Arkansas K10 - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**davischevy** · 09-30-2019, 06:01 PM

The chassis is coming around after several doses of degreaser. I washed the 55 while I was waiting for the degreaser to soak.yeah she's a picture whore.

KMC3420 · 09-30-2019, 11:48 PM

Just seeing this Larry, following along now! Do you own Davis construction? I saw that 55 rolling past Fedex today as I was leaving for lunch. Nice car, and this truck is gonna be slick when done.

**davischevy** · 09-30-2019, 11:55 PM

Quote:

Originally Posted by KMC3420

Just seeing this Larry, following along now! Do you own Davis construction? I saw that 55 rolling past Fedex today as I was leaving for lunch. Nice car, and this truck is gonna be slick when done.

Thanks. My kids own controlling interest in the company now and they support my habit.

KMC3420 · 09-30-2019, 11:57 PM

Quote:

Originally Posted by davischevy

Thanks. My kids own controlling interest in the company now and they support my habit.

Haha! Good for you. I haven’t seen that red/white two wheel drive around town though, sharp looking truck.

**zicc1835** · 10-14-2019, 10:47 PM

The 55 is sweet and inspiring ......she can be a ho

**davischevy** · 10-14-2019, 11:16 PM

Quote:

Originally Posted by zicc1835

The 55 is sweet and inspiring ......she can be a ho

I subscribed to your thread on the tri five site.

**davischevy** · 10-31-2019, 03:32 PM

The Yoke on the front drive shaft has a Chevrolet orange inspection mark on the u-bolts.

**davischevy** · 10-31-2019, 06:23 PM

The front pinion nut has a white inspection mark.

**davischevy** · 11-19-2019, 11:19 AM

Frame and associated parts are at the powder coaters. I detailed my first assembly.

**DeadheadNM** · 11-19-2019, 07:01 PM

Looking good

**davischevy** · 11-22-2019, 10:03 PM

One more assembly detailed (For the most part).

**IronCanine** · 11-27-2019, 12:47 AM

Larry...thanks for the heads up on this thread. I just don't click into the 4x4 section much...which is stupid, because that's all we do. I'm so pumped about all the inspection markings. Thanks for taking time to document them. I'm especially excited because my K20 is a Fremont truck and I thought I'd have to tone it down a bit on the graffiti...but nope, those trucks got marked up pretty well too it seems. Excited for the follow. Great work so far. Keep it up and thanks for sharing.

**zicc1835** · 11-27-2019, 09:57 AM

Quote:

Originally Posted by davischevy

One more assembly detailed (For the most part).

inspiring....I got to get my priorities back in order ...park and cover the 55

**mongocanfly** · 11-27-2019, 04:26 PM

Nice frame work other Larry..!!

**davischevy** · 11-27-2019, 07:53 PM

Quote:

Originally Posted by davischevy

The front pinion nut has a white inspection mark.

If you look closely you can see the orange paint on the u bolt on the left.

**jaros44sr** · 11-29-2019, 09:13 AM

I'll follow, great build so far, can't wait for more, how did you get the drive shaft so shiny?

**davischevy** · 11-29-2019, 10:40 AM

Quote:

Originally Posted by jaros44sr

I'll follow, great build so far, can't wait for more, how did you get the drive shaft so shiny?

Wire brush and Krylon satin clear.

**davischevy** · 11-29-2019, 05:46 PM

"X" on the rear differential.

**davischevy** · 12-19-2019, 11:59 PM

I picked up the frame and associated parts today from the powder coater. I got the frame positioned over the axles and hope to start assembly tomorrow.

67C10Step · 12-20-2019, 09:31 AM

Looking better than good, looking great. Got a powder coater locally in Harrison or do you have to go a distance? I'm about to call a few around here about some wheels I want to get done.

KMC3420 · 12-20-2019, 11:10 AM

Quote:

Originally Posted by 67C10Step

Looking better than good, looking great. Got a powder coater locally in Harrison or do you have to go a distance? I'm about to call a few around here about some wheels I want to get done.

Same question for me? Are you using the one down by the 7 north intersection? Across from National Auto Trim? Progress is looking awesome!

**davischevy** · 12-20-2019, 01:22 PM

I had this done at Industrial Powder Coating in Mt Home.

The one at HWY 43 and HWY 7 north sold out and is a production operation now. No PC for the public anymore. He said maybe later.

There is a PC at Berryville and one at Nixa, MO.

I am going to take the sheet metal to Mt, Home to get it dustless blasted.

**Ol Blue K20** · 12-26-2019, 11:18 PM

I just found this. ...Subscribed!!!

**davischevy** · 12-27-2019, 01:58 AM

I detailed small parts and final clean on engine transmission and transfer case this week. I committed to pulling the steering column out of the Corvette for rebuilding by Monday so it may be next week before I make more progress here.

**davischevy** · 01-03-2020, 11:48 PM

Fuel and brake lines are about all I accomplished this week. dozerbill72 came by this afternoon and gave me approval to forge ahead.

