Parting out a 68 LWB 2wd - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

my68beatertruck · 12-31-2003, 04:53 PM

bottom of hood

my68beatertruck · 12-31-2003, 04:54 PM

another bottom

my68beatertruck · 12-31-2003, 04:58 PM

zyggy, here's a pic of the drivers side fender front molding, it's pretty beat up. pm me if you're still interested. thanks

zyggy72 · 12-31-2003, 05:02 PM

I'm up in the New York / Mass. corner of CT. I'll take the two grill pieces of trim, the hood trim, and the passenger front fender tip trim. How much do you want for them? For shipping, I could make it a day trim to come down and pick the trim up.

spencra · 12-31-2003, 05:04 PM

Are you sure that the dent on the front between the e and the t isn't just on the trim? And I hate to be a pain in the butt, but if you could yank that trim off the front of the hood so I could get a peek I would appreciate it. That is really the only part of the hood that I am worried about. Like I said I have alot of rust damage on my hood in that area and it isn't fun trying to patch it up. Thanks again.

zyggy72 · 12-31-2003, 05:08 PM

Spencra, if there is a dent in the hood between the E & T, you could tap it out some through one of the holes in the underside and then fill and smooth the rest.

my68beatertruck · 12-31-2003, 05:09 PM

sorry larry, i just got a good look under the edge, and yes, it is rotted out. sorry bout that

spencra · 12-31-2003, 05:12 PM

Thats cool, At least you're honest. Thanks alot for answering all of my posts though. Much appreciated, Larry.

zyggy72 · 12-31-2003, 05:13 PM

Larry, I may have a good 67/68 hood up my way but I will have to check and see.

my68beatertruck · 12-31-2003, 05:47 PM

duh, i forgot to post the pic of the fender trim, here you go zyggy

my68beatertruck · 12-31-2003, 05:48 PM

like i said, it's pretty beat up

peppi · 12-31-2003, 05:53 PM

How much for hood? I am about 1 hour from jackson.

my68beatertruck · 12-31-2003, 05:57 PM

the hood is bad, a small dent in the front, and rot behind the front trim piece, sorry

peppi · 12-31-2003, 06:02 PM

Ok thanks. I am also looking for power brake parts. Does the truck have power brakes? I see you have power booster. rotors,calipers,hoses,etc...?

my68beatertruck · 12-31-2003, 06:15 PM

no other brake parts except the manual drums on the truck, the booster/master cylinder is off a 72 1/2 ton with disks. where in jersey are you?

peppi · 12-31-2003, 06:45 PM

Tuckerton near LBI.

zyggy72 · 01-01-2004, 09:11 AM

TTT

olblue60@aol.com · 01-01-2004, 11:26 PM

hi
Im wondering about the grille? has anyone asked about it yet? Dont need the trim,just a good solid grille. Will you throw it on a greyhound or ship to Maryland 20901? how much shipped? Thanks
John

whitesswj · 01-04-2004, 02:55 AM

How much for the grill emblem, Hood letters, and passenger headlight bezel, hood hinges, seat belts, Cluster w/ choke cable?
Most important, seatbelts, hinges and choke cable. I live in Springfield MO 65803

LGCC10 · 01-04-2004, 01:34 PM

Looking for 5 bolt rear with coils

GloryHound · 01-04-2004, 02:52 PM

How good is the bed? Particularly the passenger side and inner side panels? and how much?

my68beatertruck · 01-04-2004, 05:28 PM

ok, sold the truck whole, thanks for lookin though!!

whitesswj · 01-04-2004, 08:37 PM

sweet! hope you got a good deal!

12-31-2003, 04:53 PM	#26
my68beatertruck GOT JACK??? Join Date: Aug 2003 Location: New Jersey Posts: 122	bottom of hood Attached Images __________________ 68 C-10 250", 200R-4, LWB 04 F350 dually V-10, 6-spd 72 Cadillac Coupe DeVille

12-31-2003, 04:54 PM	#27
my68beatertruck GOT JACK??? Join Date: Aug 2003 Location: New Jersey Posts: 122	another bottom Attached Images __________________ 68 C-10 250", 200R-4, LWB 04 F350 dually V-10, 6-spd 72 Cadillac Coupe DeVille

12-31-2003, 04:58 PM	#28
my68beatertruck GOT JACK??? Join Date: Aug 2003 Location: New Jersey Posts: 122	zyggy, here's a pic of the drivers side fender front molding, it's pretty beat up. pm me if you're still interested. thanks __________________ 68 C-10 250", 200R-4, LWB 04 F350 dually V-10, 6-spd 72 Cadillac Coupe DeVille

12-31-2003, 05:04 PM	#30
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	Are you sure that the dent on the front between the e and the t isn't just on the trim? And I hate to be a pain in the butt, but if you could yank that trim off the front of the hood so I could get a peek I would appreciate it. That is really the only part of the hood that I am worried about. Like I said I have alot of rust damage on my hood in that area and it isn't fun trying to patch it up. Thanks again. __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)

12-31-2003, 05:09 PM	#32
my68beatertruck GOT JACK??? Join Date: Aug 2003 Location: New Jersey Posts: 122	sorry larry, i just got a good look under the edge, and yes, it is rotted out. sorry bout that __________________ 68 C-10 250", 200R-4, LWB 04 F350 dually V-10, 6-spd 72 Cadillac Coupe DeVille

12-31-2003, 05:02 PM	#29
zyggy72 Can't kick the addiction! Join Date: Jan 2002 Location: Riverton, CT 06065 Posts: 402	I'm up in the New York / Mass. corner of CT. I'll take the two grill pieces of trim, the hood trim, and the passenger front fender tip trim. How much do you want for them? For shipping, I could make it a day trim to come down and pick the trim up.

