Stock appearing engine bays... - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**DaHos** · 02-04-2017, 01:26 PM

Little mix of both......

kajf9491 · 02-04-2017, 04:56 PM

Quote:

Originally Posted by Eastonspeedworks

This might be a little out there but here's mine with a ls and some filler panels

Easton, where are your spark plug wires routed to? are you running an ignition box or something? Looks very clean.

**dennislbrooks** · 02-04-2017, 08:48 PM

My attempt.

**specialtyretail** · 02-04-2017, 09:14 PM

Quote:

Originally Posted by dennislbrooks

My attempt.

Not a thing wrong with that,, very nice...

Andy4639 · 02-05-2017, 11:13 AM

My Ramp truck has a stock looking bay.
Right down to the rust and oil to match!

**specialtyretail** · 02-05-2017, 01:02 PM

I can relate.....

Andy4639 · 02-05-2017, 01:12 PM

Quote:

Originally Posted by specialtyretail

I can relate.....

slikside · 02-05-2017, 01:54 PM

Mine.

Exceptions are HEI, and missing Air Injector Pump and its associated air manifols on the exhaust manifolds.

joeydurango · 02-05-2017, 02:06 PM

Some of these bays are immaculate. Looks awesome. But you folks must never drive on dirt roads... I can't even begin to keep mine that clean. Gonna have to do a spring deep clean.

davepl · 02-05-2017, 02:13 PM

Here are mine... one's a truck, the other a car...

el_fantasma · 02-06-2017, 12:42 AM

350

bill3rail · 02-06-2017, 09:33 AM

Other than the air cleaner, which I have since replaced...
Some pictures missed the request for stock engine bays.

**specialtyretail** · 02-06-2017, 10:09 AM

Digging on the six cylinder....

fatbass · 02-06-2017, 10:57 AM

'71 C20 307 2 bbl. Stock except for HEI.

Name: 71 c20 307 2bbl .jpg
Views: 705
Size: 58.2 KB

B Myers · 02-06-2017, 11:56 AM

Stock air cleaner with 5 1.5" holes cut in the back for air flow, 2.5" corvette manifolds, black cap HEI, electric choke QJ, one wire alternator. Very stock looking but good performance and driveability upgrades, not that I have been driving it lol, in a few weeks I hope.
Name: Engine pic.jpg
Views: 701
Size: 53.0 KB

Name: Engine pic.jpg
Views: 701
Size: 53.0 KB

**specialtyretail** · 02-06-2017, 03:40 PM

Quote:

Originally Posted by fatbass

'71 C20 307 2 bbl. Stock except for HEI.

Attachment 1619264

Good, real life driver engine bay. Thanks.

outfield · 02-06-2017, 04:00 PM

'69 K20 - 350 engine bay, all stock except the addition of the brake booster.

GTORobo · 02-06-2017, 06:18 PM

Here is my all original 1969 CST (except HEI)

**specialtyretail** · 02-06-2017, 08:17 PM

Quote:

Originally Posted by B Myers

Stock air cleaner with 5 1.5" holes cut in the back for air flow, 2.5" corvette manifolds, black cap HEI, electric choke QJ, one wire alternator. Very stock looking but good performance and driveability upgrades, not that I have been driving it lol, in a few weeks I hope.
Attachment 1619303

That is what I am looking for. Thanks, Fred.

CST10 · 02-06-2017, 09:52 PM

As stock as it gets. All original 1968 250CI.

**specialtyretail** · 02-07-2017, 08:33 PM

Quote:

Originally Posted by CST10

As stock as it gets. All original 1968 250CI.

Cool....

bill3rail · 02-08-2017, 12:26 AM

Quote:

Originally Posted by CST10

As stock as it gets. All original 1968 250CI.

Still need that air cleaner for mine!

Bill

**71CHEVYSHORTBED402** · 02-08-2017, 12:32 AM

Quote:

Originally Posted by Ekliptix

Like you, I'm of the mind "Chrome don't get ya home".
Mine, in progress. Still need to add the air cleaner sticker and valve cover sticker.

Before (stock 350)

402 big block getting painted. Edelbrock heads, comp cam, intake.

Need to hook up the AC again. Change the plug wires to black. Change the oil breather to whatever stock is.

Nice.........................A lot of nice engine bays here.

**specialtyretail** · 02-08-2017, 05:18 PM

Very nice... engine porn.....

CST10 · 02-08-2017, 05:36 PM

Quote:

Originally Posted by bill3rail

Still need that air cleaner for mine!

Bill

That's the original oil bath air cleaner and it's also list as one of the 2 opinions on the SPID.

02-04-2017, 01:26 PM	#26
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,859	Re: Stock appearing engine bays... Little mix of both...... Attached Images __________________ 1967 C10 SWB Owner - Rustbelt Restorations

02-04-2017, 08:48 PM	#28
dennislbrooks Senior Member Join Date: Feb 2004 Location: Williamsburg, Ohio Posts: 1,798	Re: Stock appearing engine bays... My attempt. Attached Images __________________ 1942 Chevy 1/2 ton Rod, 1959 GMC 1/2 ton Fleet Stepside, 1967 Chevy SWB K10, 1985 Corvette Coupe 4+3, 2015 Chevy Duramax reg cab 4WD W/T

02-05-2017, 11:13 AM	#30
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Stock appearing engine bays... My Ramp truck has a stock looking bay. Right down to the rust and oil to match! Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

02-05-2017, 01:02 PM	#31
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,634	Re: Stock appearing engine bays... I can relate..... __________________ Our paypal is specialtyretail@yahoo.com Please DO NOTsend paypal funds as a gift, right is right. Thanks.... Sorry, we CANNOT ship larger parts. Thanks.

