Greg65 build thread - Page 20 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

greg65 · 04-13-2013, 06:27 PM

Finally dropped off the floor vents and a few more pieces off at the powder coaters today. Sould have everything back next Friday. I will post pictures of the finished product.
Posted via Mobile Device

Snowbound · 04-18-2013, 09:07 PM

Greg, without going through your whole thread, what hoses did you use with the serpentine set up? I'm thinking the stock lower will still work, but the upper might be an issue.

Thanks,
Brian
Posted via Mobile Device

greg65 · 04-18-2013, 09:39 PM

Quote:

Originally Posted by Snowbound

Greg, without going through your whole thread, what hoses did you use with the serpentine set up? I'm thinking the stock lower will still work, but the upper might be an issue.

Thanks,
Brian
Posted via Mobile Device

I have not got to that point yet. Still undecided on which radiator to go with. I wish I could be more help. I'm sure if you start a new thred about this someone can steer you in the right direction.
Posted via Mobile Device

greg65 · 04-20-2013, 09:47 PM

I dropped these parts off at a local powder coater last and they delivered them back to me today. The parts turned out real good. This afternoon I installed new vent gaskets and then reassembles them. One of them needs a tweeking but still turned out pretty good.

sdailey · 04-20-2013, 09:52 PM

Nice!!

Alan's Classic · 04-20-2013, 09:52 PM

Very nice Greg!! I didn't get much done today. I was out driving the truck for the first time this year.

greg65 · 04-20-2013, 09:53 PM

Still not sure if I like these or not. I was thinking they would go with the stainless tailgate chains and pivot bolts. I will decide when everything gets mounted together. If not I have another set that can be painted body color. It's always nice having extra parts.

greg65 · 04-20-2013, 09:54 PM

Quote:

Originally Posted by sdailey

Nice!!

thanks Shannon.

greg65 · 04-20-2013, 09:58 PM

Quote:

Originally Posted by Alan's Classic

Very nice Greg!! I didn't get much done today. I was out driving the truck for the first time this year.

I don't blame you. When mine hits the road again, I plan on driving it as much as I can.

Alan's Classic · 04-21-2013, 07:05 PM

The top of the roof is ready for slick sand. The back of the cab is getting close. Once it gets back on the stand I'll work the cab corners and finish the rockers out. The bottom of the roof flange still needs work.

Modges'66 · 04-21-2013, 08:11 PM

Nice craftmanship....Awesome attention to detail!

greg65 · 04-22-2013, 09:43 PM

Amazing work as always Alan. I know it's a ways off but looking forward to the paint being applied.
Posted via Mobile Device

flips72 · 04-24-2013, 07:02 PM

vents look great greg, and so does the cab alan, cant wait to see it in primer,and slick sand is some awesome stuff, hard to spray but easy to work.

greg65 · 04-24-2013, 11:10 PM

Quote:

Originally Posted by flips72

vents look great greg, and so does the cab alan, cant wait to see it in primer,and slick sand is some awesome stuff, hard to spray but easy to work.

Thank Jeff
Posted via Mobile Device

Alan's Classic · 04-27-2013, 10:19 PM

Quote:

Originally Posted by Modges'66

Nice craftmanship....Awesome attention to detail!

Quote:

Originally Posted by greg65

Amazing work as always Alan. I know it's a ways off but looking forward to the paint being applied.
Posted via Mobile Device

Me too.

Quote:

Originally Posted by flips72

vents look great greg, and so does the cab alan, cant wait to see it in primer,and slick sand is some awesome stuff, hard to spray but easy to work.

Thanks Jeff.

How many have A.D.D. when your working on your truck. I suffer from it. I starting laughing today. I started to work on one thing and as I was working my way around the cab I found a few other things that needed done and ended up working on them. Squirrel

Here are a few pics from today.

I used an awl to find good metal then cut it out. Then I cleaned all the loose rust away, treated the remaining rust and cut the patch out of the new panel. The inside of the door was in really nice shape.

Alan's Classic · 04-27-2013, 10:24 PM

a few more. I normally don't cut my new panels long, but I saw this one will need some massaging to get it right. Glad I did. My first fit was almost perfect.

likaroc13 · 04-27-2013, 11:18 PM

Nice work on the patch. My passenger door needs a little attention in that same area.
Posted via Mobile Device

Dinos63 · 04-28-2013, 01:21 AM

man thats nice work!!