09-30-2019, 06:01 PM	#26
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,863	Re: Arkansas K10 The chassis is coming around after several doses of degreaser. I washed the 55 while I was waiting for the degreaser to soak.yeah she's a picture whore. Attached Images __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

09-30-2019, 11:48 PM	#27
KMC3420 Registered User Join Date: Dec 2012 Location: Harrison, AR Posts: 1,065	Re: Arkansas K10 Just seeing this Larry, following along now! Do you own Davis construction? I saw that 55 rolling past Fedex today as I was leaving for lunch. Nice car, and this truck is gonna be slick when done. __________________ Keagan 68 SWB C-10 original 350 A/C 503 Mean Green

10-14-2019, 10:47 PM	#30
zicc1835 Senior Member Join Date: Mar 2011 Location: Hanover NJ Posts: 4,302	Re: Arkansas K10 The 55 is sweet and inspiring ......she can be a ho __________________ Grand Theft Auto https://67-72chevytrucks.com/vboard/...d.php?t=855961 Doc & Kim build http://67-72chevytrucks.com/vboard/s...d.php?t=722288 I am from the desert http://67-72chevytrucks.com/vboard/s...d.php?t=650332 basket case build SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=648557

10-31-2019, 03:32 PM	#32
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,863	Re: Arkansas K10 The Yoke on the front drive shaft has a Chevrolet orange inspection mark on the u-bolts. Attached Images __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

10-31-2019, 06:23 PM	#33
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,863	Re: Arkansas K10 The front pinion nut has a white inspection mark. Attached Images __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

11-19-2019, 11:19 AM	#34
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,863	Re: Arkansas K10 Frame and associated parts are at the powder coaters. I detailed my first assembly. Attached Images __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

11-19-2019, 07:01 PM	#35
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,449	Re: Arkansas K10 Looking good __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

11-22-2019, 10:03 PM	#36
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,863	Re: Arkansas K10 One more assembly detailed (For the most part). Attached Images __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

11-27-2019, 12:47 AM	#37
IronCanine I'm trying.... Join Date: Oct 2013 Location: Athens, GA Posts: 2,758	Re: Arkansas K10 Larry...thanks for the heads up on this thread. I just don't click into the 4x4 section much...which is stupid, because that's all we do. I'm so pumped about all the inspection markings. Thanks for taking time to document them. I'm especially excited because my K20 is a Fremont truck and I thought I'd have to tone it down a bit on the graffiti...but nope, those trucks got marked up pretty well too it seems. Excited for the follow. Great work so far. Keep it up and thanks for sharing. __________________ 1970 K20 Z62 https://67-72chevytrucks.com/vboard/...56#post9334756 1970 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=645076 1969 K10 SWB CST http://67-72chevytrucks.com/vboard/s...52#post8520352 1971 K20 Z84 https://67-72chevytrucks.com/vboard/...90#post9047290 1946 B.F. Avery Model A Tractor http://67-72chevytrucks.com/vboard/s...55#post8292555 "Sometimes I wonder if zander208 was even real..."

11-27-2019, 04:26 PM	#39
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,673	Re: Arkansas K10 Nice frame work other Larry..!! __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

11-29-2019, 09:13 AM	#41
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,766	Re: Arkansas K10 I'll follow, great build so far, can't wait for more, how did you get the drive shaft so shiny? __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

11-29-2019, 05:46 PM	#43
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,863	Re: Arkansas K10 "X" on the rear differential. Attached Images __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless. Last edited by davischevy; 11-29-2019 at 06:26 PM.

12-19-2019, 11:59 PM	#44
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,863	Re: Arkansas K10 I picked up the frame and associated parts today from the powder coater. I got the frame positioned over the axles and hope to start assembly tomorrow. Attached Images __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

12-20-2019, 09:31 AM	#45
67C10Step Registered User Join Date: Jul 2019 Location: Beebe, AR Posts: 2,475	Re: Arkansas K10 Looking better than good, looking great. Got a powder coater locally in Harrison or do you have to go a distance? I'm about to call a few around here about some wheels I want to get done. __________________ 1967 C10 1980 Jeep CJ5 2020 Toyota 4Runner 2024 Toyota Tundra

12-20-2019, 01:22 PM	#47
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,863	Re: Arkansas K10 I had this done at Industrial Powder Coating in Mt Home. The one at HWY 43 and HWY 7 north sold out and is a production operation now. No PC for the public anymore. He said maybe later. There is a PC at Berryville and one at Nixa, MO. I am going to take the sheet metal to Mt, Home to get it dustless blasted. __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.



Register or Log In To remove these advertisements.

12-26-2019, 11:18 PM	#48
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,245	Re: Arkansas K10 I just found this. ...Subscribed!!! __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

12-27-2019, 01:58 AM	#49
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,863	Re: Arkansas K10 I detailed small parts and final clean on engine transmission and transfer case this week. I committed to pulling the steering column out of the Corvette for rebuilding by Monday so it may be next week before I make more progress here. __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

01-03-2020, 11:48 PM	#50
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,863	Re: Arkansas K10 Fuel and brake lines are about all I accomplished this week. dozerbill72 came by this afternoon and gave me approval to forge ahead. Attached Images __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.