IA New OEM Glove Box Lock (keyed to your existing locks) - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**argonaut** · 02-29-2020, 06:44 AM

I'd like one of these if you've still have them.

**LockDoc** · 02-29-2020, 09:00 AM

Quote:

Originally Posted by argonaut

I'd like one of these if you've still have them.

PM sent.

Thanks,
LockDoc

**OliveK5** · 11-05-2020, 10:28 PM

I'd like one of these if you've still have them.

**LockDoc** · 11-06-2020, 12:28 AM

Quote:

Originally Posted by OliveK5

I'd like one of these if you've still have them.

Yes I do. PM sent.

LockDoc

Stagerunner · 11-06-2020, 02:11 AM

I’m in line for one

**LockDoc** · 11-06-2020, 11:18 AM

Quote:

Originally Posted by Stagerunner

I’m in line for one

PM sent.

Thanks,
LockDoc

**Rich72C10** · 01-03-2021, 10:58 PM

Thank you LocDoc for having these and being able to key to my truck! It appears one of my keys are original to the truck as the 1st and last numbers can be seen by being on a key chain all these years it has worn the middle two away!! So I had to get my code from my ignition lock cylinder. Which the last two were wore and nearly non-readable!

YouTube video how to get the ignition lock cylinder: Tech Tip - 1967-1972 Chevy C10 Ignition Switch Removal

If you happen to have Allen wrench, size 0.050 fits perfectly in the little hole :-)

**LockDoc** · 01-03-2021, 11:50 PM

Quote:

Originally Posted by Rich72C10

Thank you LocDoc for having these and being able to key to my truck! It appears one of my keys are original to the truck as the 1st and last numbers can be seen by being on a key chain all these years it has worn the middle two away!! So I had to get my code from my ignition lock cylinder. Which the last two were wore and nearly non-readable!

YouTube video how to get the ignition lock cylinder: Tech Tip - 1967-1972 Chevy C10 Ignition Switch Removal

If you happen to have Allen wrench, size 0.050 fits perfectly in the little hole :-)

No problem.

The guy in the video is having a problem because he is not removing the paper clip from the hole after he gets the cylinder turned to the left a little bit, and the clip is binding in the hole. You have to remove the poke tool after the cylinder starts turning.

LockDoc

**Rich72C10** · 01-04-2021, 12:01 AM

I didn't have near his trouble once I switched to my long little Allen wrench! It was a snap to get out. At the very least I learn how to take out the ignition lock cylinder, so I learned something new and useful today. I also took the time to clean it up and gave it some lock graphite lube :-)

geunther · 09-28-2021, 01:52 PM

LockDoc, if you have any, I would like a locking keyed to my ignition. I can send measurements (the key, not mine : ))

**LockDoc** · 09-28-2021, 06:08 PM

Quote:

Originally Posted by geunther

LockDoc, if you have any, I would like a locking keyed to my ignition. I can send measurements (the key, not mine : ))

...

Yes I do. PM returned with payment info.

PM me the measurements. (the key)...

LockDoc

**CS1972** · 01-13-2022, 11:55 AM

LockDoc,

I'm in need of a OEM Glove Box Lock, if you have one let me know the price and your ship to address and I'll get you paid (PayPal). Then I'll send you the key I want the glove box lock keyed to.

Thanks,

**cericd** · 01-13-2022, 12:37 PM

Hi Leon, I'd like one of these OEM glovebox locks if you still have one. I have a set of door locks and an ignition cylinder that I got from you. I can send you pic of the code so that the glovebox lock can be keyed to match. Just let me know.

Thanks

**LockDoc** · 01-14-2022, 02:29 PM

Quote:

Originally Posted by CS1972

LockDoc,

I'm in need of a OEM Glove Box Lock, if you have one let me know the price and your ship to address and I'll get you paid (PayPal). Then I'll send you the key I want the glove box lock keyed to.

