MO Parting out 67 long bed step side, 283 with 3 ott. - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

l79c10 · 12-29-2014, 07:19 PM

Is the bellcrank (z bar) frame bracket avajlable?

**specialtyretail** · 12-30-2014, 08:54 AM

Quote:

Originally Posted by l79c10

Is the bellcrank (z bar) frame bracket avajlable?

It is still riveted to the frame, but yes, it will be for sale when I can get it taken off. Looking at another free day Thursday I think. Thanks, Fred.

**ScottH** · 12-13-2014, 11:11 AM

I'd be interested in the carb if 2 barrel, carb linkage, alternator brackets, and possibly exhaust manifolds.

Thanks
Scott

**specialtyretail** · 12-14-2014, 03:28 AM

Quote:

Originally Posted by ScottH

I'd be interested in the carb if 2 barrel, carb linkage, alternator brackets, and possibly exhaust manifolds.

Thanks
Scott

Hey Scott. Carburetor, linkage and the alternator brackets, $80.00 shipped for all of it. Thanks, Fred.

**jmader** · 12-13-2014, 11:40 AM

How is the drivers side door latch relay? I'll take it if the spring is intact and the grooves aren't too stripped out.

**jmader** · 12-26-2014, 04:18 PM

Quote:

Originally Posted by jmader

How is the drivers side door latch relay? I'll take it if the spring is intact and the grooves aren't too stripped out.

Have you had a chance to check on this or the other parts I asked about yet? Thanks

**specialtyretail** · 12-27-2014, 02:20 PM

Quote:

Originally Posted by jmader

Have you had a chance to check on this or the other parts I asked about yet? Thanks

Hey Guys. Please bear with me, I am moving a little slow, sort of dinged my back up a little and I am for sure feeling my age. If I can sit and reach it, it will come off the truck today. If I have to crawl and twist, probably not, well, at least I have some 800 Ibuprofen pills. jmader, is the relay you are asking about on the door edge where it latches or is it where the handle attaches? Thanks, Fred.

**jmader** · 12-27-2014, 02:29 PM

Quote:

Originally Posted by specialtyretail

Hey Guys. Please bear with me, I am moving a little slow, sort of dinged my back up a little and I am for sure feeling my age. If I can sit and reach it, it will come off the truck today. If I have to crawl and twist, probably not, well, at least I have some 800 Ibuprofen pills. jmader, is the relay you are asking about on the door edge where it latches or is it where the handle attaches? Thanks, Fred.

It's the part that the inside door handle attaches to. The 67's are different than 68-72

**specialtyretail** · 12-28-2014, 06:42 PM

Quote:

Originally Posted by jmader

Have you had a chance to check on this or the other parts I asked about yet? Thanks

Spring is broken. Sorry.

**jmader** · 12-13-2014, 11:43 AM

Also interested in the seat belts, boots and the thermostat housing. What about the intake manifold and distributor? What are the casting numbers on those?

**specialtyretail** · 12-13-2014, 07:39 PM

Quote:

Originally Posted by jmader

Also interested in the seat belts, boots and the thermostat housing. What about the intake manifold and distributor? What are the casting numbers on those?

Let me get you some numbers and pics Sunday. I had errands today and the smoker took more of my time than I was expecting. Thanks, Fred.

**specialtyretail** · 12-15-2014, 12:40 PM

Quote:

Originally Posted by jmader

Also interested in the seat belts, boots and the thermostat housing. What about the intake manifold and distributor? What are the casting numbers on those?

I did not get the #'s for you yet. It is just an original old 2 bbl intake and points type distributor. The ear is still on the stat housing and I have not got the seat belts pulled yet, unsure on overall condition. Thanks, Fred.

**jmader** · 12-16-2014, 01:28 AM

Quote:

Originally Posted by specialtyretail

I did not get the #'s for you yet. It is just an original old 2 bbl intake and points type distributor. The ear is still on the stat housing and I have not got the seat belts pulled yet, unsure on overall condition. Thanks, Fred.

Ok I'll wait to hear from you. Thanks.

**specialtyretail** · 12-16-2014, 12:23 PM

Quote:

Originally Posted by jmader

Ok I'll wait to hear from you. Thanks.

I appreciate that. It is dark when I leave for work and dark when I get home. The truck has four flats or it would already be rolled into the shop. I need to buy a four wheeler so I can drag stuff like this around my yard.

**specialtyretail** · 12-27-2014, 04:19 PM

Quote:

Originally Posted by jmader

Also interested in the seat belts, boots and the thermostat housing. What about the intake manifold and distributor? What are the casting numbers on those?

I got the intake cleaned off a little. Casting # 8877652. Thanks, Fred.

**jmader** · 12-27-2014, 08:53 PM

Quote:

Originally Posted by specialtyretail

I got the intake cleaned off a little. Casting # 8877652. Thanks, Fred.

Looks good. How much do you want for them? How about the seat belts?

**specialtyretail** · 12-27-2014, 10:07 PM

Quote:

Originally Posted by jmader

Looks good. How much do you want for them? How about the seat belts?