02-05-2017, 01:54 PM	#33
slikside Registered User Join Date: Jun 2010 Location: San Diego Co. Posts: 1,179	Re: Stock appearing engine bays... Mine. Exceptions are HEI, and missing Air Injector Pump and its associated air manifols on the exhaust manifolds. Attached Images __________________ 1972 Chevy C-10, SWB, Fleet, 350/350, PS, PB, HEI, mostly stock, Survivor.

02-05-2017, 02:06 PM	#34
joeydurango Registered User Join Date: Dec 2013 Location: Durango, CO Posts: 827	Re: Stock appearing engine bays... Some of these bays are immaculate. Looks awesome. But you folks must never drive on dirt roads... I can't even begin to keep mine that clean. Gonna have to do a spring deep clean. __________________ 1972 K10 Cheyenne Super \| LWB, fleetside \| 350/350/205 \| KEEPER 1971 K10 Cheyenne \| SWB, fleetside \| LS Swap 5.3/4L60 \| SOLD 1976 Trans Am \| 400/4-spd \| SOLD 1976 Trans Am \| 455/4-spd \| TOTALED

02-05-2017, 02:13 PM	#35
davepl Registered User Join Date: Aug 2006 Location: Redmond, WA Posts: 6,332	Re: Stock appearing engine bays... Here are mine... one's a truck, the other a car... Attached Images __________________ 1970 GMC Sierra Grande Custom Camper - Built, not Bought 1969 Pontiac 2+2 427/390 4-speed Coupe 1969 Pontiac 2+2 427/390 4-speed Convertible

02-06-2017, 12:42 AM	#36
el_fantasma Registered User Join Date: Oct 2016 Location: Redwood City CA Posts: 566	Re: Stock appearing engine bays... 350 Attached Images __________________ 72 White Cheyenne, The Ghost

02-06-2017, 09:33 AM	#37
bill3rail Registered User Join Date: Jul 2013 Location: LI, NY 11801 Posts: 1,140	Re: Stock appearing engine bays... Other than the air cleaner, which I have since replaced... Some pictures missed the request for stock engine bays. __________________ 1970 C10 8' Fleetside, L6 250, 3 on the Tree. The most basic of pickup trucks!

02-06-2017, 10:09 AM	#38
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,634	Re: Stock appearing engine bays... Digging on the six cylinder.... __________________ Our paypal is specialtyretail@yahoo.com Please DO NOTsend paypal funds as a gift, right is right. Thanks.... Sorry, we CANNOT ship larger parts. Thanks.

02-06-2017, 10:57 AM	#39
fatbass Registered User Join Date: May 2012 Location: South Ogden, Utah Posts: 172	Re: Stock appearing engine bays... '71 C20 307 2 bbl. Stock except for HEI.

02-06-2017, 11:56 AM	#40
B Myers Registered User Join Date: Feb 2016 Location: Murphysboro Illinois Posts: 119	Re: Stock appearing engine bays... Stock air cleaner with 5 1.5" holes cut in the back for air flow, 2.5" corvette manifolds, black cap HEI, electric choke QJ, one wire alternator. Very stock looking but good performance and driveability upgrades, not that I have been driving it lol, in a few weeks I hope.

02-06-2017, 04:00 PM	#42
outfield Registered User Join Date: Apr 2016 Location: Portland, Or Posts: 387	Re: Stock appearing engine bays... '69 K20 - 350 engine bay, all stock except the addition of the brake booster. Attached Images

02-06-2017, 06:18 PM	#43
GTORobo Registered User Join Date: Jan 2017 Location: Fort Worth, TX Posts: 19	Re: Stock appearing engine bays... Here is my all original 1969 CST (except HEI) Attached Images

02-06-2017, 09:52 PM	#45
CST10 Registered User Join Date: Sep 2013 Location: Gonzales, La Posts: 1,441	Re: Stock appearing engine bays... As stock as it gets. All original 1968 250CI. Attached Images __________________ MyToys: Goldilocks the "Ol School Survivor" 1968 C10, SWB Stepside, 08/15 TOTM, 250 CI 6 cylinder, 3 on the tree, 3.73 rear, 3/5 static drop, 23,500 original miles. Samson the 1970 CST10, LWB, 462Ci, Turbo 350 tranny, 3.08 rear gear, PB, PS, A/C, AM/FM, 2/4 Drop. Brutus the 1998 Camaro Z28, 33,500 original miles, LS1, 519 RWHP/497 RWTQ. Member of the Louisiana Classic Truck Club, LCTC Member of the Louisiana C10 Club Member of the Baton Rouge Drifters Car Club



Register or Log In To remove these advertisements.

02-08-2017, 05:18 PM	#49
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,634	Re: Stock appearing engine bays... Very nice... engine porn..... __________________ Our paypal is specialtyretail@yahoo.com Please DO NOTsend paypal funds as a gift, right is right. Thanks.... Sorry, we CANNOT ship larger parts. Thanks.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.