Alan's Classic · 04-28-2013, 07:43 PM

Quote:

Originally Posted by likaroc13

Nice work on the patch. My passenger door needs a little attention in that same area.
Posted via Mobile Device

Quote:

Originally Posted by Dinos63

man thats nice work!!

Thanks Guys!!

A series of pics while I was welding the patches.

greg65 · 04-28-2013, 08:14 PM

Cool. No more speaker holes.
Posted via Mobile Device

Alan's Classic · 04-28-2013, 08:16 PM

Quote:

Originally Posted by greg65

Cool. No more speaker holes.
Posted via Mobile Device

At least in one door.

Ta2Don · 04-28-2013, 09:13 PM

Very Nice Repair... Great work as always!!!

sdailey · 04-29-2013, 08:59 AM

Nice work as always.

Bomp · 04-29-2013, 10:40 AM

Like it!

da_bears_da1 · 04-29-2013, 03:16 PM

Very nice patches and work! Did you use a repop patch or donor or form all of that?
Posted via Mobile Device

04-13-2013, 06:27 PM	#476
greg65 Registered User Join Date: Mar 2009 Location: Daphne, Al Posts: 1,120	Re: Greg65 build thread Finally dropped off the floor vents and a few more pieces off at the powder coaters today. Sould have everything back next Friday. I will post pictures of the finished product. Posted via Mobile Device __________________ 1965 c-10 swb 1997 c-1500 extended cab 2004 tahoe 1993 mustang gt BUILD THREAD:http://67-72chevytrucks.com/vboard/s...d.php?t=336653

04-18-2013, 09:07 PM	#477
Snowbound Registered User Join Date: Aug 2002 Location: Westbank, BC Posts: 403	Re: Greg65 build thread Greg, without going through your whole thread, what hoses did you use with the serpentine set up? I'm thinking the stock lower will still work, but the upper might be an issue. Thanks, Brian Posted via Mobile Device __________________ 1965 Chevy Short Box Stepside, 230 - 3 speed, 4:11 gears, original paint rust free survivor. Now sporting a 383 SBC and TKO-600

04-20-2013, 09:47 PM	#479
greg65 Registered User Join Date: Mar 2009 Location: Daphne, Al Posts: 1,120	Re: Greg65 build thread I dropped these parts off at a local powder coater last and they delivered them back to me today. The parts turned out real good. This afternoon I installed new vent gaskets and then reassembles them. One of them needs a tweeking but still turned out pretty good. Attached Images __________________ 1965 c-10 swb 1997 c-1500 extended cab 2004 tahoe 1993 mustang gt BUILD THREAD:http://67-72chevytrucks.com/vboard/s...d.php?t=336653

04-20-2013, 09:52 PM	#480
sdailey The Few, The Proud Join Date: Jun 2007 Location: Ball Ground, Georgia Posts: 1,830	Re: Greg65 build thread Nice!! __________________ Shannon

04-20-2013, 09:52 PM	#481
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: Greg65 build thread Very nice Greg!! I didn't get much done today. I was out driving the truck for the first time this year. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

04-20-2013, 09:53 PM	#482
greg65 Registered User Join Date: Mar 2009 Location: Daphne, Al Posts: 1,120	Re: Greg65 build thread Still not sure if I like these or not. I was thinking they would go with the stainless tailgate chains and pivot bolts. I will decide when everything gets mounted together. If not I have another set that can be painted body color. It's always nice having extra parts. Attached Images __________________ 1965 c-10 swb 1997 c-1500 extended cab 2004 tahoe 1993 mustang gt BUILD THREAD:http://67-72chevytrucks.com/vboard/s...d.php?t=336653

04-21-2013, 07:05 PM	#485
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: Greg65 build thread The top of the roof is ready for slick sand. The back of the cab is getting close. Once it gets back on the stand I'll work the cab corners and finish the rockers out. The bottom of the roof flange still needs work. Attached Images __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

