MY build thread... - Page 21 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Alan's Classic · 08-30-2012, 10:18 PM

Congrats Troy!
Posted via Mobile Device

shortbed70 · 08-30-2012, 10:37 PM

Quote:

Originally Posted by Alan's Classic

Congrats Troy!
Posted via Mobile Device

Thanks Alan! How's yours running?
Posted via Mobile Device

Alan's Classic · 08-30-2012, 10:41 PM

I'm pretty happy. Still need to play with it a little more. Can't leave well enough alone.

Posted via Mobile Device

shortbed70 · 08-30-2012, 10:48 PM

Quote:

Originally Posted by Alan's Classic

I'm pretty happy. Still need to play with it a little more. Can't leave well enough alone.

Posted via Mobile Device

Well be careful there. I kinda created some of my problems that way lol..
Posted via Mobile Device

Modges'66 · 08-31-2012, 10:49 PM

Wow! Very cool truck!
I was just sitting here wondering about your valve cover leaks, and thinking that maybe you could be tightening them down too much, and pinching the gaskets in half. The bolts only need to be a little more than snug...I know this from my own experiences, that when this happens they leak like a mutha!...Just a thought.

shortbed70 · 08-31-2012, 10:53 PM

Oh yea got all the topend leaks fixed now just a small oil pan gasket leak to worry about. Thanks for checking out my build... More to come this winter! New engine I believe!!!
Posted via Mobile Device

shortbed70 · 09-20-2012, 08:34 PM

well heres how my baby sits now....
New oilpan and gasket showed up today but Im working on a 454 bbc To possibly take the smallblocks place
Notice all the oil on the pass side fenderwell

shortbed70 · 09-23-2012, 01:01 PM

Well motor is out sitting on the stand and stared tearing it down. Looks like I have found a small figment issues with the patriot heads. Need to run a bigger bead of sealant across the front and back of block. Still undecided if I'm going to stay with the small block or go with the 454.
Posted via Mobile Device don't know why te pic is that way but this is it painted again just incase it goes back in.

shortbed70 · 09-25-2012, 09:37 PM

Well awaiting parts so figure I would post a few pics of a truck I painted awhile back. Makes me want to paint mine...cleared,cut and buffed! Never done a two tone with a painted stripe! Put wheel arches in the bed and modified the fronts to take the eyebrow look out. Custom black with some red pearl and torch red with silver stripe. Painted in a two car garage...
Posted via Mobile Device

tubbedII · 09-25-2012, 10:19 PM

Ya... Good job!
Posted via Mobile Device

shortbed70 · 09-25-2012, 10:42 PM

Thanks I love ppg products. This is the second one I've used ppg through out and love it....
Posted via Mobile Device

shortbed70 · 09-25-2012, 10:46 PM

Here's another. My neighbor and our motivation fluid..
Posted via Mobile Device

shortbed70 · 10-04-2012, 11:45 PM

Still waiting on waterpump and intake gaskets but here it is as of today. My wallets lighter but hopefully these parts will fix my leaking issues. The vortec stuff fits so much better!!!
Posted via Mobile Device

shortbed70 · 10-15-2012, 10:53 PM

Fixen to get interesting

..... Stay tuned!!!
Posted via Mobile Device

shortbed70 · 10-27-2012, 06:50 PM

My next project...
Posted via Mobile Device

shortbed70 · 10-27-2012, 06:52 PM

And new motor!!!
Posted via Mobile Device

likaroc13 · 10-27-2012, 10:08 PM

new motor looks sweet! nice job on the paint work as well

shortbed70 · 10-27-2012, 10:29 PM

Thanks on the motor... Paint isn't done yet just prepped up...
Posted via Mobile Device

likaroc13 · 10-28-2012, 01:58 AM

Quote:

Originally Posted by shortbed70

Thanks on the motor... Paint isn't done yet just prepped up...
Posted via Mobile Device

sorry, I was referring to the other truck's paint job

...i'm sure yours will look great as well!

shortbed70 · 10-28-2012, 02:07 AM

Oh thanks... I forgot I posted those pics. Brain fart on my part...
Posted via Mobile Device

shortbed70 · 10-30-2012, 11:12 PM

Ok let's see if the pic post right
Posted via Mobile Device

shortbed70 · 10-30-2012, 11:16 PM

Another! My inners aren't the straightest but its a driver.
Posted via Mobile Device

baggedbigblock · 10-31-2012, 08:37 AM

I love the truck but are you going to put the front bumper on? And can you paint the headlight trim the color of the grill. These 2 things stand out like a sore thumb.
Posted via Mobile Device

shortbed70 · 10-31-2012, 09:11 AM

Well I am getting a bumper sooner or later and the headlight trim is going to be painted also sooner or later... Still need interior,bed wood and some other odd and ends but the money issue is killing me.
Posted via Mobile Device

baggedbigblock · 10-31-2012, 09:29 AM

I'm with you. I thought mine would be done 6 months and 4k ago
Posted via Mobile Device

08-30-2012, 10:18 PM	#1
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: MY build thread... Congrats Troy! Posted via Mobile Device __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

08-30-2012, 10:41 PM	#3
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: MY build thread... I'm pretty happy. Still need to play with it a little more. Can't leave well enough alone. Posted via Mobile Device __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

08-31-2012, 10:49 PM	#5
Modges'66 Registered User Join Date: Feb 2012 Location: Grand Rapids, Michigan, otherwise known as Beer City U.S.A. Posts: 1,081	Re: MY build thread... Wow! Very cool truck! I was just sitting here wondering about your valve cover leaks, and thinking that maybe you could be tightening them down too much, and pinching the gaskets in half. The bolts only need to be a little more than snug...I know this from my own experiences, that when this happens they leak like a mutha!...Just a thought.