Thanks,

Quote:

Originally Posted by cericd

Hi Leon, I'd like one of these OEM glovebox locks if you still have one. I have a set of door locks and an ignition cylinder that I got from you. I can send you pic of the code so that the glovebox lock can be keyed to match. Just let me know.

Thanks

Sending PM's.

Thanks,
LockDoc

**LockDoc** · 01-14-2022, 02:36 PM

Quote:

Originally Posted by cericd

Hi Leon, I'd like one of these OEM glovebox locks if you still have one. I have a set of door locks and an ignition cylinder that I got from you. I can send you pic of the code so that the glovebox lock can be keyed to match. Just let me know.

Thanks

It says your mail box is full so I can't send you payment info.

Thanks,
LockDoc

**cericd** · 01-14-2022, 03:24 PM

Quote:

Originally Posted by LockDoc

It says your mail box is full so I can't send you payment info.

Thanks,
LockDoc

Sorry, should be all good now. I'll send you the code info for what I'd like the lock coded to. Thanks!

Chad Alder · 01-19-2022, 08:13 PM

I need one of these. What's the process?

Thanks!

Chad

**LockDoc** · 01-19-2022, 08:46 PM

Quote:

Originally Posted by Chad Alder

I need one of these. What's the process?

Thanks!

Chad

PM Sent with payment info.

If you read the first post again it pretty much explains the process. If you have any specific questions PM me.

Thanks,

LockDoc

**cericd** · 01-21-2022, 05:37 PM

Got mine today. Works great with the new and old keys. Thanks!

**CS1972** · 01-22-2022, 12:02 AM

Received mine also, all's well in Texas!

**LockDoc** · 01-22-2022, 12:41 AM

-
Good deal guys. Thanks for letting me know...

LockDoc

Chad Alder · 01-31-2022, 12:15 AM

Received mine. Glove box lock is great. Thanks for going thru my door locks, ignition and hatch lock. All look great and are buttery smooth. Great work!

Thanks!

Chad

**LockDoc** · 01-31-2022, 01:32 AM

Quote:

Originally Posted by Chad Alder

Received mine. Glove box lock is great. Thanks for going thru my door locks, ignition and hatch lock. All look great and are buttery smooth. Great work!

Thanks!

Chad

Good deal Chad. Glad you are happy with them. Thanks for letting me know.

LockDoc

Peanut74 · 11-19-2022, 05:40 PM

Need quote for two door locks keyed to the ignition key. Also need the cams and retainers if you have them.

Bob

**LockDoc** · 11-20-2022, 11:41 AM

Quote:

Originally Posted by Peanut74

Need quote for two door locks keyed to the ignition key. Also need the cams and retainers if you have them.

Bob

PM sent.

LockDoc

02-29-2020, 06:44 AM	#1
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: New OEM Glove Box Lock (keyed to your existing locks) I'd like one of these if you've still have them. __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

11-05-2020, 10:28 PM	#3
OliveK5 Junior Member Join Date: Aug 2017 Location: Somerville, MA Posts: 51	Re: New OEM Glove Box Lock (keyed to your existing locks) I'd like one of these if you've still have them. __________________ 1970 Chevy K/5 Blazer - 4x4/TOT/307 1970 Chevy K20 - 508 Dark Blue, LWB, 4x4, 350, Automatic, Posi Jim Don't let the sound of your own wheels drive you crazy

11-06-2020, 02:11 AM	#5
Stagerunner Registered User Join Date: Feb 2015 Location: St. Louis, mo Posts: 66	Re: New OEM Glove Box Lock (keyed to your existing locks) I’m in line for one

01-03-2021, 10:58 PM	#7
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,688	Re: New OEM Glove Box Lock (keyed to your existing locks) Thank you LocDoc for having these and being able to key to my truck! It appears one of my keys are original to the truck as the 1st and last numbers can be seen by being on a key chain all these years it has worn the middle two away!! So I had to get my code from my ignition lock cylinder. Which the last two were wore and nearly non-readable! YouTube video how to get the ignition lock cylinder: Tech Tip - 1967-1972 Chevy C10 Ignition Switch Removal If you happen to have Allen wrench, size 0.050 fits perfectly in the little hole :-) __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| Upgraded Fully Super Trim Last edited by Rich72C10; 01-03-2021 at 11:11 PM.*