12-31-2003, 05:08 PM	#31
zyggy72 Can't kick the addiction! Join Date: Jan 2002 Location: Riverton, CT 06065 Posts: 402	Spencra, if there is a dent in the hood between the E & T, you could tap it out some through one of the holes in the underside and then fill and smooth the rest.

12-31-2003, 05:12 PM	#33
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	Thats cool, At least you're honest. Thanks alot for answering all of my posts though. Much appreciated, Larry. __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)

12-31-2003, 05:13 PM	#34
zyggy72 Can't kick the addiction! Join Date: Jan 2002 Location: Riverton, CT 06065 Posts: 402	Larry, I may have a good 67/68 hood up my way but I will have to check and see.

12-31-2003, 05:47 PM	#35
my68beatertruck GOT JACK??? Join Date: Aug 2003 Location: New Jersey Posts: 122	duh, i forgot to post the pic of the fender trim, here you go zyggy Attached Images __________________ 68 C-10 250", 200R-4, LWB 04 F350 dually V-10, 6-spd 72 Cadillac Coupe DeVille

12-31-2003, 05:48 PM	#36
my68beatertruck GOT JACK??? Join Date: Aug 2003 Location: New Jersey Posts: 122	like i said, it's pretty beat up __________________ 68 C-10 250", 200R-4, LWB 04 F350 dually V-10, 6-spd 72 Cadillac Coupe DeVille

12-31-2003, 05:53 PM	#37
peppi Registered User Join Date: Jul 2003 Location: JERSEY Posts: 57	How much for hood? I am about 1 hour from jackson. __________________ 1968 C-10 Money PIT......

12-31-2003, 05:57 PM	#38
my68beatertruck GOT JACK??? Join Date: Aug 2003 Location: New Jersey Posts: 122	the hood is bad, a small dent in the front, and rot behind the front trim piece, sorry __________________ 68 C-10 250", 200R-4, LWB 04 F350 dually V-10, 6-spd 72 Cadillac Coupe DeVille

12-31-2003, 06:02 PM	#39
peppi Registered User Join Date: Jul 2003 Location: JERSEY Posts: 57	Ok thanks. I am also looking for power brake parts. Does the truck have power brakes? I see you have power booster. rotors,calipers,hoses,etc...? __________________ 1968 C-10 Money PIT......

12-31-2003, 06:15 PM	#40
my68beatertruck GOT JACK??? Join Date: Aug 2003 Location: New Jersey Posts: 122	no other brake parts except the manual drums on the truck, the booster/master cylinder is off a 72 1/2 ton with disks. where in jersey are you? __________________ 68 C-10 250", 200R-4, LWB 04 F350 dually V-10, 6-spd 72 Cadillac Coupe DeVille



Register or Log In To remove these advertisements.

12-31-2003, 06:45 PM	#41
peppi Registered User Join Date: Jul 2003 Location: JERSEY Posts: 57	Tuckerton near LBI. __________________ 1968 C-10 Money PIT......

01-01-2004, 09:11 AM	#42
zyggy72 Can't kick the addiction! Join Date: Jan 2002 Location: Riverton, CT 06065 Posts: 402	TTT

01-01-2004, 11:26 PM	#43
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	grille hi Im wondering about the grille? has anyone asked about it yet? Dont need the trim,just a good solid grille. Will you throw it on a greyhound or ship to Maryland 20901? how much shipped? Thanks John __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

01-04-2004, 02:55 AM	#44
whitesswj Embrace the Redneck Join Date: Jan 2004 Location: Cabot, AR Posts: 1,334	How much for the grill emblem, Hood letters, and passenger headlight bezel, hood hinges, seat belts, Cluster w/ choke cable? Most important, seatbelts, hinges and choke cable. I live in Springfield MO 65803 __________________ '01 Camaro *Son, you just can't get there from here...*

01-04-2004, 01:34 PM	#45
LGCC10 Junior Member Join Date: Feb 2003 Location: L.I.,NY Posts: 49	Looking for 5 bolt rear with coils

01-04-2004, 02:52 PM	#46
GloryHound Working on a Nova. Join Date: Nov 2002 Location: ## Posts: 506	How good is the bed? Particularly the passenger side and inner side panels? and how much?

01-04-2004, 05:28 PM	#47
my68beatertruck GOT JACK??? Join Date: Aug 2003 Location: New Jersey Posts: 122	ok, sold the truck whole, thanks for lookin though!! __________________ 68 C-10 250", 200R-4, LWB 04 F350 dually V-10, 6-spd 72 Cadillac Coupe DeVille

01-04-2004, 08:37 PM	#48
whitesswj Embrace the Redneck Join Date: Jan 2004 Location: Cabot, AR Posts: 1,334	sweet! hope you got a good deal! __________________ '01 Camaro *Son, you just can't get there from here...*

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.