VA 1972 Big Block Setup complete or sold individually

[randy500]

Originally Posted by VA72C10

The 320 is just for the A/C brackets that are designed to work with the smog setup....what I've seen that rare setup sell for on here. The smog setup with pump, brackets, hoses, and manifolds with tubes will be much more- they run around 1200 new and aren't factory correct....

67 kid will have first dibs on smog setup once I decide what to do.

Ok, your ad sounded like the A/C and Smog set up together, I will pass on the A/C brackets then. The difference with SMOG on the A/C brackets is just the intake manifold bracket, non-smog has the cast iron "U" shaped bracket and smog has the bent steel bracket that mounts the smog pump and has the tab for the A/C compressor adjustment arm.

[mikey13]

Interested in fan and shroud, interns in power steering set up with reservoir depending on price.

[mikey13]

Is kick down and exhaust hangers still available? The bb pulleys are all ps, alt crank and a/c?

[Cheyenne1970]

I am interested in the fan blade would it be possible for you to post a picture of it?

[jpgl]

va72c10 i was wondering if i am next in line for the kickdown bracket and switch?

[VA72C10]

Originally Posted by jpgl

va72c10 i was wondering if i am next in line for the kickdown bracket and switch?

yes...hard to keep track. sorry for any confusion.

[REEDS 72]

Can I get the ps pressure line price shipping will be 84003 thanks And the fuel line from the carb to to the fuel pump. thank you.

[Tdrcreyn4]

Interested in the original spring that attaches to the fresh air vent door under the cowl for the AC as well as the plastic inset that the pin rides in for the same door. The one that is held in place with a plastic nut inside the cab.

[VA72C10]

Originally Posted by REEDS 72

Can I get the ps pressure line price shipping will be 84003 thanks And the fuel line from the carb to to the fuel pump. thank you.

Likely going with PS setup but will let you know if not. Will check fuel return line condition and let you know.

Originally Posted by Cheyenne1970

I am interested in the fan blade would it be possible for you to post a picture of it?

I have others in front. Will post picture and put you in line

Originally Posted by mikey13

Waiting for price on fan and shroud please, shipped to 14052

Will get out first and post pictures and pricing.

Originally Posted by Tdrcreyn4

Interested in the original spring that attaches to the fresh air vent door under the cowl for the AC as well as the plastic inset that the pin rides in for the same door. The one that is held in place with a plastic nut inside the cab.

Likely going to be sold with the complete setup but if I start parting out the A/C I will give you first dibs...

[teds72]

interested in air cleaner / spark aresster 150 shipped does the wing nut and stud included? Thanks Ted

[Ruffin]

If anyone else is interested it the engine mounts and perches let them have them...decided to leave the smallblock in it....
Thanks

[Eagle9502]

Interested in spark plug heat shields and wire looms. Don't think I saw a price on those pieces.

Also interested in the water pump if it's a GM.

[VA72C10]

Originally Posted by mikey13

Interested in fan and shroud, interns in power steering set up with reservoir depending on price.

Will post pictures soon. 250 for power steering pump, reservoir, and brackets. If you want the steering box and lines to the box add another 150. Plus actual shipping

Originally Posted by teds72

interested in air cleaner / spark aresster 150 shipped does the wing nut and stud included? Thanks Ted

160 shipped with wing nut and stud

Originally Posted by Eagle9502

Interested in spark plug heat shields and wire looms. Don't think I saw a price on those pieces.

Also interested in the water pump if it's a GM.

Will verify pump- I believe it is. Not sure how many heat shields are there and in good shape (it's not 8). Will see how complete wire looms are. Will price once I know how much is there.

[Chuck K]

If you sell the intake what are you asking. Thanks

[70 shorty]

I keep saying to myself I need to get over to the other side of town and see your stash of parts. I'm sure you've got stuff I could use on my 70. Do you by chance have any decent doors or fenders?

[VA72C10]

Originally Posted by Chuck K

If you sell the intake what are you asking. Thanks

I will be selling it. Likely the heads too. Going to go higher performance for the build I'm doing... Trying to figure a fair value- haven't seen any for sale here recently...

Originally Posted by 70 shorty

I keep saying to myself I need to get over to the other side of town and see your stash of parts. I'm sure you've got stuff I could use on my 70. Do you by chance have any decent doors or fenders?

I have some Decent 67 doors and fenders but not great I sold most of my collection before I moved. Don't have nearly as much as I used to but do have the burb, a swb frame we're going to build up, and the 70 project that's going to be a 67 tribute build...

[VA72C10]

Fan shroud. Will come with two good clips and the top screws. It has one blemish at the top I see (pictured). No holes or cracks.

[VA72C10]

Air cleaner and spark arrestor and carb w/ part number.

Also alternator brackets and hardware bagged and the heat riser tube

[VA72C10]

AC brackets and smog pump with brackets

[Tdrcreyn4]

I was first in line for the TH 400 kick down and BB heat shield. Have you decided on a price yet?

[VA72C10]

Originally Posted by Tdrcreyn4

I was first in line for the TH 400 kick down and BB heat shield. Have you decided on a price yet?

Do you want everything for the kickdown (pedal, bracket, wiring)?

[Tdrcreyn4]

Originally Posted by VA72C10

Do you want everything for the kickdown (pedal, bracket, wiring)?

Yep sure do.
Posted via Mobile Device

[VA72C10]

Originally Posted by Tdrcreyn4

Yep sure do.
Posted via Mobile Device

120 shipped for heat shield and kickdown with bracket, wiring, pedal, and hardware.

[VA72C10]

Originally Posted by cwilkie

How much for the air cleaner and spacer? That is if it is not spoken for.

A couple in line but I'll let you know if they pass

Originally Posted by cwilkie

And the th400 steel modulator line.

You're first in line...let me see if I'm going to use that or not...I'm keeping the trans...

[cwilkie]

How much for the air cleaner and spacer? That is if it is not spoken for.