01-04-2021, 12:01 AM	#9
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,688	Re: New OEM Glove Box Lock (keyed to your existing locks) I didn't have near his trouble once I switched to my long little Allen wrench! It was a snap to get out. At the very least I learn how to take out the ignition lock cylinder, so I learned something new and useful today. I also took the time to clean it up and gave it some lock graphite lube :-) __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| *Upgraded Fully Super Trim

09-28-2021, 01:52 PM	#10
geunther Registered User Join Date: Apr 2005 Location: Cheyenne, WY Posts: 742	Re: New OEM Glove Box Lock (keyed to your existing locks) LockDoc, if you have any, I would like a locking keyed to my ignition. I can send measurements (the key, not mine : ))

01-13-2022, 11:55 AM	#12
CS1972 Senior Member Join Date: Jun 2018 Location: Austin Texas Posts: 448	Re: New OEM Glove Box Lock (keyed to your existing locks) LockDoc, I'm in need of a OEM Glove Box Lock, if you have one let me know the price and your ship to address and I'll get you paid (PayPal). Then I'll send you the key I want the glove box lock keyed to. Thanks, __________________ Ron 1972 Cheyenne Super 1/2 ton LWB 4x4 - Grapefruit Yellow / White

01-13-2022, 12:37 PM	#13
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,137	Re: New OEM Glove Box Lock (keyed to your existing locks) Hi Leon, I'd like one of these OEM glovebox locks if you still have one. I have a set of door locks and an ignition cylinder that I got from you. I can send you pic of the code so that the glovebox lock can be keyed to match. Just let me know. Thanks __________________ Chris My 1970 SWB C/10 - https://67-72chevytrucks.com/vboard/...d.php?t=534872

01-19-2022, 08:13 PM	#17
Chad Alder Registered User Join Date: Dec 2017 Location: Denver Colorado Posts: 47	Re: New OEM Glove Box Lock (keyed to your existing locks) I need one of these. What's the process? Thanks! Chad

01-21-2022, 05:37 PM	#19
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,137	Re: New OEM Glove Box Lock (keyed to your existing locks) Got mine today. Works great with the new and old keys. Thanks! __________________ Chris My 1970 SWB C/10 - https://67-72chevytrucks.com/vboard/...d.php?t=534872

01-22-2022, 12:02 AM	#20
CS1972 Senior Member Join Date: Jun 2018 Location: Austin Texas Posts: 448	Re: New OEM Glove Box Lock (keyed to your existing locks) Received mine also, all's well in Texas! __________________ Ron 1972 Cheyenne Super 1/2 ton LWB 4x4 - Grapefruit Yellow / White

01-22-2022, 12:41 AM	#21
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,402	Re: New OEM Glove Box Lock (keyed to your existing locks) - Good deal guys. Thanks for letting me know... LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

01-31-2022, 12:15 AM	#22
Chad Alder Registered User Join Date: Dec 2017 Location: Denver Colorado Posts: 47	Re: New OEM Glove Box Lock (keyed to your existing locks) Received mine. Glove box lock is great. Thanks for going thru my door locks, ignition and hatch lock. All look great and are buttery smooth. Great work! Thanks! Chad

11-19-2022, 05:40 PM	#24
Peanut74 Registered User Join Date: May 2018 Location: Prattville, AL Posts: 590	Re: New OEM Glove Box Lock (keyed to your existing locks) Need quote for two door locks keyed to the ignition key. Also need the cams and retainers if you have them. Bob __________________ -------------------------------------------------------- 1967 C10 "Snowball" (Currently in a million pieces down from a bazillion) 1989 Toyota DLX pickup "The Hulk" 2012 Jeep JKU "Crush" 1976 Chevy short bed with a 327 and 3 on the tree (Sold it to buy the Blazer) 1971 Chevy Blazer (Sold it)

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.