Patina love

[oneshotkyle]

Picked up some of these from Napa this a.m. so I can redo all the engine compartment wiring when I install HEI. 2 bucks a pop what the heck haha

[oneshotkyle]

So I come home after a hard days work ready to take the dogs for a ride in “TETNUS”. And upon opening garage door I found this

So I had to heat drums up with torch as they were siezed on axle flange. And then I race on down to O’Reilly to get parts. I bought new drum, pads, wheel cylinders, spring kits, adjusters, axle seals and axle bearing. All of which will be here tomorrow. When I get home I finish disassemble both sides and find the e brake cables broke. So I call orielly up and although they didn’t have them he gave me ac delco number 18p2299. Hope it’s right cause I got a pair coming second day from rock auto. What a mess. Lmao

[lil hoodlum]

Are you not running a rear coil spring?

[oneshotkyle]

Originally Posted by lil hoodlum

Are you not running a rear coil spring?

Yes I am

[oneshotkyle]

Got the clutch fan installed

Got three on the 🌲 bushings in

HEI showed up

Got a pile of brake parts to completely go through rear end
Then I bought a sand blast cabinet to clean small parts

[Richard]

I do not get the "patina love" thing. Two reasons to leave the body on my truck as it was in my build. I do not have the money to spend (understand that) or I have more dollars than cents (sense). I saved a lot of years to do my truck as I wanted. I will love it with the new paint. The original faded and rusted exterior would be a compromise to me. No matter what I did to fix it up it would still be an old rusty truck. Can the old rusty truck still be enjoyed, yes.

[oneshotkyle]

Originally Posted by Richard

I do not get the "patina love" thing. Two reasons to leave the body on my truck as it was in my build. I do not have the money to spend (understand that) or I have more dollars than cents (sense). I saved a lot of years to do my truck as I wanted. I will love it with the new paint. The original faded and rusted exterior would be a compromise to me. No matter what I did to fix it up it would still be an old rusty truck. Can the old rusty truck still be enjoyed, yes.

What’s not to love about a truck with original body panels and unmolested pretty much everywhere. Just the thought of all the history these trucks went through and survived is truly amazing. I would definitely love a tricked out freshly painted truck also but will take my time enjoying all the simple features of the era, while my brand new 90k truck sits in the driveway

[oneshotkyle]

Got some spare time today, pulled the axles and although the bearing look great the axle surface was pitted. So I got a new pair of 6 lug axles with bearing, seals and lugs on the way


Then I pulled rear end , degreased and pressure washed. Then went to town with wire wheel. Already have everything new so getting it painted and re installed. Axles hopefully Friday.

[oneshotkyle]

Also on my list of things to do. I need some help identifying my air cleaner. Is it oem? The lid is rotten where wing nut goes on top. So I’d like to find a complete setup for a 1 barrel that is era correct. Any help appreciated

[raggedjim]

Well, I do love the patina look. I like car shows but I LOVE junkyards and when I see a patina truck I'm happy someone loves it enough to keep it on the road. I'd rather see patina than billet and tweed.

Nice work, Rg

[Richard]

Originally Posted by oneshotkyle

What’s not to love about a truck with original body panels and unmolested pretty much everywhere. Just the thought of all the history these trucks went through and survived is truly amazing. I would definitely love a tricked out freshly painted truck also but will take my time enjoying all the simple features of the era, while my brand new 90k truck sits in the driveway

To add more context to my post. Love and like are two really different things to me. I liked my first 72 truck and my current truck a lot the way they were. Will "LOVE" my current 72 when I finish it. Love is a word I use carefully. Dishing out love to people and things that need it is another thing. Understand that.

[oneshotkyle]

Building brake lines and assembling rear brakes at this point. Weather sucks here and painting parts is a total pain in the a$$…. Axles should arrive today, hopefully. And I got a package last night with a radio delete plate I had bought from a member. Here’s the before and after


Late night picks I know but it helps clean up the dash and appearance so much it’s hard to explain

[oneshotkyle]

More progress today

[oneshotkyle]

Been a day or two assembling drum brakes. I don’t have holes to adjust in backing plate so I’m gonna drill the face of the drums

[Jason Banks]

You're going to have a nicely sorted out truck when done!

I'll look at my air cleaner stash and see if I have one I could part with...

[oneshotkyle]

Originally Posted by Jason Banks

You're going to have a nicely sorted out truck when done!

I'll look at my air cleaner stash and see if I have one I could part with...

Thank you…..

[dmb]

your pics are huge may want to resize them before posting

[oneshotkyle]

Originally Posted by dmb

your pics are huge may want to resize them before posting

I’ve been told that once before. lol. I go to advanced and just click pic icon and paste http/…. How do I change the size

[oneshotkyle]

Been having a full throttle stumble since I bought this truck a month ago. I flushed tank, installed eBay electric choke 1 barrel, installed new fuel pump, installed HEI along with the firewall to distributor rewire. Always starts like a champ runs smooth throughout throttle except for full throttle. Yesterday while getting parts at orielly it wouldn’t even click to start. So I used there battery jumper and got home to check. Low and behold the 3 wire alternator to a crap. So this a.m. I decided to install a 1 wire setup. Mostly for being simplistic and less wiring. So I bought a 61amp 1 wire, and ran new 10 gauge wire from alternator to starter post as I like to no clutter up battery. Thing runs the best it has ever ran. Wish I would have caught this early on.

[oneshotkyle]

Testing for smaller photos

[oneshotkyle]

Getting some three on the 🌲 action in today.

[weq92f]

.

You got it figured out now! Here's the difference illustrated (chrome browser zoomed out to 25% of normal size):

-klb

[oneshotkyle]

Originally Posted by weq92f

.

You got it figured out now! Here's the difference illustrated (chrome browser zoomed out to 25% of normal size):

-klb

Thanks. I’m a slow learner sometimes. Why does it rotate my pics?

[oneshotkyle]

On another note I got heater core/ heater hoses/radiator hoses, all new clamps, water pump, 195 thermostat, thermostat housing gaskets. Radiator going in tomorrow to get the rod out treatment hope it’s all good. Then reinstall and on to the next thing. lol. Everything I touch gets the full treatment of degrease, scrape, sand, wire wheel, primer and paint. Planning the Chevy orange treatment on the engine too

[Beecee336]

Originally Posted by oneshotkyle

Also on my list of things to do. I need some help identifying my air cleaner. Is it oem? The lid is rotten where wing nut goes on top. So I’d like to find a complete setup for a 1 barrel that is era correct. Any help appreciated

I have an OEM 2 barrel air cleaner in good shape. I'm not sure if it will fit the single barrel though?