bought this today - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mr. D · 06-06-2015, 09:18 PM

If the motor has been sitting for longer than a few months, make sure you use a drill motor to spin the oil pump for a few min before firing it over to get the oil circulating. A friend of mine did not do this and he had a lot of valve knocking for about 2-weeks before it finally cleared itself up. He always wondered if any permanent damage was top to the top end.
Valve covers and brackets look great!

logansdad · 06-07-2015, 11:37 AM

$450 later

logansdad · 06-07-2015, 11:39 AM

Quote:

Originally Posted by Mr. D

If the motor has been sitting for longer than a few months, make sure you use a drill motor to spin the oil pump for a few min before firing it over to get the oil circulating. A friend of mine did not do this and he had a lot of valve knocking for about 2-weeks before it finally cleared itself up. He always wondered if any permanent damage was top to the top end.
Valve covers and brackets look great!

That's hard to do without taking off the intake...but thanks for telling me!

Mr. D · 06-09-2015, 12:15 AM

Quote:

Originally Posted by logansdad

That's hard to do without taking off the intake...but thanks for telling me!

Guess I was thinking about Gen 1 SBC.

Separate Q:
Do you have any idea where the rear roll pan came from?
I'm finding them for pickups but I'm not sure it will fit on a suburban.
Posted via Mobile Device

logansdad · 06-11-2015, 07:35 PM

Quote:

Originally Posted by Mr. D

Guess I was thinking about Gen 1 SBC.

Separate Q:
Do you have any idea where the rear roll pan came from?
I'm finding them for pickups but I'm not sure it will fit on a suburban.
Posted via Mobile Device

Yes I bought the one for my 72 burb from grant customs. Although on that one I had them put the section in it for a tag. Not cheap though about $300 shipped

**Hart_Rod** · 06-23-2015, 03:42 PM

Looking forward to seeing what you do with this.

logansdad · 06-25-2015, 04:58 PM

Pictures with the headers on and most of the wires cleaned up.

I finally got the lt1 to run. The street and performance harness had two wires off going into the ecu. What a pain to track down. I have to now get the ecu reflashed for the mods I did.

**Advanced Design** · 06-25-2015, 07:53 PM

That looks good!

logansdad · 05-27-2016, 09:03 AM

working on it and removing the horrible bodywork

**LockDoc** · 05-27-2016, 11:32 AM

-
Glad to see you are working on it.....

LockDoc

logansdad · 05-27-2016, 12:56 PM

Having the lift makes this process a lot easier but the down side is finding all the problems from previous owners. How about this picture with the door measurement!!!

logansdad · 09-30-2016, 05:57 PM

Been working on it just haven't had time for pics so here you go. More pictures coming next week

**LockDoc** · 09-30-2016, 09:02 PM

-
Lookin' good. Progress is progress....

LockDoc

Devillusion · 10-05-2016, 01:59 AM

Love the rear door/hatch assembly. Looks deadly.

goldenburb · 10-27-2016, 11:20 AM

Cool getting it beach ready 😎 what size wheel ??

logansdad · 11-06-2016, 05:41 PM

Quote:

Originally Posted by goldenburb

Cool getting it beach ready 😎 what size wheel ??

22x9 detroit steel

logansdad · 11-06-2016, 05:46 PM

Finally reinstalled the lt1 with some additional bling and I think I going to break the bank between March serpentine systems and vintage air. love seeing it come together

logansdad · 11-06-2016, 05:49 PM

Quote:

Originally Posted by Devillusion

Love the rear door/hatch assembly. Looks deadly.

I wouldn't advise doing this to two barn doors to anyone. One of the tougher parts of the build

**Advanced Design** · 11-06-2016, 10:45 PM

The firewall, paint and bling looks good.

mcmlxix · 11-08-2016, 01:03 AM

What about painting the lip of the wheel white? White wall look but less hassle....

goldenburb · 11-08-2016, 10:19 PM

Quote:

Originally Posted by mcmlxix

What about painting the lip of the wheel white? White wall look but less hassle....

I vote yes,,I just got my mod steel 20X9 and was thinking on doing the same

logansdad · 11-20-2016, 03:18 PM

More pictures of the 23" lokar, digital dash, and some trick filler pieces for radiator to grill

**Advanced Design** · 11-20-2016, 04:41 PM

Great parts...did you fab the filler pieces?

logansdad · 01-06-2017, 04:42 PM

Finally after 2 years of hard work it is painted

logansdad · 01-06-2017, 04:43 PM

Quote:

Originally Posted by Advanced Design

Great parts...did you fab the filler pieces?

