Canada window frames, doors and hoods

[padresag]

i will figure out what everyuthing is worth and message you
thks
ron

[jonsey]

Hi Ron,
How about some tailgate chains and all the other components that go with it?
Fleetside long bed steel spacers?
Wiper arms?
Rear bumper....paintable no chrome.
That's all for now

[padresag]

Originally Posted by jonsey

Hi Ron,
How about some tailgate chains and all the other components that go with it?
Fleetside long bed steel spacers?
Wiper arms?
Rear bumper....paintable no chrome.
That's all for now

pm me your phone nbr.only thing that i don't have is a rear pickup bumper but do have suburban rears
ron

[aotte1]

Ron,
Do you have any fleetside sport rear bumpers, prefere chrome, will consider painted. Also bumper brackets. Any rock guards ( go between body and bumper). Would like very nice condition. 64 to 66’.
What are you doing with all your literature?

Thanks,
Les

[padresag]

Originally Posted by aotte1

Ron,
Do you have any fleetside sport rear bumpers, prefere chrome, will consider painted. Also bumper brackets. Any rock guards ( go between body and bumper). Would like very nice condition. 64 to 66’.
What are you doing with all your literature?

Thanks,
Les

no pu stuff except for some box cross braces, taillights and fender braces
literature composes of assy manual, the 63 shop manual and the 66 supplement. also chilton's truck and van repair manual 71-78
ron

[pimpston65]

any updates on shipping cost?

[Subdude59]

Are the pair of exceptional condition 64-66 doors without speaker holes still avail? I think they are white exterior color. If so, shipping to 47201 and total price needed. Thx. PS. I'm looking for a rare mirror mounted compas as well

[padresag]

Originally Posted by Subdude59

Are the pair of exceptional condition 64-66 doors without speaker holes still avail? I think they are white exterior color. If so, shipping to 47201 and total price needed. Thx. PS. I'm looking for a rare mirror mounted compas as well

they are in grey primer. i did go back and have a much closer look at them and they have both had work done on the bottoms and have revalued them at 125.00 ea. i took them off a truck that i parted out 10 years ago and they have just been stored until i pulled them out here a bit ago. sorry about that. if i had sent them to anybody i think that they would be cutting some parts out of me and throwing in a handful of salt
ron

[Subdude59]

Ron, do you have any oem interior suburban ceiling panels with the perforated material glued to cardboard? I think there are 3 or 4 of those pieces. Interested in a full set. Thx

[padresag]

Originally Posted by Subdude59

Ron, do you have any oem interior suburban ceiling panels with the perforated material glued to cardboard? I think there are 3 or 4 of those pieces. Interested in a full set. Thx

no i don't
ron

[padresag]

everything I have is sold except for the current 2 for suburban window locks ans a 230 -250 i6 p/s pump brkts,
I thank all off you for what purchases that you have made from me in the past and this link will explain
http://67-72chevytrucks.com/vboard/s...d.php?t=765818
ron

[AJCK87]

Originally Posted by padresag

1 pic is drivers side and tubs are good also as they were covered their whole life. from an ambulance
2 and 3 are pass side



if there is anything of any use to you i can cut out whatever you need
ron

Hey Ron,

I would be interested in the drivers side of the ambulance, I need a rear cab corner and fuel filler section for a second tank on the panel. What are you asking for that piece? and do you have any more pictures of the drivers side? I’m up in Port McNeill but I will be moving to Duncan at the end of the morning month. Looks like we will be swapping locations eh hahah

[pimpston65]

got my package yesterday, awesome pieces. now i just gotta figure when the gaskets all go!!!

[padresag]

Originally Posted by AJCK87

Hey Ron,

I would be interested in the drivers side of the ambulance, I need a rear cab corner and fuel filler section for a second tank on the panel. What are you asking for that piece? and do you have any more pictures of the drivers side? I’m up in Port McNeill but I will be moving to Duncan at the end of the morning month. Looks like we will be swapping locations eh hahah

i have sold everything, but if you pm me your email and I will pass it in to the new owner. I had previously had cut out that rear corner and sold it a few years ago. there were 2 gas doors and he may be willing to part with one

this is what is left of the drivers side

ron

[padresag]

Originally Posted by pimpston65

got my package yesterday, awesome pieces. now i just gotta figure when the gaskets all go!!!

Hey Pimp; i just found these that were sitting on a batch of windows that I was just clearing out. 3 are really good and one has some surface rust on the back side. they are yours if you want and I will split the postage so that won't be much

ron

[Slowclimb]

you get any more window frames like those let me know mines a 66 K1406 THanks

[padresag]

Originally Posted by Slowclimb

you get any more window frames like those let me know mines a 66 K1406 THanks

pretty well everything that i have has been sold. there are a few things still and i will list them when i get to sayward in cl and used. i will be there on the 22nd but it will take a few more months till it gets sorted out
thks
ron

[Slowclimb]

Lol Sayward enjoy the fishing in the Salmon River