How about some pics of High Performance haulers. - Page 21 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tinydb84 · 08-07-2013, 06:13 PM

Quote:

Originally Posted by renegade8720

Here is a few pics of the one we are building.
1950 Chevy 5 window.

Renegade

Why is there both a 4 link and a whisbone? I have never seen that before...

familyfast64 · 10-18-2013, 02:30 AM

I don't think most of you would call this high performance by I figured it was appropriate.

64 swb/sbw
383ci 4bolt block
World product heads, roller rockers 3/8 hardened push rods, dual springs?
Healthy cam ? Hydraulic flat tappet
Edelbrock performer rpm / Holley street avenger 770cfm
Mallory unilite distributor
Jacobs pc 2000 ignition control box and coil
Coated headers?
3" dual exhaust with small bodied flowmasters?
later th350 ?
lokar shifter
ford 9" Mt n-50s drum rear / disc front

I'm still learning it but I've fallen hard for the trucks!
had to pick up straw for the pigs.

vht · 11-02-2013, 07:51 PM

We need more pics, I need motivation here people!

dinnut · 11-02-2013, 08:00 PM

picking up my medicine...

WhiteStar · 11-15-2013, 06:58 AM

Finally Finished the truck, I Looked at my Last post Back in like 2008, so this only took 5 yr's. And All though I didn't post Much I got a lot of valuable info here ,and I appreciate that.
I took it to track prior to paint, it had lowering springs from Eibach, and shocks to match on front, Basically Railroad car springs and Shocks, It Went 12.60 at 117 with 2.12 60ft.It Literally Smoked drag radials to the 1/8th .
I just finished painting it and stiffened up rear Coil Overs and went with some Moroso trick Springs and Comp Engineering drag Shocks.
If all goes well, hoping for Mid Elevens no N20, Mid Tens With. Haven't been able to try n2o Yet.. There was zero weight transfer before, Now its Got some Bounce in it..
Combo is 10-1 496' Single Plane, with .780 Lift Roller, 850 quik fuel out of box, Dart 320s mild port job, T400 with 3500Cnvtr ,Dana 60 Detroit locker 4.30 gears. Tube upper and lower a arms, CCP Bars and coil overs, Everything Done Here at House including paint. But After 5 yrs, that's probably not very impressive. Anyway I like it, and again Thanks to this site for a lot of tips.

WhiteStar · 11-15-2013, 07:16 AM

Here's a picture from San Antonio Raceway back in March.

383Ram · 11-15-2013, 09:09 AM

WOW!!, That is Bad A$$ looking. Definatly better with the two tone.

WhiteStar · 11-15-2013, 11:11 AM

Thanks, gonna try and go do the arm drop race in San Antonio tomorrow nite.

dinnut · 11-16-2013, 11:30 PM

Wow! That's a good looking longed. What's the wheel size and tire size? Is it mini tubbed? Did you narrow the dana 60? Im going for the same look on my truck and any help would be appreciated

WhiteStar · 11-17-2013, 06:20 AM

Quote:

Originally Posted by dinnut

Wow! That's a good looking longed. What's the wheel size and tire size? Is it mini tubbed? Did you narrow the dana 60? Im going for the same look on my truck and any help would be appreciated

Thanks , I had some other wheel wells from another truck and sectioned them, they look factory but 4" wider. The Rear is from Drivetrain Specialties and is 2" narrower than stock, 15x4s and 15x12 w-315 Drag Radials, and Mt Front runners.

btd71 · 01-12-2014, 01:27 AM

Quote:

Originally Posted by ostncoln

saw this one over at spring bash year before last

that is BADASS!!!

HEADTURNINGC10 · 06-03-2014, 05:10 PM

This is my truck currently running a 350 mild minor with turbo 350, I was hoping y'all could shed some light I'm looking into building a 355 everywhere I look says something else, is a stock block worth building for high horse power 600-700 n/a or with a blower (4 bolt main)?

dragtrucks · 06-03-2014, 07:05 PM

Updated pictures or our trucks.

dragtrucks · 06-03-2014, 07:07 PM

Freedom Rocks Racing Team with Jordin DeWald driving the 37 Chevy and Maegan O'Brian driving the S-10 sponsored by MarksDWG Dri Wash n Guard Waterless Car Wash and Polish.

1Bad62Pro/Street · 06-03-2014, 07:08 PM

Quote:

Originally Posted by dragtrucks

Updated pictures or our trucks.