No I bought them but I will have to re make the one on the radiator because it is too big

06-06-2015, 09:18 PM	#26
Mr. D Registered User Join Date: Mar 2015 Location: San Jose, CA Posts: 130	Re: bought this today If the motor has been sitting for longer than a few months, make sure you use a drill motor to spin the oil pump for a few min before firing it over to get the oil circulating. A friend of mine did not do this and he had a lot of valve knocking for about 2-weeks before it finally cleared itself up. He always wondered if any permanent damage was top to the top end. Valve covers and brackets look great! __________________ 56 Chevy step-side 68 Chevy Suburban 69 Corvette Stingray 00 BMW 325 (Daily driver) 09 BMW M3 18 GMC Acadia (Wife's daily driver)

06-07-2015, 11:37 AM	#27
logansdad Registered User Join Date: Dec 2012 Location: new smyrna beach FL Posts: 107	Re: bought this today $450 later Attached Images __________________ 1972 chevy sububan----frame off restoration now for sale😟 http://67-72chevytrucks.com/vboard/s...d.php?t=560803 1968 GMC Suburban- turned 67 air ride, streched and shaved everything, 22" detroit steelies, lt1 http://67-72chevytrucks.com/vboard/s...d.php?t=668574 suburban 4x4 1 ton zz454 daily kid hauler 1991 gmc syclone 1987 c10 silverado "Hey lifted 4x4 guy does your truck know what mud is" "Every inch you go up is an inch you don't have"

06-23-2015, 03:42 PM	#31
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: bought this today Looking forward to seeing what you do with this. __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

06-25-2015, 04:58 PM	#32
logansdad Registered User Join Date: Dec 2012 Location: new smyrna beach FL Posts: 107	Re: bought this today Pictures with the headers on and most of the wires cleaned up. I finally got the lt1 to run. The street and performance harness had two wires off going into the ecu. What a pain to track down. I have to now get the ecu reflashed for the mods I did. Attached Images __________________ 1972 chevy sububan----frame off restoration now for sale😟 http://67-72chevytrucks.com/vboard/s...d.php?t=560803 1968 GMC Suburban- turned 67 air ride, streched and shaved everything, 22" detroit steelies, lt1 http://67-72chevytrucks.com/vboard/s...d.php?t=668574 suburban 4x4 1 ton zz454 daily kid hauler 1991 gmc syclone 1987 c10 silverado "Hey lifted 4x4 guy does your truck know what mud is" "Every inch you go up is an inch you don't have"

06-25-2015, 07:53 PM	#33
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,028	Re: bought this today That looks good! __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

05-27-2016, 09:03 AM	#34
logansdad Registered User Join Date: Dec 2012 Location: new smyrna beach FL Posts: 107	Re: bought this today working on it and removing the horrible bodywork Attached Images __________________ 1972 chevy sububan----frame off restoration now for sale😟 http://67-72chevytrucks.com/vboard/s...d.php?t=560803 1968 GMC Suburban- turned 67 air ride, streched and shaved everything, 22" detroit steelies, lt1 http://67-72chevytrucks.com/vboard/s...d.php?t=668574 suburban 4x4 1 ton zz454 daily kid hauler 1991 gmc syclone 1987 c10 silverado "Hey lifted 4x4 guy does your truck know what mud is" "Every inch you go up is an inch you don't have"

05-27-2016, 11:32 AM	#35
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,799	Re: bought this today - Glad to see you are working on it..... LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

05-27-2016, 12:56 PM	#36
logansdad Registered User Join Date: Dec 2012 Location: new smyrna beach FL Posts: 107	Re: bought this today Having the lift makes this process a lot easier but the down side is finding all the problems from previous owners. How about this picture with the door measurement!!! Attached Images __________________ 1972 chevy sububan----frame off restoration now for sale😟 http://67-72chevytrucks.com/vboard/s...d.php?t=560803 1968 GMC Suburban- turned 67 air ride, streched and shaved everything, 22" detroit steelies, lt1 http://67-72chevytrucks.com/vboard/s...d.php?t=668574 suburban 4x4 1 ton zz454 daily kid hauler 1991 gmc syclone 1987 c10 silverado "Hey lifted 4x4 guy does your truck know what mud is" "Every inch you go up is an inch you don't have"

