67 long box small window

[ho70]

Hey a Bubbakeg.

[5567Cruiser]

Originally Posted by Metaldoc

I bought floor pans, inner and outer rockers, cab corners, and front cab supports. I made the kick panel and air vent, rear cab supports, and had to fix the store bought panels to the point where I could have made them. Bad shipper and parts manufacturer.

I had the same problem with cab corners repops from taiwan as required fabrication to fit. I located some OEM rockers and they fit beautifully.Is your truck a CST? Have fun and keep the pictures of progress coming.

[Metaldoc]

Originally Posted by 5567Cruiser

I had the same problem with cab corners repops from taiwan as required fabrication to fit. I located some OEM rockers and they fit beautifully.Is your truck a CST? Have fun and keep the pictures of progress coming.

No it's a base model no power anything until my hands touched it.

[Metaldoc]

not much left of the wood bed,

[Metaldoc]

Originally Posted by michael bustamante

what paint did you use on the ramhorns and was it a rattle can or sprayed?

rattle can it's called cast blast cast iron, still has to run to final cure it will look a bit darker.

[Metaldoc]

got some hours in the bed (truck bed) today, it doesn't look to bad. also finished my yard***** II lawn mower. tooo much time on my hands.

[Longhornss]

Originally Posted by Metaldoc

got some hours in the bed (truck bed) today, it doesn't look to bad. also finished my yard***** II lawn mower. tooo much time on my hands.

If you have that kinda time on your hands you wanna come down here and install my new rockers for me....... These new ones don't fit very well, and I am finding it hard to get myself motivated to so the mods required after long hot days at work.

[Metaldoc]

havin A/C in the shop helps, took apart the box, only to find more work. But the box is in pretty good shape. I found the two welds that had to be ground on both sides.