my 68 shortbed build - Page 21 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SweetandLong68 · 03-29-2012, 02:05 PM

Quote:

Originally Posted by cstm68

Today I picked up my driveline I had cut to size, I needed a new one with a slip shaft since I kept braking carrier bearing mounts after bagging the truck
Posted via Mobile Device
Posted via Mobile Device
Posted via Mobile Device

Why not just go with a one piece driveshaft?

BTW Truck looks great. You have done tons of great work!

lata
CHRIS

fastcam1 · 05-04-2012, 12:17 AM

Any more progress on the inner fenders?
Posted via Mobile Device

cstm68 · 05-04-2012, 12:29 AM

sweetandlong68- i stuck with a 2 piece due to the fact that the truck is bagged and i need the slip shaft to adj from aird up, ride hight and aired out. with a one peice i would be putting to much stress on my u-joints.

fastcam1- no progress yet, just now getting the truck out of the garage ware its been all winter, should be getting back on them soon!

fastcam1 · 05-04-2012, 12:38 AM

[QUOTE=cstm68;5352125]sweetandlong68- i stuck with a 2 piece due to the fact that the truck is bagged and i need the slip shaft to adj from aird up, ride hight and aired out. with a one peice i would be putting to much stress on my u-joints.

fastcam1- no progress yet, just now getting the truck out of the garage ware its been all winter, should be getting back on them soon![/QUOT

Right on! Where did you pick up the trailer fender, I like the idea
Posted via Mobile Device

cstm68 · 05-04-2012, 12:48 AM

locan trailer supply store, six robblees just north of you in tacoma should have them too

fastcam1 · 05-04-2012, 01:01 AM

Thanks I actually work in Tacoma I'll have to check them out
Posted via Mobile Device

cstm68 · 06-28-2012, 10:38 PM

added 4'' to my rear tubs""

fastcam1 · 06-29-2012, 12:45 AM

Quote:

Originally Posted by cstm68

added 4'' to my rear tubs""

I like it!
Posted via Mobile Device

EZ SPEED · 08-05-2012, 02:57 PM

Awesome Build

99-LS1-SS · 08-27-2012, 12:06 PM

Very nice build! You have got some very creative ideas.

cstm68 · 11-07-2012, 12:41 AM

Got a little work done on my inner fenders. Decided to just build them onto the fender As one piece.
Posted via Mobile Device
Posted via Mobile Device
Posted via Mobile Device

cstm68 · 11-07-2012, 12:43 AM

Posted via Mobile Device
Posted via Mobile Device

fastcam1 · 11-07-2012, 01:14 AM

Looking good!! Can you get a pic of how much lower it will sit when aired out?
Posted via Mobile Device

72 SHORTBED 7.0 · 11-07-2012, 09:35 AM

Nice nice I'm keeping my eye on this one....
Posted via Mobile Device

**67cheby** · 11-07-2012, 11:03 AM

looking great man !

cstm68 · 11-07-2012, 10:46 PM

Thank!!! I'll try to get some better pics too.
Fastcam1. What do you want to see aired out?? The inner fender?
Posted via Mobile Device

fastcam1 · 11-07-2012, 11:25 PM

The inner fender and also of the truck. I know it should go a few inches lower with the fenders cut.
Are you on Facebook? If you are you should check out the Northwest c10's page.
Posted via Mobile Device

cstm68 · 11-08-2012, 12:14 AM

here are some more pics. i wasnt running any innerfenders before so the truck doesnt sit any lower now than when it was first bagged, i built the fenders up a little more than i needed to so that i would have room once i run a dropmember,
here are pics of it aired out, i also love the way it cleans up ware the hinge was.
yes im on facebook, i belive i am a member of Northwest c10's !!