09-30-2016, 05:57 PM	#37
logansdad Registered User Join Date: Dec 2012 Location: new smyrna beach FL Posts: 107	Re: bought this today Been working on it just haven't had time for pics so here you go. More pictures coming next week Attached Images __________________ 1972 chevy sububan----frame off restoration now for sale😟 http://67-72chevytrucks.com/vboard/s...d.php?t=560803 1968 GMC Suburban- turned 67 air ride, streched and shaved everything, 22" detroit steelies, lt1 http://67-72chevytrucks.com/vboard/s...d.php?t=668574 suburban 4x4 1 ton zz454 daily kid hauler 1991 gmc syclone 1987 c10 silverado "Hey lifted 4x4 guy does your truck know what mud is" "Every inch you go up is an inch you don't have"

09-30-2016, 09:02 PM	#38
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,799	Re: bought this today - Lookin' good. Progress is progress.... LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

10-05-2016, 01:59 AM	#39
Devillusion Registered User Join Date: Jan 2010 Location: Brandon, Manitoba, Canada Posts: 782	Re: bought this today Love the rear door/hatch assembly. Looks deadly. __________________ 1967 K30 4x4/12v Cummins/getrag/D60/D70/355s 1967 GMC suburban 4x4/LS swap 5.3/4500/205/10 bolt/14 bolt full floater 1963 C10 reg cab long box 1970 Chevelle 1968 Biscayne 2dr post "...there is no excuse for what I am about to do, but dangit....it's gonna be fun!"

10-27-2016, 11:20 AM	#40
goldenburb Registered User Join Date: Jun 2010 Location: aurora colo Posts: 211	Re: bought this today Cool getting it beach ready 😎 what size wheel ?? __________________ 70 c10 2wd crashed Suburban 67 c10 2wd sb truck 67 c10 4wd lb truck

11-06-2016, 05:46 PM	#42
logansdad Registered User Join Date: Dec 2012 Location: new smyrna beach FL Posts: 107	Re: bought this today Finally reinstalled the lt1 with some additional bling and I think I going to break the bank between March serpentine systems and vintage air. love seeing it come together Attached Images __________________ 1972 chevy sububan----frame off restoration now for sale😟 http://67-72chevytrucks.com/vboard/s...d.php?t=560803 1968 GMC Suburban- turned 67 air ride, streched and shaved everything, 22" detroit steelies, lt1 http://67-72chevytrucks.com/vboard/s...d.php?t=668574 suburban 4x4 1 ton zz454 daily kid hauler 1991 gmc syclone 1987 c10 silverado "Hey lifted 4x4 guy does your truck know what mud is" "Every inch you go up is an inch you don't have"

11-06-2016, 10:45 PM	#44
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,028	Re: bought this today The firewall, paint and bling looks good. __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

11-08-2016, 01:03 AM	#45
mcmlxix Collector of Projects Join Date: Apr 2003 Location: Las Vegas Posts: 3,106	Re: bought this today What about painting the lip of the wheel white? White wall look but less hassle.... __________________ Rich 1972 K5 Blazer CST Click HERE D60 BIG BRAKE UPGRADE Click HERE



Register or Log In To remove these advertisements.

11-20-2016, 03:18 PM	#47
logansdad Registered User Join Date: Dec 2012 Location: new smyrna beach FL Posts: 107	Re: bought this today More pictures of the 23" lokar, digital dash, and some trick filler pieces for radiator to grill Attached Images __________________ 1972 chevy sububan----frame off restoration now for sale😟 http://67-72chevytrucks.com/vboard/s...d.php?t=560803 1968 GMC Suburban- turned 67 air ride, streched and shaved everything, 22" detroit steelies, lt1 http://67-72chevytrucks.com/vboard/s...d.php?t=668574 suburban 4x4 1 ton zz454 daily kid hauler 1991 gmc syclone 1987 c10 silverado "Hey lifted 4x4 guy does your truck know what mud is" "Every inch you go up is an inch you don't have"

11-20-2016, 04:41 PM	#48
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,028	Re: bought this today Great parts...did you fab the filler pieces? __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

01-06-2017, 04:42 PM	#49
logansdad Registered User Join Date: Dec 2012 Location: new smyrna beach FL Posts: 107	Re: bought this today Finally after 2 years of hard work it is painted Attached Images __________________ 1972 chevy sububan----frame off restoration now for sale😟 http://67-72chevytrucks.com/vboard/s...d.php?t=560803 1968 GMC Suburban- turned 67 air ride, streched and shaved everything, 22" detroit steelies, lt1 http://67-72chevytrucks.com/vboard/s...d.php?t=668574 suburban 4x4 1 ton zz454 daily kid hauler 1991 gmc syclone 1987 c10 silverado "Hey lifted 4x4 guy does your truck know what mud is" "Every inch you go up is an inch you don't have"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.