My 67' Swb On Air Ride & 18's & 20's

[kxmotox247]

Yep... I almost sold it. Had to come up with some money for a garage/shop and had to sell a vehicle. My cycle sold first so we kept the truck.

[Crank]

Well since you're here Kxmoto, why not grace us with some updated pictures for my pictures folder??? We'd all appreciate it.
Brandon

[itsmike2k]

Wnad whats the spec on the wheels? I know they are 18's and 20's but what is the Back Spacing? is it 5 lug and if so did you sway to a 71-72 rear? thanks

[rough69]

Truck looks beefy like a fresh pack of Jack's Links bro!

I'd like to know how much of a drop you can get out of it fully aired up and down.

Will it lay on the frame / rear end?

[SCOTI]

IIRC . . .... it was 18x8 w/5.25" BS up front & 20x10 w/4" BS in the back. It has (had) 5x4.75" car pattern w/a Camaro/f-body rear 12bolt vs. the truck rear (which makes it about 2" or so narrower than a truck housing).

Let's see how well I retain 'important & useful' information .

[Louis72]

beautiful truck

[kxmotox247]

Thanks for the compliments. The truck was pretty much put together exactly the way you've seen it by the previous owner. He put the wheels on there so I'm not sure of the exact backspacing. I would guess reversed rims on the rear with the very minimum backspacing and the front wheels appear to be standard spacing for a 18 x 8. Early camaro 10-bolt rear... passenger car pattern all the way around. Pretty close SCOTI
It doesn't lay frame but it sits really nice. Low enough for me. I've cleaned the interior up on it (dynamat, new carpet, tach conversion) and stopped a handfull of oil leaks but that's it. New exhaust too. The engine compartment needs cleaned up and I have most of the stuff to do it but I've been strapped on time and it runs fine the way it is.
I was thinking about driving it to the Board Meet this weekend but that's a pretty long haul on short notice...especially with a pregnant wife with no working A/C and no hotel reservations.

These are pretty much the only pictures that I have of my trucks.

http://www.villagephotos.com/pubbrow...der_id=1663655

[lolife99]

kxmotox247,... Any chance you would be willing to part with it?

[kxmotox247]

I don't know if I would sell it right now or not. I needed some money earlier but I sold my bike instead.

[kombreeze]

I love that classic look....by far one of my favorites...sorry that I may go the same route out here in central cali...

[FRENCHBLUE72]

That has always been one of my favorite rides on the board...

[timzrides]

what happened to member babyblue. word was that he wasn't feeling to well. is everything ok?

[Painter D]

your truck sits exactly like mine

[bigtom]

sweet looking truck its my new screen saver,if you dont mind me asking what did you get for the bike?

[pharcydekm]

Nice truck! I would think that the 20 x10 in the rear would have 6" backspace to sit in the fenders. I have been researching putting 22 x 10 on the rear of mine but I would love a confirmation on that if you would.

I love these trucks but I would KILL for that Chevelle!!!!!!

[kxmotox247]

The wheels are much closer to somewhere around 3-4" of backspacing. I have a different rearend so the wheels fit different in the opening.
Thanks for all the compliments!

The bike sold for $26K.

[jkaylor68gmc]

That truck is bad!!! I love it!!! Now I am sad I sold mine to TRI-PRO!

[72BlckButy]

lolife99...i would love it if you were able to purchase this truck, then I could get a better look at it as well.

[Bishops Trucks]

Nice ride.