04-21-2013, 08:11 PM	#486
Modges'66 Registered User Join Date: Feb 2012 Location: Grand Rapids, Michigan, otherwise known as Beer City U.S.A. Posts: 1,081	Re: Greg65 build thread Nice craftmanship....Awesome attention to detail! __________________ My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=512904

04-22-2013, 09:43 PM	#487
greg65 Registered User Join Date: Mar 2009 Location: Daphne, Al Posts: 1,120	Re: Greg65 build thread Amazing work as always Alan. I know it's a ways off but looking forward to the paint being applied. Posted via Mobile Device __________________ 1965 c-10 swb 1997 c-1500 extended cab 2004 tahoe 1993 mustang gt BUILD THREAD:http://67-72chevytrucks.com/vboard/s...d.php?t=336653

04-24-2013, 07:02 PM	#488
flips72 Registered User Join Date: Jan 2008 Location: oldfort tn Posts: 1,183	Re: Greg65 build thread vents look great greg, and so does the cab alan, cant wait to see it in primer,and slick sand is some awesome stuff, hard to spray but easy to work. __________________ my 65 fleetside build http://67-72chevytrucks.com/vboard/s...d.php?t=442370 big back glass conversion http://67-72chevytrucks.com/vboard/s...dow+conversion

04-27-2013, 10:24 PM	#491
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: Greg65 build thread a few more. I normally don't cut my new panels long, but I saw this one will need some massaging to get it right. Glad I did. My first fit was almost perfect. Attached Images __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

04-27-2013, 11:18 PM	#492
likaroc13 Rollin' Old Skool Join Date: Jun 2007 Location: Hattiesburg, MS Posts: 5,371	Re: Greg65 build thread Nice work on the patch. My passenger door needs a little attention in that same area. Posted via Mobile Device __________________ _____________________________________________ Phillip My Build threads: 1966 Chevy C-10 "Black Betty" shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction) http://67-72chevytrucks.com/vboard/s...ighlight=betty 1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver) http://67-72chevytrucks.com/vboard/s...d.php?t=601142 Pics: '66 C-10 https://flic.kr/s/aHsjHWD4h9 '97 Tahoe https://flic.kr/s/aHsjGZ7wKP '93 C-1500 https://flic.kr/s/aHskxdpdnQ '88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md Previous Rides: 1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold) 1993 Chevy C-1500 short/step Retro-Rod (Sold) 1988 S-10 Blazer 2dr/2wd mild custom (Sold)

04-28-2013, 01:21 AM	#493
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: Greg65 build thread man thats nice work!! __________________ CHEVY ONLY... Nothin Else !

04-28-2013, 08:14 PM	#495
greg65 Registered User Join Date: Mar 2009 Location: Daphne, Al Posts: 1,120	Re: Greg65 build thread Cool. No more speaker holes. Posted via Mobile Device __________________ 1965 c-10 swb 1997 c-1500 extended cab 2004 tahoe 1993 mustang gt BUILD THREAD:http://67-72chevytrucks.com/vboard/s...d.php?t=336653

04-28-2013, 09:13 PM	#497
Ta2Don Registered User Join Date: Apr 2012 Location: Searcy, AR Posts: 4,203	Re: Greg65 build thread Very Nice Repair... Great work as always!!! __________________ DON Proverbs 27:17 US Air Force Retarded errr Retired My '65 Stepper Build:http://67-72chevytrucks.com/vboard/s...d.php?t=533920 My '60 Rusty Patina Build:http://67-72chevytrucks.com/vboard/s...66#post7402266 My '72 http://67-72chevytrucks.com/vboard/s...59#post7204359 SOLD



Register or Log In To remove these advertisements.

04-29-2013, 08:59 AM	#498
sdailey The Few, The Proud Join Date: Jun 2007 Location: Ball Ground, Georgia Posts: 1,830	Re: Greg65 build thread Nice work as always. __________________ Shannon

04-29-2013, 10:40 AM	#499
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: Greg65 build thread Like it!

04-29-2013, 03:16 PM	#500
da_bears_da1 Registered User Join Date: Feb 2013 Location: Genoa, IL Posts: 387	Re: Greg65 build thread Very nice patches and work! Did you use a repop patch or donor or form all of that? Posted via Mobile Device __________________ Jeff *Simplify Life!* My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=566533

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.