52 pickup door panel (interior)

[oldman3]

Pic 1 I've already stapled material at bottom of pleats, glue two pieces of lauan together and stapled.

Pic 2 Now spray glue on bottom section and material.

Forget to show smoothing material over wood.

Pic 3 This show bottom section, material folded over, stapled and excess material removed.

[oldman3]

Forgot to mention, to sand the arm rest, to remove shine from fiberglass, so glue will stick to arm rest.

Pic 1 Arm and material sprayed with glue, now roll material up onto the arm rest.

Pic 2 Here's back side, glue on arm rest and material, ready to come together as before.

Pic 3 This show the excess material that needs to be pulled. I'm working out the wrinkles. It's hard to get them all out with this material, because of how thick it is. A different vinyl would maybe easier.

Pic 4 Not a good pic, but you get the ideal of how it looks, after pulling and pulling material. Sometimes you can't get out all the wrinkles, just do the best you can. If you don't think you want to try, you could always paint them.

Pic 5 Finished driver panel.

[oldman3]

Hope this may help someone that want's a easy panel to build for their ride. Any questions, I will try to answer.

[oldman3]

For those that find this thread, I should also mention that I did another style of door panels, back about 4 yrs ago. It has alot more detail on that panel. Here is the link http://67-72chevytrucks.com/vboard/s...d.php?t=662380 ...Jim

[8man]

Jim, that is great work. Thank you for sharing.

[oldman3]

Originally Posted by 8man

Jim, that is great work. Thank you for sharing.

Robert, Thank you. I don't do interior work very much, so I thought it might help someone. Thanks again for checking in out...Jim

[Rickysnickers]

That's a really great write up! Thank you. A couple of questions, how are you going to attach the panel to the door? And, if you have the door release lever and a window crank, i.e. a TF truck, do you cut those hole before or after the material is laid down?

[oldman3]

Originally Posted by Rickysnickers

That's a really great write up! Thank you. A couple of questions, how are you going to attach the panel to the door? And, if you have the door release lever and a window crank, i.e. a TF truck, do you cut those hole before or after the material is laid down?

First thank you. The owner of the truck wanted to use screws with black caps to hold the panel in place. Not how I wanted to do it, but he's the boss. Said he wanted to take it off himself if needed.

I would cut the holes first to fit everything and make sure they work. You could always make the hole larger for clearance, but a small cut in material would allow the crank to come thru...Jim

[doowoppwer]

Beautiful work Jim. I double checked and I don't think you mentioned the spacing for the slats.

Roger

[oldman3]

Originally Posted by doowoppwer

Beautiful work Jim. I double checked and I don't think you mentioned the spacing for the slats.

Roger

Thanks Roger. Most of the time I use 1/4" for spacing, this allows material on both sides of the slat and looks good. Thanks for checking out the thread...Jim

[blazer2007]

do you think the 3-m glue you used would work for a headliner repair on a 78 chev truck. Can,t buy the proper landeau contact cement here in Canada

[MP&C]

Beautiful work Jim!

[oldman3]

Originally Posted by blazer2007

do you think the 3-m glue you used would work for a headliner repair on a 78 chev truck. Can,t buy the proper landeau contact cement here in Canada

Yes it should work, just make sure you put it on both parts, let is set up at least 5 minutes, lightly place it were you want, then start smoothing it out, once it's goes together under pressure, its impossible to get apart...Jim

[oldman3]

Originally Posted by MP&C

Beautiful work Jim!

Thanks Robert, just trying to keep up with you...Jim

[blazer2007]

thanks, I like doing my own upholstery too and got some good ideas from your article

[oldman3]

Originally Posted by blazer2007

thanks, I like doing my own upholstery too and got some good ideas from your article

Glad you like it, that's the reason for the thread...Jim

[Rickysnickers]

Originally Posted by oldman3

First thank you. The owner of the truck wanted to use screws with black caps to hold the panel in place. Not how I wanted to do it, but he's the boss. Said he wanted to take it off himself if needed.

I would cut the holes first to fit everything and make sure they work. You could always make the hole larger for clearance, but a small cut in material would allow the crank to come thru...Jim

Ok, thank you for that. So, then I'm curious as to how you would hang them on your truck, if you don't mind sharing.

rick

[oldman3]

Originally Posted by Rickysnickers

Ok, thank you for that. So, then I'm curious as to how you would hang them on your truck, if you don't mind sharing.

rick

Rick, don't mind at all. This is a door panel I did 4 yrs ago, it's the way I do most of my door panels. This is the link http://67-72chevytrucks.com/vboard/s...d.php?t=662380 go to post 19 and 20, it shows how I do them. If more questions just ask away...Jim

[Rickysnickers]

Wow, that is awesome. You are making me want to try and do that for my truck. Also, I did not know Reaper was your son. No wonder he has as much talent as he does. He's fortunate to have a dad to have shown/exposed his to this kind of stuff. I wish I would have had that. Thank you for your time!

rick

[oldman3]

Originally Posted by Rickysnickers

Wow, that is awesome. You are making me want to try and do that for my truck. Also, I did not know Reaper was your son. No wonder he has as much talent as he does. He's fortunate to have a dad to have shown/exposed his to this kind of stuff. I wish I would have had that. Thank you for your time!

rick

Rick, thank you for the high praise. That's what this forum is all about, to help and encourage other to try new things. Mark (reaper) talents came thru him, I just gave him the basics, and helped guide. Cars, trucks have been a big part of my life, since I was 13 yrs old, he was around it all his life, never tried to force him in that direction, he just wanted to learn.

Any help I can offer on anything, just ask...Jim

[8man]

Jim, I asked Mark to post a picture of the fender rack you built when he gets time. You wouldn't still have the plans laying around would you? Building one out of wood would pretty easy, and it looks pretty sturdy.

[oldman3]

Originally Posted by 8man

Jim, I asked Mark to post a picture of the fender rack you built when he gets time. You wouldn't still have the plans laying around would you? Building one out of wood would pretty easy, and it looks pretty sturdy.

Robert, never had any plans, just built them to the fenders. I will get some pics together with measurements and post them up. Give me a few days...Jim

[RockinKees]

It looks great Jim!
Never thought it could be so “easy”, Maybe I have to steal your idea in the future...

[oldman3]

Originally Posted by RockinKees

It looks great Jim!
Never thought it could be so “easy”, Maybe I have to steal your idea in the future...

Go right ahead, that's the reason for me doing it...Jim

[oldman3]

Robert (8man), sorry it took so long, but here's some pics and measurements you asked about, hope it helps, any questions, just ask. http://67-72chevytrucks.com/vboard/s...d.php?t=786978 ..Jimm