NE 49 Chevy 1/2 Ton Parting Out

[paulspickupparts]

Originally Posted by Sandemonium

Do you happen to have a pair (passenger and driver side) of front fender support rods? I believe they go from the inside of the front fender to the lower outside of the front fender behind the wheel.

Yes I do . $35 plus shipping. Thanks

[Sandemonium]

Originally Posted by paulspickupparts

Yes I do . $35 plus shipping. Thanks

Would you do $35 shipped to Phoenix AZ 85086?

[paulspickupparts]

Thanks for the offer . I will pass , looks like shipping is going to be $14 . Thanks

[PRODUCTIONOFFROAD]

do you have any running boards with brackets sitting around?

[paulspickupparts]

I have some brackets left , but most of the boards I have left are in poor condition. Thanks

[PRODUCTIONOFFROAD]

Poor condition might not be a bad thing. Our whole truck is in "poor" condition! Have any pics? I may still be interested

[paulspickupparts]

so what is your truck, 1/2 3/4 1 ton . Will need to know for length of the boards and of course the brackets are also different.

[starterman99]

do you have a good picture of the radio speaker cover and trim? I am interested if it is in good shape.

[paulspickupparts]

Originally Posted by starterman99

do you have a good picture of the radio speaker cover and trim? I am interested if it is in good shape.

Here is a pic of a nice speaker grille that I blasted with a nice upper. I am looking thru the lowers but all have little nics or dings.

[starterman99]

OK thanks, If you find a nice lower let me know.

[Augusta]

I need back brake hardware for a 1949 1/2 ton..
I only have the drums.
I could use the spring and hardware that holds the pads together and the E brake hardware.
let me know if you have it.
Thanks

[paulspickupparts]

I only have one good drum left . All the others have been sold. I would have pull the drums off of the other trucks to see if I can get a complete set of hardware with brake pulls . It is very hard to put a complete set together. Most seem to have been thrown away. If you want give me a call at 4O2 643 5369 . Thanks Paul

[paulspickupparts]

Pic

[JAP51]

I need a pair of spindles ,how much and the ride to 32568 zip code?

[paulspickupparts]

This truck is long gone . I still have about 10 more that I will be getting rid of . Can you give me the year and tonnage of your pickup. I can check if I have something. Thanks

[JAP51]

I need the spindles for 1949 1/2 ton.

[paulspickupparts]

$100 for the pair if good Plus 10.50 shipping.

[MIKESAD50]

You have right hand door handle 50chevy?

[paulspickupparts]

Originally Posted by MIKESAD50

You have right hand door handle 50chevy?

I have one $12 plus shipping . Priority usually runs about $7.50 . Would be driver quality , some light pitting but real GM.

[paulspickupparts]

Originally Posted by MIKESAD50

You have right hand door handle 50chevy?

I have several left still on trucks . Normal wear and light pitting . $10 plus shipping.

[paulspickupparts]

Originally Posted by JAP51

I need the spindles for 1949 1/2 ton.

I believe I have a set . They are still on the truck and will not know condition until I get them off . If good $100 for the pair. Mainly about time. Thanks

[Suburbanlou]

How about seat springs?

[paulspickupparts]

I have a pair but shipping usually kills the deal and try to sell them locally. The set on this truck sold locally . Thanks

[PRODUCTIONOFFROAD]

1/2 ton shortbed Frankenstein

[paulspickupparts]

Cool , I will take a look later this afternoon and try to get a pic this evening. I think I have something that will work.