08-31-2012, 10:53 PM	#6
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Oh yea got all the topend leaks fixed now just a small oil pan gasket leak to worry about. Thanks for checking out my build... More to come this winter! New engine I believe!!! Posted via Mobile Device __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

09-20-2012, 08:34 PM	#7
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... well heres how my baby sits now.... New oilpan and gasket showed up today but Im working on a 454 bbc To possibly take the smallblocks place Notice all the oil on the pass side fenderwell Attached Images __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

09-23-2012, 01:01 PM	#8
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Well motor is out sitting on the stand and stared tearing it down. Looks like I have found a small figment issues with the patriot heads. Need to run a bigger bead of sealant across the front and back of block. Still undecided if I'm going to stay with the small block or go with the 454. Posted via Mobile Device don't know why te pic is that way but this is it painted again just incase it goes back in. Attached Images __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

09-25-2012, 09:37 PM	#9
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Well awaiting parts so figure I would post a few pics of a truck I painted awhile back. Makes me want to paint mine...cleared,cut and buffed! Never done a two tone with a painted stripe! Put wheel arches in the bed and modified the fronts to take the eyebrow look out. Custom black with some red pearl and torch red with silver stripe. Painted in a two car garage... Posted via Mobile Device Attached Images __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

09-25-2012, 10:19 PM	#10
tubbedII needs more $$$ Join Date: Mar 2004 Location: Sacramento Posts: 1,936	Re: MY build thread... Ya... Good job! Posted via Mobile Device __________________ 1970 2wd Blazer

09-25-2012, 10:42 PM	#11
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Thanks I love ppg products. This is the second one I've used ppg through out and love it.... Posted via Mobile Device __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

09-25-2012, 10:46 PM	#12
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Here's another. My neighbor and our motivation fluid.. Posted via Mobile Device Attached Images __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

10-04-2012, 11:45 PM	#13
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Still waiting on waterpump and intake gaskets but here it is as of today. My wallets lighter but hopefully these parts will fix my leaking issues. The vortec stuff fits so much better!!! Posted via Mobile Device Attached Images __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

10-15-2012, 10:53 PM	#14
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Fixen to get interesting..... Stay tuned!!! Posted via Mobile Device __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

10-27-2012, 06:50 PM	#15
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... My next project... Posted via Mobile Device Attached Images __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

10-27-2012, 06:52 PM	#16
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... And new motor!!! Posted via Mobile Device Attached Images __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

10-27-2012, 10:08 PM	#17
likaroc13 Rollin' Old Skool Join Date: Jun 2007 Location: Hattiesburg, MS Posts: 5,371	Re: MY build thread... new motor looks sweet! nice job on the paint work as well __________________ _____________________________________________ Phillip My Build threads: 1966 Chevy C-10 "Black Betty" shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction) http://67-72chevytrucks.com/vboard/s...ighlight=betty 1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver) http://67-72chevytrucks.com/vboard/s...d.php?t=601142 Pics: '66 C-10 https://flic.kr/s/aHsjHWD4h9 '97 Tahoe https://flic.kr/s/aHsjGZ7wKP '93 C-1500 https://flic.kr/s/aHskxdpdnQ '88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md Previous Rides: 1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold) 1993 Chevy C-1500 short/step Retro-Rod (Sold) 1988 S-10 Blazer 2dr/2wd mild custom (Sold)



Register or Log In To remove these advertisements.

10-27-2012, 10:29 PM	#18
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Thanks on the motor... Paint isn't done yet just prepped up... Posted via Mobile Device __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

10-28-2012, 02:07 AM	#20
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Oh thanks... I forgot I posted those pics. Brain fart on my part... Posted via Mobile Device __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

10-30-2012, 11:12 PM	#21
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Ok let's see if the pic post right Posted via Mobile Device Attached Images __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

10-30-2012, 11:16 PM	#22
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Another! My inners aren't the straightest but its a driver. Posted via Mobile Device Attached Images __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

10-31-2012, 08:37 AM	#23
baggedbigblock Registered User Join Date: Oct 2010 Location: Rich Virginia Posts: 336	Re: MY build thread... I love the truck but are you going to put the front bumper on? And can you paint the headlight trim the color of the grill. These 2 things stand out like a sore thumb. Posted via Mobile Device

10-31-2012, 09:11 AM	#24
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Well I am getting a bumper sooner or later and the headlight trim is going to be painted also sooner or later... Still need interior,bed wood and some other odd and ends but the money issue is killing me. Posted via Mobile Device __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

10-31-2012, 09:29 AM	#25
baggedbigblock Registered User Join Date: Oct 2010 Location: Rich Virginia Posts: 336	Re: MY build thread... I'm with you. I thought mine would be done 6 months and 4k ago Posted via Mobile Device

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.