Project Platinum C10

[68Timber]

Originally Posted by Claytona08

I've just always loved the factory trim that came on these trucks. That's the main reason I put the side molding, factory grille, vent windows and factory style bumpers back on. The truck came with the small sport mirrors but I like the look of the big mirrors instead although I do like the look of the truck without mirrors. I plan on driving this truck a couple times a month when the weather is perfect and the weather doesn't show any chance of rain over the whole state of Texas, Thanks for the compliments on the paint.

10 4. I like the factory trim too, and although I prefer the look of the little sport mirrors, they're about useless on the road.

[SeTx67]

If you get bored tomorrow swing by in the truck. I'd love to check it out. I promise not to have any back breaking projects I need help with . I did get a little done on the truck today

[Sodell]

I used a kit from LMC for the seat. Are you staying with the bench, stock? I kinda wish I had used a vinyl instead of the factory style for the Silverado. My wife loves the material, but me, not so much.

[Claytona08]

Originally Posted by SeTx67

If you get bored tomorrow swing by in the truck. I'd love to check it out. I promise not to have any back breaking projects I need help with . I did get a little done on the truck today

Hey man I'll try and make it by before you go back to work. When do you go back?

Originally Posted by Sodell

I used a kit from LMC for the seat. Are you staying with the bench, stock? I kinda wish I had used a vinyl instead of the factory style for the Silverado. My wife loves the material, but me, not so much.

I'm actually going to get custom interior done from a forum member crsweet91. I think I'm gonna do vinyl/cloth on my seat. Planning on having my panels and dash wrapped also. Check out his work. http://s1259.photobucket.com/user/SweetFabCo/profile/

[rs74]

Connor looks like he does pretty good work. I have inquired myself about doing some work on mine when the time comes.

http://www.sweetfabricationco.com/re...dash-pads.html

http://67-72chevytrucks.com/vboard/s...=graphite+8945

[Claytona08]

Originally Posted by rs74

Connor looks like he does pretty good work. I have inquired myself about doing some work on mine when the time comes.

http://www.sweetfabricationco.com/re...dash-pads.html

http://67-72chevytrucks.com/vboard/s...=graphite+8945

Yeah his work looks awesome!

[SeTx67]

Originally Posted by Claytona08

Hey man I'll try and make it by before you go back to work. When do you go back?

Sounds good. I go back early Friday morning

[Sodell]

Continue with the Platinum theme?

[IMG][/IMG]

[Claytona08]

Originally Posted by Sodell

Continue with the Platinum theme?

[IMG][/IMG]

Ohhhh that looks good and expensive! lol

[SeTx67]

That does look nice. Got the truck back together for now . Swing by and check it out if you'd like

[Claytona08]

Originally Posted by SeTx67

That does look nice. Got the truck back together for now . Swing by and check it out if you'd like

Man I've been busy and hadn't had time to get by there. Just dropped off my truck at the paint shop to be wet sanded and buffed. Hopefully it doesn't take 3 months to get back.....lol

[SeTx67]

No worries. I just got back to work this morning and may pull a 50 day trip this time. So hopefully you'll have your truck back by then. I'll be hopefully ripping my apart next time I'm home and pulling your motor out...

[Claytona08]

Originally Posted by SeTx67

No worries. I just got back to work this morning and may pull a 50 day trip this time. So hopefully you'll have your truck back by then. I'll be hopefully ripping my apart next time I'm home and pulling your motor out...

Haha hopefully I'll have it back by then....hopefully

[rs74]

Originally Posted by Claytona08

Haha hopefully I'll have it back by then....hopefully

Yeah but you know how that goes. Lol.

[Claytona08]

Originally Posted by rs74

Yeah but you know how that goes. Lol.

Yeah I do, lol Or should I say we do?

[Claytona08]

Getting my dash ready for upholstery. Luckily I had a buddy that knew what he was doing and also using his air tools helped! lol

[Claytona08]

I think I'm having my bench seat stitched liked this.

[Claytona08]

Alright I scraped the idea of stitching on the above post and sketched my own idea up in MS Paint.

[tintbox]

Just went through the whole build. Nice truck!

[Claytona08]

Originally Posted by tintbox

Just went through the whole build. Nice truck!

Thanks man. There are a lot of useless pages just talking about other stuff lol.

[Claytona08]

Here's my dash. More to come soon!

[rs74]

Just thought I would share this. I had saved the pic of the setup behind the seat as I might want to try and do this to mine. The interior looks like it is done in the two tone as well. Its looks good but I really like the sub setup. I love the truck though. Those gray trucks always get my attention. Anyways here it is.

http://www.layitlow.com/forums/15-ve...ado-truck.html

[Claytona08]

Originally Posted by rs74

Just thought I would share this. I had saved the pic of the setup behind the seat as I might want to try and do this to mine. The interior looks like it is done in the two tone as well. Its looks good but I really like the sub setup. I love the truck though. Those gray trucks always get my attention. Anyways here it is.

http://www.layitlow.com/forums/15-ve...ado-truck.html

Nice truck...I've been thinking about eventually adding a nice system to my truck. I've thought about trying to build a cool looking fiberglass box. I might try that first and if I can't succeed at that I'll resort back to this setup. Thanks for sharing Roy.

[Claytona08]

Here are my door panels. The gray looks like it's blue in some pics but I think it might have been the flash causing this. Not sure. I'll try and get better pics soon.

[SeTx67]

You had Jodeez do the interior work for you? Looks really nice! After the motor swap I'm taking my seat to him. He always has nice cars up there