fastcam1 · 11-08-2012, 01:35 AM

Right on!!! Ill have to take a closer look at the truck at good guys or some meets next year. You finish the rear tubs?
Posted via Mobile Device

cstm68 · 01-10-2013, 09:30 PM

Updates on the inner fenders!! Just need some sanding and paint
Posted via Mobile Device
Posted via Mobile Device

fastcam1 · 01-11-2013, 01:01 AM

Keep the progress coming

Posted via Mobile Device

Bennett68C10 · 01-11-2013, 09:15 AM

Nice job on the fenders

hotrodchevy1999 · 01-12-2013, 12:42 AM

just check out you build thread nice work truck looks good

cstm68 · 01-14-2013, 08:55 PM

More progress on the inner fenders! Got them primed today. Just need to block them and stray some gloss black this weekend
Posted via Mobile Device
Posted via Mobile Device

cstm68 · 01-21-2013, 12:30 AM

Fenders are done!
Posted via Mobile Device
Posted via Mobile Device

05-04-2012, 12:17 AM	#502
fastcam1 Young gun Join Date: Feb 2009 Location: Spanaway WA Posts: 631	Re: my 68 shortbed build Any more progress on the inner fenders? Posted via Mobile Device __________________ 67 SWB Custom "JANE" http://67-72chevytrucks.com/vboard/s...d.php?t=554024 Northwest C10's http://www.facebook.com/#!/groups/Norhtwestc10s/ Cameron sparks

05-04-2012, 12:29 AM	#503
cstm68 Registered User Join Date: Jan 2007 Location: shoreline, wa Posts: 1,565	Re: my 68 shortbed build sweetandlong68- i stuck with a 2 piece due to the fact that the truck is bagged and i need the slip shaft to adj from aird up, ride hight and aired out. with a one peice i would be putting to much stress on my u-joints. fastcam1- no progress yet, just now getting the truck out of the garage ware its been all winter, should be getting back on them soon! __________________ 68 swb fleet bagged on 20's 327 with 4 speed http://67-72chevytrucks.com/vboard/s...d.php?t=223308 2014 Chevy 2500hd duramax CCLB

05-04-2012, 12:38 AM	#504
fastcam1 Young gun Join Date: Feb 2009 Location: Spanaway WA Posts: 631	Re: my 68 shortbed build [QUOTE=cstm68;5352125]sweetandlong68- i stuck with a 2 piece due to the fact that the truck is bagged and i need the slip shaft to adj from aird up, ride hight and aired out. with a one peice i would be putting to much stress on my u-joints. fastcam1- no progress yet, just now getting the truck out of the garage ware its been all winter, should be getting back on them soon![/QUOT Right on! Where did you pick up the trailer fender, I like the idea Posted via Mobile Device __________________ 67 SWB Custom "JANE" http://67-72chevytrucks.com/vboard/s...d.php?t=554024 Northwest C10's http://www.facebook.com/#!/groups/Norhtwestc10s/ Cameron sparks

05-04-2012, 12:48 AM	#505
cstm68 Registered User Join Date: Jan 2007 Location: shoreline, wa Posts: 1,565	Re: my 68 shortbed build locan trailer supply store, six robblees just north of you in tacoma should have them too __________________ 68 swb fleet bagged on 20's 327 with 4 speed http://67-72chevytrucks.com/vboard/s...d.php?t=223308 2014 Chevy 2500hd duramax CCLB

05-04-2012, 01:01 AM	#506
fastcam1 Young gun Join Date: Feb 2009 Location: Spanaway WA Posts: 631	Re: my 68 shortbed build Thanks I actually work in Tacoma I'll have to check them out Posted via Mobile Device __________________ 67 SWB Custom "JANE" http://67-72chevytrucks.com/vboard/s...d.php?t=554024 Northwest C10's http://www.facebook.com/#!/groups/Norhtwestc10s/ Cameron sparks

06-28-2012, 10:38 PM	#507
cstm68 Registered User Join Date: Jan 2007 Location: shoreline, wa Posts: 1,565	Re: my 68 shortbed build added 4'' to my rear tubs"" Attached Images __________________ 68 swb fleet bagged on 20's 327 with 4 speed http://67-72chevytrucks.com/vboard/s...d.php?t=223308 2014 Chevy 2500hd duramax CCLB