What classes are you runn'in?

dragtrucks · 06-03-2014, 07:10 PM

Jordin is going to start out in Super Gas and Maegan is starting out in Super Street.

1Bad62Pro/Street · 06-03-2014, 07:12 PM

Quote:

Originally Posted by dragtrucks

Jordin is going to start out in Super Gas and Maegan is starting out in Super Street.

What kinds fuel are you using in the 37 Chevy?

dragtrucks · 06-03-2014, 07:14 PM

C-16, this setup is for her to get seat time, then in a few years we will change over to blown alcohol.

1Bad62Pro/Street · 06-03-2014, 07:16 PM

Quote:

Originally Posted by dragtrucks

C-16, this setup is for her to get seat time, then in a few years we will change over to blown alcohol.

Nice!! Keep us updated and if you can some videos down the track!

dragtrucks · 06-03-2014, 07:18 PM

I have dragtrucks on facebook.
https://www.facebook.com/groups/234140015756/

regan wilson · 06-04-2014, 07:54 AM

Quote:

Originally Posted by dragtrucks

Jordin is going to start out in Super Gas and Maegan is starting out in Super Street.

Maybe I will see yall in Shreveport or Noble.

flamingbig10 · 07-21-2014, 12:30 AM

68 C-10 KID · 07-25-2014, 12:28 PM

Hood and bumper finally painted after many years.

**Hart_Rod** · 07-26-2014, 09:36 AM

Quote:

Originally Posted by 68 C-10 KID

Hood and bumper finally painted after many years.

Looks great! Is that a glass hood?

68 C-10 KID · 07-26-2014, 05:27 PM

Yes it's glass.

10-18-2013, 02:30 AM	#502
familyfast64 Registered User Join Date: Sep 2013 Location: Cheney, Kansas Posts: 337	Re: How about some pics of High Performance haulers. I don't think most of you would call this high performance by I figured it was appropriate. 64 swb/sbw 383ci 4bolt block World product heads, roller rockers 3/8 hardened push rods, dual springs? Healthy cam ? Hydraulic flat tappet Edelbrock performer rpm / Holley street avenger 770cfm Mallory unilite distributor Jacobs pc 2000 ignition control box and coil Coated headers? 3" dual exhaust with small bodied flowmasters? later th350 ? lokar shifter ford 9" Mt n-50s drum rear / disc front I'm still learning it but I've fallen hard for the trucks! had to pick up straw for the pigs. Attached Images __________________ Live and let live

11-02-2013, 07:51 PM	#503
vht Registered User Join Date: Jun 2013 Location: Brooksville Ky Posts: 531	Re: How about some pics of High Performance haulers. We need more pics, I need motivation here people!

11-02-2013, 08:00 PM	#504
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	Re: How about some pics of High Performance haulers. picking up my medicine... Attached Images __________________ 70 longbed 496/th400/Ford 9"

11-15-2013, 06:58 AM	#505
WhiteStar Registered User Join Date: Dec 2006 Location: Goliad...Texas Posts: 30	Re: How about some pics of High Performance haulers. Finally Finished the truck, I Looked at my Last post Back in like 2008, so this only took 5 yr's. And All though I didn't post Much I got a lot of valuable info here ,and I appreciate that. I took it to track prior to paint, it had lowering springs from Eibach, and shocks to match on front, Basically Railroad car springs and Shocks, It Went 12.60 at 117 with 2.12 60ft.It Literally Smoked drag radials to the 1/8th . I just finished painting it and stiffened up rear Coil Overs and went with some Moroso trick Springs and Comp Engineering drag Shocks. If all goes well, hoping for Mid Elevens no N20, Mid Tens With. Haven't been able to try n2o Yet.. There was zero weight transfer before, Now its Got some Bounce in it.. Combo is 10-1 496' Single Plane, with .780 Lift Roller, 850 quik fuel out of box, Dart 320s mild port job, T400 with 3500Cnvtr ,Dana 60 Detroit locker 4.30 gears. Tube upper and lower a arms, CCP Bars and coil overs, Everything Done Here at House including paint. But After 5 yrs, that's probably not very impressive. Anyway I like it, and again Thanks to this site for a lot of tips. Attached Images

11-15-2013, 07:16 AM	#506
WhiteStar Registered User Join Date: Dec 2006 Location: Goliad...Texas Posts: 30	Re: How about some pics of High Performance haulers. Here's a picture from San Antonio Raceway back in March. Attached Images

