MD 1969 LWB frame for cuts

[Rocket3]

Would you please post close up pictures of the area where coil springs mount (bottom and inside rail)on the rear sections of frame rails.

[Rocket3]

Also,include price for rear frame rail sections.

[richard2717]

Originally Posted by Rocket3

Would you please post close up pictures of the area where coil springs mount (bottom and inside rail)on the rear sections of frame rails.

Originally Posted by Rocket3

Also,include price for rear frame rail sections.

I will take some more photos tomorrow afternoon. I work until noon. How much of the rear frame rail do you need?

Richard

[Rocket3]

Originally Posted by richard2717

I will take some more photos tomorrow afternoon. I work until noon. How much of the rear frame rail do you need?

Richard

I need from axle bump stop to 2nd bed mount,but would consider the whole length of rear section IF the price is right. The whole length would require 2 less weld joints.

[richard2717]

Originally Posted by Rocket3

I need from axle bump stop to 2nd bed mount,but would consider the whole length of rear section IF the price is right. The whole length would require 2 less weld joints.

I was a little unclear if you need the cross member as well so I took some pics of it too. the top of the crossmember has light pitting and the bottom of it has heavy surface rust but not pitted up real bad.


I think i can UPS up to 108" long on the frame rails but I am going to need your complete shipping address to determine exact cost. PM it to me. The online calculator does not come out accurate on things of this nature.

108" would put you just ahead of the trailing arm cross member all the way to the rear of the frame.

All of the body mounts have already sold but I do still have the bump stops if you need them.

Let me know exactly what you want then I can determine shipping cost. Once I know the shipping I can give you a combined rate for everything.

Richard


.

[richard2717]

more pics


.

[richard2717]

Last 4


.

[richard2717]

Originally Posted by Rocket3

I need from axle bump stop to 2nd bed mount,but would consider the whole length of rear section IF the price is right. The whole length would require 2 less weld joints.

David,
Look at the frame rail picture and see if I have marks in correct areas.

Just the UPS shipping is $130 if you want both frame rails cut at 108" approx 100 lbs

If you want it cut at the 64" to the 96" mark shipping is about $55 approx. 60#

Anything else and I will have to cut it 1st so I can get closer correct weights

Also attached pictures of the fish plates they only weigh about 5lbs so should be able to slide them inside the frame rails with no problem.

both frame rails and fish plates would add $100 to whatever length you choose. I will band them together and wrap with cardboard to ship.

LMK

Richard

EDIT: I just realized I marked the wrong side of the cab mount holes for 96". It should be on the left side of the holes as looking at the picture


.

[71chebbysb]

I need a piece of frame where the power steering box mounts. Here is a pic with the cut lines. Do you still have this section left?

[Rocket3]

Originally Posted by richard2717

I was a little unclear if you need the cross member as well so I took some pics of it too. the top of the crossmember has light pitting and the bottom of it has heavy surface rust but not pitted up real bad.


I think i can UPS up to 108" long on the frame rails but I am going to need your complete shipping address to determine exact cost. PM it to me. The online calculator does not come out accurate on things of this nature.

108" would put you just ahead of the trailing arm cross member all the way to the rear of the frame.

All of the body mounts have already sold but I do still have the bump stops if you need them.

Let me know exactly what you want then I can determine shipping cost. Once I know the shipping I can give you a combined rate for everything.

Richard


.

PM sent

[richard2717]

Originally Posted by 71chebbysb

I need a piece of frame where the power steering box mounts. Here is a pic with the cut lines. Do you still have this section left?

I do still have it. Pm me your address so I can get an accurate shipping quote

Richard

[richard2717]

Originally Posted by Rocket3

PM sent

Don't have a pm from you

[Rocket3]

Originally Posted by richard2717

David,
Look at the frame rail picture and see if I have marks in correct areas.

Just the UPS shipping is $130 if you want both frame rails cut at 108" approx 100 lbs

If you want it cut at the 64" to the 96" mark shipping is about $55 approx. 60#

Anything else and I will have to cut it 1st so I can get closer correct weights

Also attached pictures of the fish plates they only weigh about 5lbs so should be able to slide them inside the frame rails with no problem.

both frame rails and fish plates would add $100 to whatever length you choose. I will band them together and wrap with cardboard to ship.

LMK

Richard

EDIT: I just realized I marked the wrong side of the cab mount holes for 96". It should be on the left side of the holes as looking at the picture


.

Thanks for pics and info. I will need to measure on my frame to see what is best,however it will be raining here all day Monday,11/28, so it will be later in the week before I can tell you anything.

[Rocket3]

Originally Posted by richard2717

Don't have a pm from you

It was to give you shipping address. You answered shipping cost in this thread. I will send again to make sure shipping cost is correct for my address.

[richard2717]

Originally Posted by Rocket3

Thanks for pics and info. I will need to measure on my frame to see what is best,however it will be raining here all day Monday,11/28, so it will be later in the week before I can tell you anything.

got ur pm's as well. just let me know when you figure out the length you want shipped. I will hold them until I hear back from you.

I sent you a pm on your question about the upper coil mounts

[richard2717]

Originally Posted by 71chebbysb

I need a piece of frame where the power steering box mounts. Here is a pic with the cut lines. Do you still have this section left?

here is a picture of that section. $30 plus shipping


.

[richard2717]

Rocket3 is out on the frame parts so they are all still available

[71chebbysb]

I'm not getting any help locally so I will do the $30 + shipping for this section. Please PM what I need to do in order to pay you and I will send you my address. Here is a shot of the area that I need:

[richard2717]

Originally Posted by 71chebbysb

I'm not getting any help locally so I will do the $30 + shipping for this section. Please PM what I need to do in order to pay you and I will send you my address. Here is a shot of the area that I need:

Pm sent

[richard2717]

Originally Posted by 71chebbysb

I'm not getting any help locally so I will do the $30 + shipping for this section. Please PM what I need to do in order to pay you and I will send you my address. Here is a shot of the area that I need:

Got your payment, frame section will ship tomorrow

Thanks
Richard

[richard2717]

Still have some pcs & cross members left

[richard2717]

Ttt

[richard2717]

Ttt

[richard2717]

track bar & mounts, lower shock mounts, coil spring cross member and related brackets all sold local today.

Still have frame rail cuts and some other pcs available

[broken 68 chevy]

looking to buy trans crossmember if its for the three speed trans