08-05-2012, 02:57 PM	#509
EZ SPEED Registered User Join Date: May 2009 Location: Anniston, Alabama Posts: 164	Re: my 68 shortbed build Awesome Build __________________ Eric 1967 C10 Small Window - LWB http://67-72chevytrucks.com/vboard/s...d.php?t=657509 2004 Silverado 2500HD - Turbo Diesel 603 rwhp / 1090 rwtq 2016 Camaro SS - Satin Pearl Nero wrap My 2010 Camaro SS Magazine feature (SOLD) http://www.superchevy.com/features/g...of-perfection/

08-27-2012, 12:06 PM	#510
99-LS1-SS Registered User Join Date: Mar 2011 Location: Oak Ridge NC Posts: 957	Re: my 68 shortbed build Very nice build! You have got some very creative ideas. __________________ My 1972 2WD Blazer build 1984 K10 beater truck

11-07-2012, 12:41 AM	#511
cstm68 Registered User Join Date: Jan 2007 Location: shoreline, wa Posts: 1,565	Re: my 68 shortbed build Got a little work done on my inner fenders. Decided to just build them onto the fender As one piece. Posted via Mobile Device Posted via Mobile Device Posted via Mobile Device __________________ 68 swb fleet bagged on 20's 327 with 4 speed http://67-72chevytrucks.com/vboard/s...d.php?t=223308 2014 Chevy 2500hd duramax CCLB

11-07-2012, 12:43 AM	#512
cstm68 Registered User Join Date: Jan 2007 Location: shoreline, wa Posts: 1,565	Re: my 68 shortbed build Posted via Mobile Device Posted via Mobile Device Attached Images __________________ 68 swb fleet bagged on 20's 327 with 4 speed http://67-72chevytrucks.com/vboard/s...d.php?t=223308 2014 Chevy 2500hd duramax CCLB

11-07-2012, 01:14 AM	#513
fastcam1 Young gun Join Date: Feb 2009 Location: Spanaway WA Posts: 631	Re: my 68 shortbed build Looking good!! Can you get a pic of how much lower it will sit when aired out? Posted via Mobile Device __________________ 67 SWB Custom "JANE" http://67-72chevytrucks.com/vboard/s...d.php?t=554024 Northwest C10's http://www.facebook.com/#!/groups/Norhtwestc10s/ Cameron sparks

11-07-2012, 09:35 AM	#514
72 SHORTBED 7.0 Registered User Join Date: Nov 2007 Location: dallas Tx in front of you Posts: 182	Re: my 68 shortbed build Nice nice I'm keeping my eye on this one.... Posted via Mobile Device

11-07-2012, 11:03 AM	#515
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: my 68 shortbed build looking great man ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-07-2012, 10:46 PM	#516
cstm68 Registered User Join Date: Jan 2007 Location: shoreline, wa Posts: 1,565	Re: my 68 shortbed build Thank!!! I'll try to get some better pics too. Fastcam1. What do you want to see aired out?? The inner fender? Posted via Mobile Device __________________ 68 swb fleet bagged on 20's 327 with 4 speed http://67-72chevytrucks.com/vboard/s...d.php?t=223308 2014 Chevy 2500hd duramax CCLB

11-07-2012, 11:25 PM	#517
fastcam1 Young gun Join Date: Feb 2009 Location: Spanaway WA Posts: 631	Re: my 68 shortbed build The inner fender and also of the truck. I know it should go a few inches lower with the fenders cut. Are you on Facebook? If you are you should check out the Northwest c10's page. Posted via Mobile Device __________________ 67 SWB Custom "JANE" http://67-72chevytrucks.com/vboard/s...d.php?t=554024 Northwest C10's http://www.facebook.com/#!/groups/Norhtwestc10s/ Cameron sparks



Register or Log In To remove these advertisements.