Let me do some ciphering, shipping will be almost as much as I would want for the parts. I was not able to get to the seatbelts today, hoping my back is healed up Sunday so I can twist around in the cab. Thanks, Fred.

**specialtyretail** · 12-28-2014, 04:27 PM

Quote:

Originally Posted by jmader

Looks good. How much do you want for them? How about the seat belts?

Did some figuring. I can ship you the intake and the distributor without the distributor cap, it is trashed, for $60.00. Seat belts are junk. Thanks, Fred.

**jmader** · 12-29-2014, 07:06 AM

Quote:

Originally Posted by specialtyretail

Did some figuring. I can ship you the intake and the distributor without the distributor cap, it is trashed, for $60.00. Seat belts are junk. Thanks, Fred.

Ok I can live with that. Was the thermostat housing any good? Do you know if the angled style is original to this setup? I was thinking with the oil filler tube it would be the straight version.

**michael bustamante** · 12-13-2014, 12:01 PM

Ignitiinswitch set up with key?. How much? Are those script v covers?
Has great patina. Us 67 guys will hoard this one quick

**specialtyretail** · 12-14-2014, 04:24 PM

Quote:

Originally Posted by michael bustamante

Ignitiinswitch set up with key?. How much? Are those script v covers?
Has great patina. Us 67 guys will hoard this one quick

SOLD,,,, THANKS.... Look what I found in the glove box. The ignition switch was sticking through the hole in the dash but the other parts were in the glove box. The outer bezel has seen better days but the spacer is intact. $32.00 shipped if you can use it. Thanks, Fred.

slowcpe · 12-13-2014, 12:30 PM

Not sure if they are different in long bed/short but I'm needing the brace that goes from the step to the frame.

slowcpe · 12-13-2014, 12:31 PM

Also what kind of shape are the doors in?

thepenguin99 · 12-13-2014, 12:33 PM

Can't really tell in the pic. How is the floor mat?

**too much stuff** · 12-13-2014, 12:36 PM

Radio delete and seat belts?

12-29-2014, 07:19 PM	#1
l79c10 Registered User Join Date: Dec 2014 Location: Portsmouth, NH Posts: 8	Re: Parting out 67 long bed step side, 283 with 3 ott. Is the bellcrank (z bar) frame bracket avajlable?

12-13-2014, 11:11 AM	#3
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Parting out 67 long bed step side, 283 with 3 ott. I'd be interested in the carb if 2 barrel, carb linkage, alternator brackets, and possibly exhaust manifolds. Thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

12-13-2014, 11:40 AM	#5
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: Parting out 67 long bed step side, 283 with 3 ott. How is the drivers side door latch relay? I'll take it if the spring is intact and the grooves aren't too stripped out. __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

12-13-2014, 11:43 AM	#10
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: Parting out 67 long bed step side, 283 with 3 ott. Also interested in the seat belts, boots and the thermostat housing. What about the intake manifold and distributor? What are the casting numbers on those? __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy) Last edited by jmader; 12-13-2014 at 02:32 PM.

12-13-2014, 12:01 PM	#20
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,848	Re: Parting out 67 long bed step side, 283 with 3 ott. Ignitiinswitch set up with key?. How much? Are those script v covers? Has great patina. Us 67 guys will hoard this one quick __________________ 1967custom Last edited by michael bustamante; 12-13-2014 at 12:11 PM.

12-13-2014, 12:30 PM	#22
slowcpe Registered User Join Date: Sep 2013 Location: Evansville, IN Posts: 1,774	Re: Parting out 67 long bed step side, 283 with 3 ott. Not sure if they are different in long bed/short but I'm needing the brace that goes from the step to the frame. __________________ Ryan 1967 Red Stepside..."Laymond" http://67-72chevytrucks.com/vboard/s...40#post6441840 1972 Medium Olive SWB-Chester http://67-72chevytrucks.com/vboard/s...d.php?t=759628 1967/71 Blue SWB C10..SOLD 1977 SWB K10..my grandpa's.....never should have sold

12-13-2014, 12:31 PM	#23
slowcpe Registered User Join Date: Sep 2013 Location: Evansville, IN Posts: 1,774	Re: Parting out 67 long bed step side, 283 with 3 ott. Also what kind of shape are the doors in? __________________ Ryan 1967 Red Stepside..."Laymond" http://67-72chevytrucks.com/vboard/s...40#post6441840 1972 Medium Olive SWB-Chester http://67-72chevytrucks.com/vboard/s...d.php?t=759628 1967/71 Blue SWB C10..SOLD 1977 SWB K10..my grandpa's.....never should have sold

12-13-2014, 12:33 PM	#24
thepenguin99 Registered User Join Date: Mar 2004 Location: Millington TN Posts: 435	Re: Parting out 67 long bed step side, 283 with 3 ott. Can't really tell in the pic. How is the floor mat?

12-13-2014, 12:36 PM	#25
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,723	Re: Parting out 67 long bed step side, 283 with 3 ott. Radio delete and seat belts? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.