11-15-2013, 09:09 AM	#507
383Ram Registered User Join Date: Apr 2009 Location: Truckville, The Capital of NY Posts: 217	Re: How about some pics of High Performance haulers. WOW!!, That is Bad A$$ looking. Definatly better with the two tone. __________________ . 454/4 speed, '85 Dodge Ram hybrid build in progress 454, PP heads, Dual 500 CFM cabs, 'Vette manifolds. First time out---spinning for half track Slooowww build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=348050 Engine build thread at: http://www.chevelles.com/forums/showthread.php?t=326289

11-15-2013, 11:11 AM	#508
WhiteStar Registered User Join Date: Dec 2006 Location: Goliad...Texas Posts: 30	Re: How about some pics of High Performance haulers. Thanks, gonna try and go do the arm drop race in San Antonio tomorrow nite.

11-16-2013, 11:30 PM	#509
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	Re: How about some pics of High Performance haulers. Wow! That's a good looking longed. What's the wheel size and tire size? Is it mini tubbed? Did you narrow the dana 60? Im going for the same look on my truck and any help would be appreciated __________________ 70 longbed 496/th400/Ford 9"

06-03-2014, 05:10 PM	#512
HEADTURNINGC10 Registered User Join Date: Mar 2014 Location: Mechanicsville, Virginia Posts: 65	Re: How about some pics of High Performance haulers. This is my truck currently running a 350 mild minor with turbo 350, I was hoping y'all could shed some light I'm looking into building a 355 everywhere I look says something else, is a stock block worth building for high horse power 600-700 n/a or with a blower (4 bolt main)? Attached Images

06-03-2014, 07:05 PM	#513
dragtrucks Registered User Join Date: Feb 2003 Location: Baytown, Texas Posts: 21	Re: How about some pics of High Performance haulers. Updated pictures or our trucks. Attached Images __________________ DeWald Motorsports Dragtrucks.com FreedomRocksRacing.com MarkDWG.com

06-03-2014, 07:07 PM	#514
dragtrucks Registered User Join Date: Feb 2003 Location: Baytown, Texas Posts: 21	Re: How about some pics of High Performance haulers. Freedom Rocks Racing Team with Jordin DeWald driving the 37 Chevy and Maegan O'Brian driving the S-10 sponsored by MarksDWG Dri Wash n Guard Waterless Car Wash and Polish. Attached Images __________________ DeWald Motorsports Dragtrucks.com FreedomRocksRacing.com MarkDWG.com

06-03-2014, 07:10 PM	#516
dragtrucks Registered User Join Date: Feb 2003 Location: Baytown, Texas Posts: 21	Re: How about some pics of High Performance haulers. Jordin is going to start out in Super Gas and Maegan is starting out in Super Street. __________________ DeWald Motorsports Dragtrucks.com FreedomRocksRacing.com MarkDWG.com

06-03-2014, 07:14 PM	#518
dragtrucks Registered User Join Date: Feb 2003 Location: Baytown, Texas Posts: 21	Re: How about some pics of High Performance haulers. C-16, this setup is for her to get seat time, then in a few years we will change over to blown alcohol. __________________ DeWald Motorsports Dragtrucks.com FreedomRocksRacing.com MarkDWG.com

06-03-2014, 07:18 PM	#520
dragtrucks Registered User Join Date: Feb 2003 Location: Baytown, Texas Posts: 21	Re: How about some pics of High Performance haulers. I have dragtrucks on facebook. https://www.facebook.com/groups/234140015756/ __________________ DeWald Motorsports Dragtrucks.com FreedomRocksRacing.com MarkDWG.com

07-21-2014, 12:30 AM	#522
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: How about some pics of High Performance haulers. __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326



Register or Log In To remove these advertisements.

07-25-2014, 12:28 PM	#523
68 C-10 KID Mean Green Join Date: Sep 2007 Location: Portland, OR Posts: 522	Re: How about some pics of High Performance haulers. Hood and bumper finally painted after many years. Attached Images __________________ 427 SBC 683HP & 590ftlbsTRQ @ fly wheel. 60'-1.38 1/4-10.43 MPH-124.6 New ET current 4/2019 AKA MEAN GREEN.

07-26-2014, 05:27 PM	#525
68 C-10 KID Mean Green Join Date: Sep 2007 Location: Portland, OR Posts: 522	Re: How about some pics of High Performance haulers. Yes it's glass. __________________ 427 SBC 683HP & 590ftlbsTRQ @ fly wheel. 60'-1.38 1/4-10.43 MPH-124.6 New ET current 4/2019 AKA MEAN GREEN.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.