11-08-2012, 12:14 AM	#518
cstm68 Registered User Join Date: Jan 2007 Location: shoreline, wa Posts: 1,565	Re: my 68 shortbed build here are some more pics. i wasnt running any innerfenders before so the truck doesnt sit any lower now than when it was first bagged, i built the fenders up a little more than i needed to so that i would have room once i run a dropmember, here are pics of it aired out, i also love the way it cleans up ware the hinge was. yes im on facebook, i belive i am a member of Northwest c10's !! Attached Images __________________ 68 swb fleet bagged on 20's 327 with 4 speed http://67-72chevytrucks.com/vboard/s...d.php?t=223308 2014 Chevy 2500hd duramax CCLB

11-08-2012, 01:35 AM	#519
fastcam1 Young gun Join Date: Feb 2009 Location: Spanaway WA Posts: 631	Re: my 68 shortbed build Right on!!! Ill have to take a closer look at the truck at good guys or some meets next year. You finish the rear tubs? Posted via Mobile Device __________________ 67 SWB Custom "JANE" http://67-72chevytrucks.com/vboard/s...d.php?t=554024 Northwest C10's http://www.facebook.com/#!/groups/Norhtwestc10s/ Cameron sparks

01-10-2013, 09:30 PM	#520
cstm68 Registered User Join Date: Jan 2007 Location: shoreline, wa Posts: 1,565	Re: my 68 shortbed build Updates on the inner fenders!! Just need some sanding and paint Posted via Mobile Device Posted via Mobile Device Attached Images __________________ 68 swb fleet bagged on 20's 327 with 4 speed http://67-72chevytrucks.com/vboard/s...d.php?t=223308 2014 Chevy 2500hd duramax CCLB

01-11-2013, 01:01 AM	#521
fastcam1 Young gun Join Date: Feb 2009 Location: Spanaway WA Posts: 631	Re: my 68 shortbed build Keep the progress coming Posted via Mobile Device __________________ 67 SWB Custom "JANE" http://67-72chevytrucks.com/vboard/s...d.php?t=554024 Northwest C10's http://www.facebook.com/#!/groups/Norhtwestc10s/ Cameron sparks

01-11-2013, 09:15 AM	#522
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: my 68 shortbed build Nice job on the fenders __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

01-12-2013, 12:42 AM	#523
hotrodchevy1999 Hotrodchevy Join Date: Sep 2010 Location: Hot Springs NC Posts: 275	Re: my 68 shortbed build just check out you build thread nice work truck looks good __________________ 2017 1500 CREW CAB GMC 1997 C1500 Chevy 1971 CHEVY CHEVELLE SS 402BB : 1971 CHEVY C10 Stepside Project 71 cluncker http://67-72chevytrucks.com/vboard/s...ferrerid=89816 My Build Second Chance Suburban (SCS)http://67-72chevytrucks.com/vboard/s...d.php?t=424650

01-14-2013, 08:55 PM	#524
cstm68 Registered User Join Date: Jan 2007 Location: shoreline, wa Posts: 1,565	Re: my 68 shortbed build More progress on the inner fenders! Got them primed today. Just need to block them and stray some gloss black this weekend Posted via Mobile Device Posted via Mobile Device Attached Images __________________ 68 swb fleet bagged on 20's 327 with 4 speed http://67-72chevytrucks.com/vboard/s...d.php?t=223308 2014 Chevy 2500hd duramax CCLB

01-21-2013, 12:30 AM	#525
cstm68 Registered User Join Date: Jan 2007 Location: shoreline, wa Posts: 1,565	Re: my 68 shortbed build Fenders are done! Posted via Mobile Device Posted via Mobile Device Attached Images __________________ 68 swb fleet bagged on 20's 327 with 4 speed http://67-72chevytrucks.com/vboard/s...d.php?t=223308 2014 Chevy 2500hd duramax CCLB

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.