadNM:

Here are mirror pics. The discoloration is dirt/moss. They need a good cleaning. Overall, the chrome is in very good shape. The mirror with glass has a welded spot at the arm junction.

How about $35 shipped?

[thefraze_1020]

BowDown916:

Here's the cowl. There's surface rust on both sides, but this piece is restorable.

$80.00 shipped.

[DeadheadNM]

Originally Posted by thefraze_1020

DeadheadNM:

Here are mirror pics. The discoloration is dirt/moss. They need a good cleaning. Overall, the chrome is in very good shape. The mirror with glass has a welded spot at the arm junction.

How about $35 shipped?

That's a fair deal for sure on desirable mirrors and those acorn nuts/washers/mirror head aren't hard to replace. I know Tom (mx289) has been after a set of below eyeline's and since I don't have immediate need for them I will pass to him. Thanks for the pics and good luck with the sales! Pete

[thefraze_1020]

Ok thanks for passing them on to him.

[mx289]

Thanks Pete.I appreciate that sir.

And thanks cameron for the pics.I will take the mirrors.

PM me your info for a USPS M/O payment.
Thanks

[jocko]

If possible, I could use a set of the hog ring attachment rods from the old seat cover... Should be 1 long one and 2 short ones in the seat back and 2 long ones (I think) in the seat bottom. There might be more than that, but I need a whole set.

They are the somewhat bendable, squiggly little metal rods that run through the fabric hoops/tunnels that hold the seat covers onto the frames.

Don't need the seat cover, just those pesky little rods. Most people toss these anyway it seems! Like I said, there might be more than I've mentioned used on a single bench seat. Thanks!

[Already Gone]

I see someone asked about the A/C dash and you quoted a shipped price but I did not see any committment to buy it. If it still available would you ship to North Dakota for 125.00.

[lt155ruck]

Originally Posted by thefraze_1020

...

posi or open diff?

[mtnbikerxt]

Do you happen to have a drivers side lower control arm in good shape? If so, price shipped to 15239? Thanks

-Gen

[thefraze_1020]

Originally Posted by jocko

If possible, I could use a set of the hog ring attachment rods from the old seat cover... Should be 1 long one and 2 short ones in the seat back and 2 long ones (I think) in the seat bottom. There might be more than that, but I need a whole set.

They are the somewhat bendable, squiggly little metal rods that run through the fabric hoops/tunnels that hold the seat covers onto the frames.

Don't need the seat cover, just those pesky little rods. Most people toss these anyway it seems! Like I said, there might be more than I've mentioned used on a single bench seat. Thanks!

Do you have a picture by any chance? I think I might have that, but a picture for identification always helps.

[thefraze_1020]

Originally Posted by Already Gone

I see someone asked about the A/C dash and you quoted a shipped price but I did not see any committment to buy it. If it still available would you ship to North Dakota for 125.00.

It is still available. I can do $125.00 shipped, as long as you can give me a few days to get a box together and package it.

[thefraze_1020]

Originally Posted by lt155ruck

posi or open diff?

It's an open diff. If it was a posi, It would've been gone within a week haha.

[thefraze_1020]

Originally Posted by mtnbikerxt

Do you happen to have a drivers side lower control arm in good shape? If so, price shipped to 15239? Thanks

-Gen

The whole front end, and chassis/frame related parts are sold.

[Already Gone]

Originally Posted by thefraze_1020

It is still available. I can do $125.00 shipped, as long as you can give me a few days to get a box together and package it.

No problem, I will have to get the shipping address and that may take a couple of days. Is PayPal okay with you, if so PM me the particulars.

[1969_CM2590D]

If the visor clips are blue, I'd take them separate, or as a pair..

[jocko]

Originally Posted by thefraze_1020

Do you have a picture by any chance? I think I might have that, but a picture for identification always helps.

I don't have any pics Cameron, sorry. There are a few different thickness rods/wires. For instance, the one on the seat back is straight, so it is a little thicker since it doesn't need to bend. It's about 2x the thickness of a coat hanger wire. And it has about 3-4 bends per inch (it's squiggly... don't know a better way to describe it, ha). The wire that curves around the bottom of the seat bottom is a bit thinner so it can be bendable. They are squiggly so that, once a hog ring is hooked onto it thru the fabric, they can't slide left or right. If they came from a stock seat cover, they are probably the correct wires and rods. Thanks for looking for me, I really appreciate it.

[12C Smoke]

Originally Posted by thefraze_1020

12C Smoke:

Here are door panel pictures. Any discoloration you see is just dirt; they need a bath. Some of the pins are there on the back, but not all. I can't find any other hardware. The surface is chalky, so they are probably only good for a daily driver.

If you're interested still, I can do $55.00 shipped.

Thanks - Those look like some decent door panels but I will pass on them. They will probably clean up very well.

[Jake1971]

In line for passenger inner fender pending condition and total with shipping to 78602. Thanks.

[Already Gone]

Originally Posted by Already Gone

No problem, I will have to get the shipping address and that may take a couple of days. Is PayPal okay with you, if so PM me the particulars.

I just sent your money by PayPal.